Go Back  R/C Tech Forums > For Sale/Trade Forums > R/C Items: For Sale/Trade
2xTruggys - OFNA Hyper ST Pro RTR and Kyosho Inferno ST - BNE.AUST >

2xTruggys - OFNA Hyper ST Pro RTR and Kyosho Inferno ST - BNE.AUST

2xTruggys - OFNA Hyper ST Pro RTR and Kyosho Inferno ST - BNE.AUST

Old 07-07-2008, 06:57 AM
Tech Apprentice
Thread Starter
iTrader: (4)
cdis's Avatar
Join Date: Apr 2008
Location: Brisbane, Australia
Posts: 58
Trader Rating: 4 (100%+)
Default 2xTruggys - OFNA Hyper ST Pro RTR and Kyosho Inferno ST - BNE.AUST

I'm in Brisbane, Australia. No International shipping, prices in AU$.

Missus is on my back to get rid of some of my stuff due to recent unexpected financial pressures . Need both of these gone ASAP.

I'm not really sure what to ask price wise, so please feel free to pm me with offers, worst I can say is no.

Postage will be at buyers expense, unless you live in Brisbane, in which case I can probably drop it off if you're in the city. I have both original boxes, so packing up and shipping won't be a problem.

First up is my faithful Kyosho Inferno ST US Sports. I haven't used the poor thing in about 6 months. I've upgraded it a bit as I was going to race it, but then decided to get the Hyper ST (also for sale, look below)

Under the hood
2nd Body and stock chassis
-All the tools that came with it
-Original manuals for both car, engine and radio
-2 bodies.
-Spare wing
-Stock chassis, spare front/rear body posts, torque rods, dogbones and center drive shafts
-glow plug lighter
-Shock socks on all the shocks
-stock TX/RX - I ran Spektrum from day 1, so I've never driven with these, only turned on to make sure they were working before sale

Upgraded stuff:
-upgraded all 3 diffs with extra spider gears to be the same as the diff's in the ST-R
-Added ST-R sway bars
-Added ST-R antenna mount
-upgraded chassis to Dragon Racing lightened chassis
-Upgraded torque rods to the ones from the ST-R
-Pretty sure its got an upgraded 3 shoe ST-R clutch

Other bits:
-Original box, if you want it

Engine has a brand new crankshaft in it, and everything was working when I last tested it, about a month ago.
Asking $350 for the Inferno

Up next is my near new Hyper ST Pro RTR. I bought it in April to race, and its quite a race bred beast. The stock motor was broken in properly and used for about 1.5L before I got a new engine. As RTR engines go tho, the stock one wasn't bad. The tires were used for 1 race day so they pretty much have their tread intact.

As this was the Pro kit, there weren't any upgrades to buy. I did however buy some spare stuff off ebay for it which are listed below, along with the other stuff it comes with.

Diffs are filled F:5000, C:7000, R:3000, shocks have whatever was in them when I bought the car.

Sale includes the stock radio gear, TX/RX and servos. A word on the servos; during the first hour or so of break in, I noticed that the stock servos were quite dodgey, the steering one was twiching all over the place. I replaced them with some other cheap MG995 Towerpro servos which I got off ebay which worked much better than the stock ones, but have since died. For the sale, the stock servos have been replaced, but I'd advise upgrding them as soon as possible.

Pull start broke on the 2nd tank, so I changed the fly wheel to the larger one so I could use a bump starter, and removed the pull start. Have been using a bump starter since then. The original flywheel is included, so if you don't have a starter box, you will need a new pull start.

Hyper ST + Remote and shell
Other Side
Stock Shell

-Brand new UNUSED shell as I bought a clear shell to paint with the car
-Tools that came with car. I never got the 17mm hex/glow plug wrench with the kit, so I added a glow plug wrench I had lying around. You will need a 17mm hex wrench.
-Stock radio - tested and working pre-sale, but I ran spektrum from when I bought it, so the radio has never been used apart from turned on to see if it works.
-Complete spare screw kit including plastic body posts and sway bars
-Complete brake kit with pads (cost me $50)
-Rubber tool thing to plug holes in center spider diff when filling
-original flywheel and what's left of the pull start
-3pack of DE Racing plastic rear chassis protectors (1 installed on car)
-spare #6 glowie

This great car cost me just under $900 3 months ago without the extra shell and other bits that I'm selling with it.
Asking $530 for it now, with all the extra stuff. This is a great deal, ask anyone who's driven a Hyper ST Pro.
cdis is offline  
Old 07-07-2008, 04:13 PM
Tech Apprentice
Thread Starter
iTrader: (4)
cdis's Avatar
Join Date: Apr 2008
Location: Brisbane, Australia
Posts: 58
Trader Rating: 4 (100%+)

cdis is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.