Losi 8T full race ARR f/s
08-19-2008, 06:34 PM
#1
Losi 8T full race ARR f/s
I have a Losi 8T race roller than I am looking to sell. I am getting out of gas racing. Below will be listed all the hop-ups, etc that come with it. If you have any questions or want pictures please email me and let me know and I'll be happy to get back to you.
-Losi 8T Race Roller with all of the following installed:
Carbon fiber servo tray support
Losi aluminum chassis braces (F&R)
Losi aluminum steering horn
Losi aluminum steering servo saver top
Losi aluminum rear diff bearing supports
Losi aluminum center diff bearing support
Losi aluminum front spindles
Losi aluminum front steering hubs
Losi aluminum clutch shoes
Also with the car with come most of the gear you need to run it including:
O.S. .28xz truggy race engine
Jammin JP3 Hard Anodized pipe
J.R. DS8711 High Torque Digital Servo 403oz torque/.15 transit time
2, SMC 1400mah receiver batteries
Traxxas receiver battery charger
Ofna Truggy starter box (blue one with two 750 motors)with 12v and charger
Hot Shot 5000mah glow ignitor
Dynamite glow plug wrench
Losi fuel bottle
Diff Oils 2,3,5,7,10 weights
Spare O.S. turbo glow plug
XTT tires with about 75% tread left on them
The original clutch which is new an unused
All spare parts including springs, swaybars, and all original plastic parts which were replaced with aluminum.
The only thing you need is a receiver and another servo. I can even throw in a Futaba R603FF 2.4ghz receiver for an additional $75 if you are interested.
Over 1,200 dollars invested without counting the aluminum hop-up parts.
I would like to get $900 for everything with free UPS shipping, which should save you about $40 bucks cause all this stuff is heavy. If you are interested please post here or email me at [email protected] I am not interested in any trades. Thanks. -Matt
-Losi 8T Race Roller with all of the following installed:
Carbon fiber servo tray support
Losi aluminum chassis braces (F&R)
Losi aluminum steering horn
Losi aluminum steering servo saver top
Losi aluminum rear diff bearing supports
Losi aluminum center diff bearing support
Losi aluminum front spindles
Losi aluminum front steering hubs
Losi aluminum clutch shoes
Also with the car with come most of the gear you need to run it including:
O.S. .28xz truggy race engine
Jammin JP3 Hard Anodized pipe
J.R. DS8711 High Torque Digital Servo 403oz torque/.15 transit time
2, SMC 1400mah receiver batteries
Traxxas receiver battery charger
Ofna Truggy starter box (blue one with two 750 motors)with 12v and charger
Hot Shot 5000mah glow ignitor
Dynamite glow plug wrench
Losi fuel bottle
Diff Oils 2,3,5,7,10 weights
Spare O.S. turbo glow plug
XTT tires with about 75% tread left on them
The original clutch which is new an unused
All spare parts including springs, swaybars, and all original plastic parts which were replaced with aluminum.
The only thing you need is a receiver and another servo. I can even throw in a Futaba R603FF 2.4ghz receiver for an additional $75 if you are interested.
Over 1,200 dollars invested without counting the aluminum hop-up parts.
I would like to get $900 for everything with free UPS shipping, which should save you about $40 bucks cause all this stuff is heavy. If you are interested please post here or email me at [email protected] I am not interested in any trades. Thanks. -Matt
08-20-2008, 01:06 PM
#2
Price is negotiable, make some offers.
08-20-2008, 05:37 PM
#3
ttt
08-20-2008, 11:12 PM
#4
If you are willing to part the OS 28, please let me know. Very interested.
thanks
thanks
08-21-2008, 05:24 PM
#5
going to try to sell it as a whole for a little bit but if I break it up I will let you know
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
