kvrc

iTrader: (10)

I have for sale two different size voltage capacitors. both sizes are panasonic FM series low esr 105 c rated. both measure .635" dia. x 1.0 long". the wire leads are .950" neg and 1.23" pos. in length.

these are NEW and NOT leftover old stock

For regular 1/10 systems that reccomend a cap i offer a 10 volt with 5600 uf rating. it will work with 2s lipos or up to 7 cell nickel packs. NOTE novak recomends a special cap for their gtb brushless systems so i cant reccomend this cap for that application.

For HV systems i offer a 25 volt with 2700 uf rating. it will work with up to a 5s lipo or about 16 nickel cells.
this cap has the same voltage and uf specs as the novak HV cap but is the FM series instead of the FC series and has better ripple current and impedance numbers.

Pricing is 1.75 for the regular and 2.30 per cap for the hv..

shipping is 1.50 for ANY size order anywhere in the 50 states.

for orders outside the US just contact me with what you want and i will get you a shipped price.

i accept paypal or money orders.

email me at [email protected] with any orders or questions you may have.

kvrc

iTrader: (10)

I still have a few of each left.

kvrc

iTrader: (10)

I still have a few of each left.

kvrc

iTrader: (10)

new lower price on the regular caps only 1.75 ea. everything else the same.

kvrc

iTrader: (10)

bump....

XXWoodmanXX

iTrader: (120)

Could you please tell us what the +/- % is on these? That's the most important part of the cap. and would like to know what quality these caps are. Thanks.

kvrc

iTrader: (10)

these are NEW stock panasonic fm series caps. the tolerance is listed at + - 20%. they have better ripple current numbers than the panasonic fc series caps used by some esc makers.

kvrc

iTrader: (10)

BUMP......