Losi MLM Brushless, FS/FT(1/10th ST brushless) also bunch Mini Slider stuff
#1
Losi MLM Brushless, FS/FT(1/10th ST brushless) also bunch Mini Slider stuff
looking to sell my Losi Mini Late Model, used to be a mini slider but did the FULL conversion, chassis and all! ran for about half the indoor season and about to move outdoors to race and isn't a class for it at the LHS outdoors.
Here is most of what all comes with it.....
1- McCallister Batesville body paint did not hold too well so put the chrome tape on bottom to cover where paint came off,body is used but with lots of life left
2- 1/18th Castle Creations CM-2042 brushless motors(4200KV) both in excellent condition.
1- 1/18th Sidewinder ESC works excellent but missing the original plastic casing on it.
2- Flightmax 1600MaH 2S 20c Lipo's, both packs are balanced great and work perfectly.
2- RX-280 stock motors, need new brushes
2- Factory mini ESC's
4- has 2 losi front Foams and 2 rear foams on it right now
2- spare rear Losi foam tires All tires are still in great shape. one has a tiny chunk out of it but nothing that affects its performance.
1- rear bumper,nerf bar set still new in package
3- Aluminum adjustable shocks
2- factory front shocks
2- factory rear shocks
--couple extra springs, red,yellow and silver as well as a bunch of shock spacers and other shock pieces
1- BSR front bulkhead/chassis brace
26- Pinions from size 9T-24T mostly Robinson metal gears
5- Spur gears...50T,54T,58T,and 2 60T's
1- Aluminum steering assembly
2- Titanium turnbuckles
6- Aluminum adjustable turnbuckles
1- Aluminum servo tunbuckle
-- Have a few factory turnbuckles as well as a bunch of ball studs and ball cups.
--have some factory replacement parts such as.. upper bulkhead,3 caster blocks,3 c hubs, 4 servo cap thingys,stock steering assembly, extra body posts for front bumper, etc. Also a full screw kit for the car.
Late Model right now has no Receiver in it and no Transmitter but I can throw in a Traxxas TQ 27Mhz RX/TX for free
Have some other parts from when it was a slider I will sell or throw in as well if you want them, here they are...
1-New in package front and rear wing kit
4- Rear chrome wheel/tires 2 new in package other 2 used(LOSB1182)
4- Fron chrome wheel/tires 2 new in package oher 2 used(LOSB1172)
2- complete Mini-Slider bodies 1 new in package with complete decal sheet other is the silver body with red decals
1- Mini Slider chassis
1-Complete used rollcage for the Mini-Slider
1- used silver/red front and rear wing set
here is the link to my photobucket album with the pictures
http://s71.photobucket.com/albums/i124/rpeace9803/Losi/
Here is most of what all comes with it.....
1- McCallister Batesville body paint did not hold too well so put the chrome tape on bottom to cover where paint came off,body is used but with lots of life left
2- 1/18th Castle Creations CM-2042 brushless motors(4200KV) both in excellent condition.
1- 1/18th Sidewinder ESC works excellent but missing the original plastic casing on it.
2- Flightmax 1600MaH 2S 20c Lipo's, both packs are balanced great and work perfectly.
2- RX-280 stock motors, need new brushes
2- Factory mini ESC's
4- has 2 losi front Foams and 2 rear foams on it right now
2- spare rear Losi foam tires All tires are still in great shape. one has a tiny chunk out of it but nothing that affects its performance.
1- rear bumper,nerf bar set still new in package
3- Aluminum adjustable shocks
2- factory front shocks
2- factory rear shocks
--couple extra springs, red,yellow and silver as well as a bunch of shock spacers and other shock pieces
1- BSR front bulkhead/chassis brace
26- Pinions from size 9T-24T mostly Robinson metal gears
5- Spur gears...50T,54T,58T,and 2 60T's
1- Aluminum steering assembly
2- Titanium turnbuckles
6- Aluminum adjustable turnbuckles
1- Aluminum servo tunbuckle
-- Have a few factory turnbuckles as well as a bunch of ball studs and ball cups.
--have some factory replacement parts such as.. upper bulkhead,3 caster blocks,3 c hubs, 4 servo cap thingys,stock steering assembly, extra body posts for front bumper, etc. Also a full screw kit for the car.
Late Model right now has no Receiver in it and no Transmitter but I can throw in a Traxxas TQ 27Mhz RX/TX for free
Have some other parts from when it was a slider I will sell or throw in as well if you want them, here they are...
1-New in package front and rear wing kit
4- Rear chrome wheel/tires 2 new in package other 2 used(LOSB1182)
4- Fron chrome wheel/tires 2 new in package oher 2 used(LOSB1172)
2- complete Mini-Slider bodies 1 new in package with complete decal sheet other is the silver body with red decals
1- Mini Slider chassis
1-Complete used rollcage for the Mini-Slider
1- used silver/red front and rear wing set
here is the link to my photobucket album with the pictures
http://s71.photobucket.com/albums/i124/rpeace9803/Losi/
#2
here are a few pics just so you get an idea of it before you go to the above link for more pics.
#3
ttt
Last edited by rpeace9803; 03-08-2010 at 08:54 PM.
#4
Looking to sell to get a brushless setup for my T4 or Slash so will consider trades for brushless systes
#5
Ttt! Price is OBO. Or trade for 1/10th brushless system
#6
Price drop....$185 shipped
That will be minus the mini-Slider stuff
$190 shipped with the RX/TX
That will be minus the mini-Slider stuff
$190 shipped with the RX/TX
#7
this car was NEVER ran outside, only inside on a carpet track.
WILL seperate the Brushless ESC and BOTH motors as a package, will throw in all of the metal set screw gears with it and the Turnigy gear tray. Will Take $100 shipped for the ESC, BOTH brushless motors and the metal pinions so about 20 or so pinions, the other 6 or so are plastic for the stock motors.
So $100 shipped for all Brushless items and set screw pinions as well as pinion tray
$90 for everything else minus the TX/RX and minus the mini slider parts..can add TX/RX and mini slider parts for little extra
WILL seperate the Brushless ESC and BOTH motors as a package, will throw in all of the metal set screw gears with it and the Turnigy gear tray. Will Take $100 shipped for the ESC, BOTH brushless motors and the metal pinions so about 20 or so pinions, the other 6 or so are plastic for the stock motors.
So $100 shipped for all Brushless items and set screw pinions as well as pinion tray
$90 for everything else minus the TX/RX and minus the mini slider parts..can add TX/RX and mini slider parts for little extra
#8
Going to bed bump... someone throw me some offers..and i dont mean low ball ones either
#9
morning bump
#10
$180 shipped for everything in the ad
Or still for trade for 1/10th brushless system for T4 or Slash
Or still for trade for 1/10th brushless system for T4 or Slash
#11
$160 shipped TONIGHT ONLY tomorrow will go back up some.
Really want this stuff gone, need to get foam tires and brushless system for my RC10T4
Really want this stuff gone, need to get foam tires and brushless system for my RC10T4
#12
double post sorry
#13
last chance to get it ALL...got someone about to part it up
$150 SHIPPED
$150 SHIPPED