Phi 09' X 2
09-28-2009, 09:49 PM
#4
Bump for Casey. Congrats on the new ride dude.
09-29-2009, 05:06 AM
#5
Tech Initiate
bump for Casey,
it might help if you wrote exactly what your giving for spares?
and couldn't hurt to mention your IIC finishes with both?
it might help if you wrote exactly what your giving for spares?
and couldn't hurt to mention your IIC finishes with both?
09-29-2009, 06:02 AM
#6
BUMP for casey!
09-29-2009, 11:25 AM
#7
Thanks guys!
I havn't listed the parts yet because I simply havn't broken down whats actually here yet, but I'll be doing that and taking pics at the track tonight.
The foam chassis placed a disapointing 2nd place overall with multiple TQ runs in qualifying that I botched in lap traffic. The setup on it right now makes the car look like it's on rails and hold a 13.5 very well, but really excells with a 17.5. Maybe a spring change in the front for a 13.5.
The Rubber chassis had multiple a-main runs going that I once again botched in lap traffic.
Short story, these are both A-Main chassis.
pics and lists to follow soon.
and to clarify, I'm only selling because I'm with Schumacher now.
I havn't listed the parts yet because I simply havn't broken down whats actually here yet, but I'll be doing that and taking pics at the track tonight.
The foam chassis placed a disapointing 2nd place overall with multiple TQ runs in qualifying that I botched in lap traffic. The setup on it right now makes the car look like it's on rails and hold a 13.5 very well, but really excells with a 17.5. Maybe a spring change in the front for a 13.5.
The Rubber chassis had multiple a-main runs going that I once again botched in lap traffic.
Short story, these are both A-Main chassis.
pics and lists to follow soon.
and to clarify, I'm only selling because I'm with Schumacher now.
10-04-2009, 06:38 PM
#9
phi
hi
send you a pm
arthur
send you a pm
arthur
10-05-2009, 02:52 PM
#10
you got a pm
10-05-2009, 05:31 PM
#12
O.K. sorry for the delay in getting these posted, busy busy busy. ….
In short, both cars still have plastic toe blocks and the foam car has plastic diff carrier. Other than that, they are both completely hopped up with ceramic balls, aluminum knuckles, uprights, carriers, hubs. The foam car was $ at Vegas, I really wouldn’t change a thing. The rubber setup is pretty awesome especially on asphalt right now, but isn’t too shabby on carpet either.
Over view of the whole package: Not mentioned later on are the 2 full sets of black springs, full set of silver springs, AE shock oil (20,25,30,35, 60 & 70), 2 sets of rubber tires (blues), 1 set of foam tires (magenta), spare battery strap and roughly eight blades, 12 hinge pins, 3 hex pins, and tamiya arms if you are feeling frisky. Setup board also comes with. I could be missing something, but if it's laid out in the pic's and not listed, it's included.
Left side:
Middle:
Right side:
Close up of spare shocks (built without oil in) ball cups, toe block inserts (2 bags worth), new bag of toe blocks, 2 new rear belts (1nip), new 4 degree castor blocks, new shock shaft bottoms:
Close up of 2 rows worth of toe blocks, original pulleys, 100t spur gear, 3 35 arms, 2 replacement outdrives for 1way, 2 one ways, a set of thin and thick toe block shims, an extra shock tower to be used for bulking up the tower only, old and new diff wrenches, new diff rings, diff grease, body hold downs, specialized raised ball studs, new front king pins, medium sway bar, servo saver, washers:
Close up to show stock steering, diff holders, c hubs, rear uprights, tamale shock tower braces, 6 degree aluminum c hubs, aluminum rear diff holder (back), new diff outdrives, enough stock balls to do 3 diffs, 2 thin wheel hexes:
Hub bearings, sway bar, shims, screw hardware, layshaft c spacers, brass bushings for alum. Knuckles:
More pics for your perusal,
Rubber Tire –
From the front:
Bottom:
Side:
Rear:
Back:
Front:
Foam –
Front:
Rear:
Rear Top:
Rear Side pulley reduction:
Top Front – plastic diff holder:
Top rear:
Side:
Tools:
Tools 2:
Pack:
Pack & motor (Personally, I’d sell them both for a slower/better motor or a new pack, but they are both dependable):
Also included are 3 Corally Pit towels,
Thanks for looking,
Casey “The Bear” Rettke
Always feel free to pm with questions
In short, both cars still have plastic toe blocks and the foam car has plastic diff carrier. Other than that, they are both completely hopped up with ceramic balls, aluminum knuckles, uprights, carriers, hubs. The foam car was $ at Vegas, I really wouldn’t change a thing. The rubber setup is pretty awesome especially on asphalt right now, but isn’t too shabby on carpet either.
Over view of the whole package: Not mentioned later on are the 2 full sets of black springs, full set of silver springs, AE shock oil (20,25,30,35, 60 & 70), 2 sets of rubber tires (blues), 1 set of foam tires (magenta), spare battery strap and roughly eight blades, 12 hinge pins, 3 hex pins, and tamiya arms if you are feeling frisky. Setup board also comes with. I could be missing something, but if it's laid out in the pic's and not listed, it's included.
Left side:
Middle:
Right side:
Close up of spare shocks (built without oil in) ball cups, toe block inserts (2 bags worth), new bag of toe blocks, 2 new rear belts (1nip), new 4 degree castor blocks, new shock shaft bottoms:
Close up of 2 rows worth of toe blocks, original pulleys, 100t spur gear, 3 35 arms, 2 replacement outdrives for 1way, 2 one ways, a set of thin and thick toe block shims, an extra shock tower to be used for bulking up the tower only, old and new diff wrenches, new diff rings, diff grease, body hold downs, specialized raised ball studs, new front king pins, medium sway bar, servo saver, washers:
Close up to show stock steering, diff holders, c hubs, rear uprights, tamale shock tower braces, 6 degree aluminum c hubs, aluminum rear diff holder (back), new diff outdrives, enough stock balls to do 3 diffs, 2 thin wheel hexes:
Hub bearings, sway bar, shims, screw hardware, layshaft c spacers, brass bushings for alum. Knuckles:
More pics for your perusal,
Rubber Tire –
From the front:
Bottom:
Side:
Rear:
Back:
Front:
Foam –
Front:
Rear:
Rear Top:
Rear Side pulley reduction:
Top Front – plastic diff holder:
Top rear:
Side:
Tools:
Tools 2:
Pack:
Pack & motor (Personally, I’d sell them both for a slower/better motor or a new pack, but they are both dependable):
Also included are 3 Corally Pit towels,
Thanks for looking,
Casey “The Bear” Rettke
Always feel free to pm with questions
10-05-2009, 06:22 PM
#13
phi
hi
how much for the lot
make me a good offer and i am your man
thanks
arthur
how much for the lot
make me a good offer and i am your man
thanks
arthur
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
