RS4 rollers, receivers, Lipos all priced to sell
 

I will be posting a few items in the next day or two to free up some funds for another project. All prices do not include shipping as that will depend on your location and how much or little will be shipped. I use usps priority or 1st class, whatever is the cheapest, or whatever is requested. PM for total shipping cost with your zip code or any questions or offers. Paypal preferred, [email protected]. Every item posted with a price can be sold by itself or with anything else posted. No trades, here is a condensed list

RS4 rollers
FM receivers/ FM radio/ FM modules
Servos
Apogee lipos
LRP brushless motors
AM radio and receivers
Tires, rims, foams

1st generation RS4 roller/almost RTR
 

Item #1 is probably the 1st generation RS4. It has a gearbox for the rear and belt for the front. Fully equipped with ball bearings including the belt tensioner. Fiberglass chassis and top deck, front universals. Will include some new parts, set of F/R arms, pair of steering knuckles, plastic rear ball diff gear, and plastic gearbox. Pictures shows a 21.5T LRP and LRP ESC which can be included or not. Front and rear diffs are smooth, shocks will need the oil changed. I had this set up for VTA but had not had the chance. Will include a set rubber slicks.
$25 for the roller, SOLD
$35 for the motor SOLD
$55 for the LRP Sphere. SOLD

Can also be made RTR with basic AM radio, ESC, and stock brushed motor for additional $30.

Newer RS4 roller
 

Item #2 is a newer RS4 roller. Not sure of the exact version, if you know, send me a PM. Carbon fiber chassis, top deck, shock towers, and pulley side plate. Front and rear universals. Aluminum rear hub. Front one-way. Has a tower standard servo that I will leave in the chassis.
$40 plus shipping

Can also be made RTR with basic AM radio, ESC, and stock brushed motor for additional $30.

SOLD

Another RS4 roller
 

Item #3 is another RS4 roller. I don't know the version of this one either. Has carbon fiber chassis and top deck. Front and rear purple CVD's. Diffs on this one could use a re-build. Front belt is useable, but could use a new one.
$35 plus shipping

Can also be made RTR with basic AM radio, ESC, and stock brushed motor for additional $30.

SOLD

I really want a new chasis especially a roller, I will keep in mind the RS4 2nd Generation. If I buy shipping might be a lot because i'm in Florida. I will have money to buy a chasis on march 8.

Futaba and Hitec FM receivers, Futaba FM radio
 

I have two Futaba R303FHS receivers on 75MHz. These operate with high response if your transmitter can or standard FM. These are synthesized and can be dialed to any of the 30 available channels at any time. One has full length anntenna, the other is half length. $22 each ONE SOLD, ONE LEFT

I have three Hitec HFS-03MT receivers on 75MHz FM. All have full length anntennas, $11 each. TWO SOLD, ONE LEFT

One Hitec HFS-03MM on 27 MHz, full length anntenna, $11.

One Hitec HIS-03MK on 75MHz, full length anntenna, $11.

One new-in-package Hitec Synth DX. This also is synthesized on 75MHz. Can be programmed for fail-safe positions and is auto shifting. This is the only receiver I have that is compatible with all FM radios including airtronics, JR, KO, Futaba, and of course Hitec. Every thing else I have is Futaba/Hitec only. This one for $22 SOLD

Futaba Magnum Junior FM 75MHz with steering D/R and throttle ATV. Radio has no battery tray and is modified to accept a 9-cell Nimh 2000mah which is included. Will include channel 80 crystal. Will also include matching receiver cyrstal if bought with any crystal based receiver listed just above. $15

Futaba 75MHz FM modules for 3pk/3pks/3pj
 

Two modules on 75 MHz FM. Both with serial# stickers in-tact. One on channel 77, the other on 62. Please specify which you would like. $6 each plus shipping
Channel 62 SOLD

Hitec and Futaba servos
 

All servos are new and un-mounted with all ears in-tact. No packaging materials or servo arms included.
Hitec HS635HB 0.15sec/83oz @6v, karbonite gears, $18. SOLD
Hitec HS965MG 0.10sec/132oz @6v, $37. SOLD
Hitec HS985MG 0.13sec/172oz @ 6v, $37. SOLD
Futaba S9156 0.17sec/340oz @6v, $70. SOLD
Hitec HSC-5998TG 0.19sec/250oz @6v, $70 SOLD

New Apogee lipos
 

These are all new and have no plugs soldered yet. They do have balance ports

I have four 2-cell Apogee Dominator hard case packs. 4600mah 25C, they have the balance plug and main wires coming out of the top of the case on opposite corners on the same side. It has a smooth bottom without the nubs like my intellect packs. The size is 46mm X 25mm X 138mm. These packs will fit where side-by-side packs originally fit. They will not fit in cars that only accept stick packs as these packs are a rectangular shape and do not have curved sides like a stick pack. $40 each

I have four Apogee 3-cell 3800 20C packs. They have balance connectors and are ready for your own main plug. They are not hard cased but shrink-wrapped. They are the size of a standard 6-cell stick pack but a little taller. They fit in cars where height of the pack does not matter like the SC10 or slash. Each pack is 145mm X 45mm X 33mm tall. $25 each

One 2-cell sold, two on hold (trade) one left
Two 3-cell sold, two left

New-in-package LRP X-11 brushless motors
 

I have five NIP LRP X-11 brushless motors. All have removable sensor wires included

3.5T $40
4.5T $40 SOLD
21.5T stockspec $40 this is a separate from the one I have listed with the roller. SOLD

7.5T $45 SOLD
8.5T $45 SOLD

Cheap operational AM radios/receivers
 

All have matching receivers with cyrstals. All have un-bent anntennas and all receivers have full length anntennas.

1) Hot Bodies (Futaba based) HT-2 has steering D/R on channel 4, 27MHz. $7
2) Futaba Magnum Sport FP-T2PB on channel 68, 75MHz. $6 SOLD
3) Futaba Magnum Junior FP-T2PBKA on channel 78, 75MHz. Steering D/R and throttle ATV. Modified to accept external battery which is included $10
4) Cirrus 2CAM with steering D/R on channel 5, 27MHz. $6
5) Hitec Agressor with steering D/R on channel 63, 75MHz. $10
6) Hitec Lynx Sport on channel 70, 75MHz. $6

PM if you have specific questions

trades?

Just some information: The first car is an original RS4. Does it have the slipper clutch behind the spur gear?

Second car looks like an HPI Pro. Not Pro 2. Not Pro 3. Not Pro 4. Pro.

Third car looks like an HPI Pro 2 with the stickpack battery holders. I happen to have, brand new, the saddle-pack holders for that car. I also happen to have a Pro 2 for sale :)

Thanks for the info, I appreciate it as well as potential buyers. The first car does not have a slipper clutch, none of them do. Thanks again

I am interested in the second RS4.

PM sent.......