duratrax ice charger ( used 2 times) $105 shipped
04-13-2008, 03:26 PM
#1
duratrax ice charger ( used 2 times) $105 shipped
We used this as a back up charger and only used it 2 times. It is in perfect condition. IntelliPeak ICE meets the special charging needs of experienced electric car, truck and boat modelers, offering the ideal charge rates...the flexibility to handle multiple battery types...four charge modes (linear, reflex, impulse and "four-step")...plus uniquely easy operation and numerous programming options. It's a great value — and a must for serious drivers who demand the best!
Handles 1-10 NiCd or NiMH cells, and 1-4 lithium-ion (Li-Ion) or lithium-polymer (Li-Po) cells.
Displays graphs which show charge and discharge voltage curves.
Performs 1-10 cycles (NiCd and NiMH only) — retrieves data for 10 full cycles.
Program up to 10 batteries in memory by custom names for easy recall and charger set-up.
The large LCD screen shows 8 lines of data and 21 characters per line, and even charts charge and discharge voltage curves! More information can be viewed without scrolling - making menus easy to use and messages easy to read.
Its ability to break-in electric motors or operate commutator lathes is another IntelliPeak ICE feature that distinguishes it as the racer's choice among chargers.
With its advanced technology, uncomplicated menus, and simple pushbutton and dial operation, the ICE makes an enormous variety of functions very easy to use.
DTXP4170
Input Voltage: 11-15V DC
Battery Types, # of cells: 1-10 Nickel-Cadmium cells (1.2-12.0V NiCd)
1-10 Nickel-Metal Hydride cells (1.2-12.0V NiMH)
1-4 Lithium-lon or Lithium-Polymer cells (3.6-14.8V Li-lon/Li-Po)
Battery capacity range: 100-9900mAh
Fast charge current: 0.1-8.0A (1C max for Li-lon/Po)
Fast charge methods: linear, reflex, impulse and 4-step
Fast charge termination: Peak detection for NiCd and NiMH "constant current / constant voltage" for Li-lon / Li-Po optional thermal cutoff for all battery types
Peak sensitivity: 0-25mV adjustable
Trickle charge current: 0-500mA (n/a for Li-lon / Li-Po)
Discharge current: 0.1-10.0A adjustable
Dishcharge cut-off voltage: 0.1-1.1V per cell NiCd & NiMH 2.5-3.7V per cell Li-lon / Li-Po
Temperature cut-off range: 50-132°F (10-56°C)
Cycle count: one to ten cycles (n/a for Li-lon / Li-Po)
Cycle cooloff delay: 1-30 minutes adjustable
Battery memories: 10
Display type: 8 line, 21-character LCD (168 characters max)
Graphical displays: Graphs charge and discharge voltage curves
Output connectors: banana jacks (two adapter leads included)
Motor break-in: 1.0-8.0V selectable, 1-120 minutes, 10A constant
Case size: 5.5 x 1.8 x 5.9" (140 x 45 x 150 mm)
Weight: 21 oz. (605 g)
email us at [email protected]
105 shipped
Handles 1-10 NiCd or NiMH cells, and 1-4 lithium-ion (Li-Ion) or lithium-polymer (Li-Po) cells.
Displays graphs which show charge and discharge voltage curves.
Performs 1-10 cycles (NiCd and NiMH only) — retrieves data for 10 full cycles.
Program up to 10 batteries in memory by custom names for easy recall and charger set-up.
The large LCD screen shows 8 lines of data and 21 characters per line, and even charts charge and discharge voltage curves! More information can be viewed without scrolling - making menus easy to use and messages easy to read.
Its ability to break-in electric motors or operate commutator lathes is another IntelliPeak ICE feature that distinguishes it as the racer's choice among chargers.
With its advanced technology, uncomplicated menus, and simple pushbutton and dial operation, the ICE makes an enormous variety of functions very easy to use.
DTXP4170
Input Voltage: 11-15V DC
Battery Types, # of cells: 1-10 Nickel-Cadmium cells (1.2-12.0V NiCd)
1-10 Nickel-Metal Hydride cells (1.2-12.0V NiMH)
1-4 Lithium-lon or Lithium-Polymer cells (3.6-14.8V Li-lon/Li-Po)
Battery capacity range: 100-9900mAh
Fast charge current: 0.1-8.0A (1C max for Li-lon/Po)
Fast charge methods: linear, reflex, impulse and 4-step
Fast charge termination: Peak detection for NiCd and NiMH "constant current / constant voltage" for Li-lon / Li-Po optional thermal cutoff for all battery types
Peak sensitivity: 0-25mV adjustable
Trickle charge current: 0-500mA (n/a for Li-lon / Li-Po)
Discharge current: 0.1-10.0A adjustable
Dishcharge cut-off voltage: 0.1-1.1V per cell NiCd & NiMH 2.5-3.7V per cell Li-lon / Li-Po
Temperature cut-off range: 50-132°F (10-56°C)
Cycle count: one to ten cycles (n/a for Li-lon / Li-Po)
Cycle cooloff delay: 1-30 minutes adjustable
Battery memories: 10
Display type: 8 line, 21-character LCD (168 characters max)
Graphical displays: Graphs charge and discharge voltage curves
Output connectors: banana jacks (two adapter leads included)
Motor break-in: 1.0-8.0V selectable, 1-120 minutes, 10A constant
Case size: 5.5 x 1.8 x 5.9" (140 x 45 x 150 mm)
Weight: 21 oz. (605 g)
email us at [email protected]
105 shipped
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
