XRAY EVO and C-hub Part Lot
10-19-2003, 08:26 AM
#1
Tech Elite
Thread Starter
XRAY EVO and C-hub Part Lot
This is a Xray EVO2 with T1R chassis (Graphite Chassis was used outdoors and so I replaced it with the T1R Chassis and The Rear Shock Tower from the T1R). Car has all High Speed Bearings in the Car but has Ceramic Bearings in the Rear Diff Holders. All Diffs have Carbide Balls in the Diff. The Car spins Free and all Bearings and Parts were replaced for Indoor Carpet Racing where this has only been run since September. $325
- Rolling Chassis without the Pivot Ball Suspension All C-Hub
- 6 Degree Castor Blocks Medium
- 3 Degree Caster Blocks Soft Extra
- 3 Degree Castor Blocks Medium Extra
- T1R Front Sway Bar
- Rear sway Bar Extra
- Extra Lower Bumper
- 1.77 Low Ratio Pulley Set
- Regular Pulley Set
- Regular Front Shock tower
- Carpet Front Shock Tower
- All Springs for the Shocks (yellow, White, Blue, Violet, Purple, red). These are the original Prototype Springs that a Friend made for X-Ray. They are more pricise then the ones that are made now and are the true weight values where the ones now vary slightly.
- 128 Spur, 125 Spur
- Extra pair of Front Arms
- XRay side and Flat Weights
- Extra Screws
- Aluminum Roll Center Bridge
- Extra Outfdrives for Diff
- Spring Steel Front Drive
- Extra Spring Steel Drive Bone
- 11 Extra High Speed Bearings
- 2 Extra Ceramic Bearings
- 5 Steel Bearings used for Outdoors.
- 2 Extra Aluninum Outdrives for Axles
- Front Left and Right Bulkheads
- Prototype 3 Degree Castor Blocks (These are more bulky then the production ones)
Xray Parts LOT $150
These are all new in Package Enough Stuff to keep your X-Ray going without worrying about where to get parts
4- XRA302151 - Front Suspension Arms Medium for C-Hub
2- XRA302260 - Left C-Hub Steering Blocks
2- XRA303150 - Medium Rear Suspension Arms
2- XRA303153 - Hard Rear Suspension Arms
2- XRA302286 - Medium 6 Degree Castor Block Right
2- XRA302288 - Medium 6 Degree Castor Block Left
1- XRA307212 - Front Wishbone Long Pin Bottom for AntiRoll Bar
2- XRA305230 - Drive Shaft Coupling
4- XRA303350 - Rear Unpright for C-Hub
1- XRA302250 - Right C-Hub Steering Block
1- XRA302290 - C-Hub Bushings for Steering
1- XRA309054 - High Speed Ball bearings 10x15x4
1- XRA305240 - Drive Shaft Blades
1- XRA305320 - Drive Shaft Rear
1- XRA305431 - High Performance Kevlar Drive Belt Front
1- XRA301320 - Front Body Mount
1- XRA301330 - Rear Body Mount
1- XRA309345 - Hex Screws M3x10
1- XRA302040 - Lower Suspension Holder
1- XRA305150 - Timing Belt Pulley 34T
1- XRA303422 - Anti Roll bar Rear 1.5mm
1- XRA307310 - Rear Wishbone Pivot Pin Bottom
I will sell the whole package for $450. I accept Paypal.
e-mail me at [email protected] with questions. Not interested in Trades and really do not want to split up the parts lot.
- Rolling Chassis without the Pivot Ball Suspension All C-Hub
- 6 Degree Castor Blocks Medium
- 3 Degree Caster Blocks Soft Extra
- 3 Degree Castor Blocks Medium Extra
- T1R Front Sway Bar
- Rear sway Bar Extra
- Extra Lower Bumper
- 1.77 Low Ratio Pulley Set
- Regular Pulley Set
- Regular Front Shock tower
- Carpet Front Shock Tower
- All Springs for the Shocks (yellow, White, Blue, Violet, Purple, red). These are the original Prototype Springs that a Friend made for X-Ray. They are more pricise then the ones that are made now and are the true weight values where the ones now vary slightly.
- 128 Spur, 125 Spur
- Extra pair of Front Arms
- XRay side and Flat Weights
- Extra Screws
- Aluminum Roll Center Bridge
- Extra Outfdrives for Diff
- Spring Steel Front Drive
- Extra Spring Steel Drive Bone
- 11 Extra High Speed Bearings
- 2 Extra Ceramic Bearings
- 5 Steel Bearings used for Outdoors.
- 2 Extra Aluninum Outdrives for Axles
- Front Left and Right Bulkheads
- Prototype 3 Degree Castor Blocks (These are more bulky then the production ones)
Xray Parts LOT $150
These are all new in Package Enough Stuff to keep your X-Ray going without worrying about where to get parts
4- XRA302151 - Front Suspension Arms Medium for C-Hub
2- XRA302260 - Left C-Hub Steering Blocks
2- XRA303150 - Medium Rear Suspension Arms
2- XRA303153 - Hard Rear Suspension Arms
2- XRA302286 - Medium 6 Degree Castor Block Right
2- XRA302288 - Medium 6 Degree Castor Block Left
1- XRA307212 - Front Wishbone Long Pin Bottom for AntiRoll Bar
2- XRA305230 - Drive Shaft Coupling
4- XRA303350 - Rear Unpright for C-Hub
1- XRA302250 - Right C-Hub Steering Block
1- XRA302290 - C-Hub Bushings for Steering
1- XRA309054 - High Speed Ball bearings 10x15x4
1- XRA305240 - Drive Shaft Blades
1- XRA305320 - Drive Shaft Rear
1- XRA305431 - High Performance Kevlar Drive Belt Front
1- XRA301320 - Front Body Mount
1- XRA301330 - Rear Body Mount
1- XRA309345 - Hex Screws M3x10
1- XRA302040 - Lower Suspension Holder
1- XRA305150 - Timing Belt Pulley 34T
1- XRA303422 - Anti Roll bar Rear 1.5mm
1- XRA307310 - Rear Wishbone Pivot Pin Bottom
I will sell the whole package for $450. I accept Paypal.
e-mail me at [email protected] with questions. Not interested in Trades and really do not want to split up the parts lot.
Last edited by mike_Webb; 10-19-2003 at 12:12 PM.
10-19-2003, 08:27 AM
#2
Tech Elite
Thread Starter
Front
10-19-2003, 08:28 AM
#3
Tech Elite
Thread Starter
Rear
10-19-2003, 08:28 AM
#4
Tech Elite
Thread Starter
Parts #1
10-19-2003, 08:29 AM
#5
Tech Elite
Thread Starter
Parts #2
10-19-2003, 08:29 AM
#6
Tech Elite
Thread Starter
Springs
10-19-2003, 08:33 AM
#7
Tech Elite
Thread Starter
Parts Lot
10-19-2003, 03:58 PM
#8
Tech Elite
Thread Starter
Deal Pending
10-19-2003, 04:19 PM
#9
Tech Elite
Thread Starter
SOLD.. Thanks
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
