FS: XXXcr, Exotek Losi MLST, RC18R, Losi Crawler, Electric Jammin X1, Sportwerks, ETC
#1
FS: XXXcr, Exotek Losi MLST, RC18R, Losi Crawler, Electric Jammin X1, Sportwerks, ETC
Team Losi XXXcr: Great car, mostly stock but has a really nice setup for a tight indoor track. Brand new rebuilt diff and shocks have about 2 weekends on the oil and seals. Comes with tons of tires. Mostly new sets, a couple used ones. New custom painted body with 2 weekends. I will include the extras parts I have for it. Mostly arms and bulkheads. Maybe a T-Plate I think. $130 as a roller only or $250 with a Novak XBR brushless controller, 10.5 Novak Velociti Motor, and a Futaba Digital/Metal gear servo.
Neu 1.5Y Smooth Can 1850Kv: - Ran this motor in my 8ight E and loved the power, but I already had too many motors. Ran it for a couple months, sent it to NEU for service and they added the new upgraded grommets where the wires exit the can. Everything is in great working order according to them. Awesome motor for E-Revo, E-Maxx, or other E conversions. $120 Shipped
Jammin X1CR Brushless Roller: My first Brushless buggy. Has the RC Monster conversion on it right now. Plastic spur. Threaded shocks, metal chassis braces. Front tower is slightly bent, but can easily be bent back or just replaced. I also have an RCPD Ultimate tray for the car that has never been installed. That costs $150 alone normally! I will sell the whole lot for $150 Shipped.
Sportwerks Turmoil ARR: Has brand new Sprotwerks .26 V2 in it. Broken in and run for one race night. Hasn't been run in about a year. Has the pro's milled out shock towers. Jammin shocks on the front. Great basher. Has two stock servos for steering and throttle/brake. Decent set of tires that I will throw in. $150 Shipped.
Exotek Team Losi Mini LST: This is the BEST off-road handling 1/18th scale I have ever driven. Full Exotek carbon/billet chassis allowing you to run full size servos. Exotek Wing mount, MIP front and rear diffs, Center spool. Brand new Custom Painted body by Celph Designs with one run on it. Tekin Mini Rage brushless system with 5400kv motor and 8000kv motor (in car). Standard servo. Tires have one run on them. Rear diff could use a rebuild (MIP has rebuild kits for $15) and the wing has a crack. Awesome car! Bind your Spektrum radio and drive! Comes with 2 2s Li-po packs and a few extras. Sold to 808TXT1!
Team Losi Mini Rock Crawler with DMG Nat Chassis: DMG Chassis with semi stock suspension setup. Losi mini late model threaded shocks. Frenzy 370 motor for more wheel speed. Eritex 1.9 comp heavy beadlocks with internal wheel weights. Front CVD's. Lipo on rear axle and full size Hitec MG servo on front axle. Proline 1.9 Flatirons with 2 runs on them. Some extras including a partially complete 4 link setup and another partially complete slingshot chassis kit. SOLD!
RC18R Nightline Car is setup very nicely. Foams still have some life left in them. Built if about a year ago when we had a pretty big RC18r class at my local track. Ran in a hand full of times. Roller only. $50 Shipped.
That is everything! Email me at [email protected] or PM me here.
Thanks - Andrew!
Neu 1.5Y Smooth Can 1850Kv: - Ran this motor in my 8ight E and loved the power, but I already had too many motors. Ran it for a couple months, sent it to NEU for service and they added the new upgraded grommets where the wires exit the can. Everything is in great working order according to them. Awesome motor for E-Revo, E-Maxx, or other E conversions. $120 Shipped
Jammin X1CR Brushless Roller: My first Brushless buggy. Has the RC Monster conversion on it right now. Plastic spur. Threaded shocks, metal chassis braces. Front tower is slightly bent, but can easily be bent back or just replaced. I also have an RCPD Ultimate tray for the car that has never been installed. That costs $150 alone normally! I will sell the whole lot for $150 Shipped.
Sportwerks Turmoil ARR: Has brand new Sprotwerks .26 V2 in it. Broken in and run for one race night. Hasn't been run in about a year. Has the pro's milled out shock towers. Jammin shocks on the front. Great basher. Has two stock servos for steering and throttle/brake. Decent set of tires that I will throw in. $150 Shipped.
Exotek Team Losi Mini LST: This is the BEST off-road handling 1/18th scale I have ever driven. Full Exotek carbon/billet chassis allowing you to run full size servos. Exotek Wing mount, MIP front and rear diffs, Center spool. Brand new Custom Painted body by Celph Designs with one run on it. Tekin Mini Rage brushless system with 5400kv motor and 8000kv motor (in car). Standard servo. Tires have one run on them. Rear diff could use a rebuild (MIP has rebuild kits for $15) and the wing has a crack. Awesome car! Bind your Spektrum radio and drive! Comes with 2 2s Li-po packs and a few extras. Sold to 808TXT1!
Team Losi Mini Rock Crawler with DMG Nat Chassis: DMG Chassis with semi stock suspension setup. Losi mini late model threaded shocks. Frenzy 370 motor for more wheel speed. Eritex 1.9 comp heavy beadlocks with internal wheel weights. Front CVD's. Lipo on rear axle and full size Hitec MG servo on front axle. Proline 1.9 Flatirons with 2 runs on them. Some extras including a partially complete 4 link setup and another partially complete slingshot chassis kit. SOLD!
RC18R Nightline Car is setup very nicely. Foams still have some life left in them. Built if about a year ago when we had a pretty big RC18r class at my local track. Ran in a hand full of times. Roller only. $50 Shipped.
That is everything! Email me at [email protected] or PM me here.
Thanks - Andrew!
Last edited by Racerx336; 07-06-2009 at 10:17 PM.
#4
125$ for the Jammin X1CR Brushless Roller shipped to canada?
#5
ygpm
#7
YGPM!!!!!
thanks
thanks
#12
Paypal sent for the MINI LST..
Thanks bro!!!!
Thanks bro!!!!