FTrc18 truggy. alum suspension. hs-82mg hardly used!
#1
FTrc18 truggy. alum suspension. hs-82mg hardly used!
ROLLER: $115 shipped WITH the batteries and extra parts
ill ship via USPS priority with tracking. insurance is extra... i take paypal only (unless local pickup). i dont ship out of the US.. GIVE ME AN OFFER! IM NOT TOTALLY FIRM ON PRICE!
this car was originally a factory rc18b, but was then converted into a truggy.
the car has:
-factory team aluminum arms, knuckles, and chubs
-gpm rear block
-a slightly used bottom deck
-DP draglink
-hitec hs-82mg servo attached to the chassis with very sticky servo tape.
- i used a spacer and nut to be able to use the DP draglink with the servo horn that came with the servo. it is a bit jimmy rigged/ghetto b/c of the hot glue to fill the gap but it works very well!
-front rc18t shocktowers
-rear rc18b shocktower
-freshly rebuilt diffs
-shocks rebuilt
-rpm front bumper
-DP 1/10th scale wheel adapters (white)
-3racing plastic wing
-factory team aluminum diff sleeves
-deans plugs
-factory team blue CF batt. strap
-hotbodies cyclone S slicks and dish wheels
-ib1400 NIMH pack (peaks around 1000-1200. peak can be improved with a few cyclones and possibly equalized a couple of times)
-1600mah 7.4v 2s (20c? i dont remember) LIPO works very well. this pack has been used about 5-8 times.
-stock esc (broken case...but esc worked the last time i used it)
-trinity mini monster (broken solder tab..needs a rebuild!)
-rc18t rear shocktower (with wing mod)
-front rc18b shocktower
-55t spur gear
-3racing heatsink
-misc steering components and aluminum steering hopups
ill ship via USPS priority with tracking. insurance is extra... i take paypal only (unless local pickup). i dont ship out of the US.. GIVE ME AN OFFER! IM NOT TOTALLY FIRM ON PRICE!
this car was originally a factory rc18b, but was then converted into a truggy.
the car has:
-factory team aluminum arms, knuckles, and chubs
-gpm rear block
-a slightly used bottom deck
-DP draglink
-hitec hs-82mg servo attached to the chassis with very sticky servo tape.
- i used a spacer and nut to be able to use the DP draglink with the servo horn that came with the servo. it is a bit jimmy rigged/ghetto b/c of the hot glue to fill the gap but it works very well!
-front rc18t shocktowers
-rear rc18b shocktower
-freshly rebuilt diffs
-shocks rebuilt
-rpm front bumper
-DP 1/10th scale wheel adapters (white)
-3racing plastic wing
-factory team aluminum diff sleeves
-deans plugs
-factory team blue CF batt. strap
-hotbodies cyclone S slicks and dish wheels
-ib1400 NIMH pack (peaks around 1000-1200. peak can be improved with a few cyclones and possibly equalized a couple of times)
-1600mah 7.4v 2s (20c? i dont remember) LIPO works very well. this pack has been used about 5-8 times.
-stock esc (broken case...but esc worked the last time i used it)
-trinity mini monster (broken solder tab..needs a rebuild!)
-rc18t rear shocktower (with wing mod)
-front rc18b shocktower
-55t spur gear
-3racing heatsink
-misc steering components and aluminum steering hopups