FS: Team TC4... tons of extras, almost RTR.
#1
FS: Team TC4... tons of extras, almost RTR.
Name: Ed
Location: Mohnton, PA 19540
Contact: [email protected]
Here's one hell of a deal and I have wayyyy more invested than what the asking price is! (ahhhh RC depreciation! )
The Car:
Team TC4 chassis
Novak GTX Speed controller
Novak XXL reciever (75 AM frequency)
Stock futaba servo (been in the car 2 years... still works great!)
CO27 motor installed (very little run time)
Alloy out drives
CS27 rubber tires
Front and back ball diffs
72 Spur gear
Alloy Team shock set
Much more really... pics say it all...
The Gear:
4 sets of matched Hefty cells (tons of life left in these, they're not A main packs, but they are perfect for the heats) Only 3 pictured, the other is a red IP pack.
Extra CO27 turn motors (all well taken care of see pics)
Extra brushes springs
Motor box (see pic)
One set of Titanium outdrives
Associated Spool
Extra servos (just in case)
Box of extra CS27 tires (prolly around 7 sets, some in decent shape)
Extra outdrives
Extra arms
Extras all over really (see pics!)
2 well used sedan bodies (cracked and ugly but still work fine)
1 new unpainted lexan prototype body (forgot the make)
Bunches of other stuff... too much to list.
I have spent a good amount on all this gear during my ongoing quest back into 10th scales. The GTX alone sells for around $70 used, I paid $120 for the rolling chassis of the car itself just around a year ago! The cells still work great, the one red pack pictured has a replacement cell in it cause one had a short in it, the other un-pictured pack is fine. This car runs really well, it has a bumpy onroad setup on it right now. This car was a loyal servant, got me into a lot of A-Mains. The chassis has scratches... but that's what happens when you race them!
It's a lot of gear for the price and is a great entry level point to start from. All you really need is a 75AM mhz transmitter and something that'll charge at 6 amps.
I'm asking $200 shipped for all of it! I easily have that invested between the motors and the batteries alone!
No trades please, and would like to get rid of it all in one shot.
Paypal only and USA buyers only please!
Also... have a Trinity Lathe for an Lathe now included in original price!, comes with extra carbide bits and a 4 cell pack to run it.
Location: Mohnton, PA 19540
Contact: [email protected]
Here's one hell of a deal and I have wayyyy more invested than what the asking price is! (ahhhh RC depreciation! )
The Car:
Team TC4 chassis
Novak GTX Speed controller
Novak XXL reciever (75 AM frequency)
Stock futaba servo (been in the car 2 years... still works great!)
CO27 motor installed (very little run time)
Alloy out drives
CS27 rubber tires
Front and back ball diffs
72 Spur gear
Alloy Team shock set
Much more really... pics say it all...
The Gear:
4 sets of matched Hefty cells (tons of life left in these, they're not A main packs, but they are perfect for the heats) Only 3 pictured, the other is a red IP pack.
Extra CO27 turn motors (all well taken care of see pics)
Extra brushes springs
Motor box (see pic)
One set of Titanium outdrives
Associated Spool
Extra servos (just in case)
Box of extra CS27 tires (prolly around 7 sets, some in decent shape)
Extra outdrives
Extra arms
Extras all over really (see pics!)
2 well used sedan bodies (cracked and ugly but still work fine)
1 new unpainted lexan prototype body (forgot the make)
Bunches of other stuff... too much to list.
I have spent a good amount on all this gear during my ongoing quest back into 10th scales. The GTX alone sells for around $70 used, I paid $120 for the rolling chassis of the car itself just around a year ago! The cells still work great, the one red pack pictured has a replacement cell in it cause one had a short in it, the other un-pictured pack is fine. This car runs really well, it has a bumpy onroad setup on it right now. This car was a loyal servant, got me into a lot of A-Mains. The chassis has scratches... but that's what happens when you race them!
It's a lot of gear for the price and is a great entry level point to start from. All you really need is a 75AM mhz transmitter and something that'll charge at 6 amps.
I'm asking $200 shipped for all of it! I easily have that invested between the motors and the batteries alone!
No trades please, and would like to get rid of it all in one shot.
Paypal only and USA buyers only please!
Also... have a Trinity Lathe for an Lathe now included in original price!, comes with extra carbide bits and a 4 cell pack to run it.
Last edited by imxlr8ed; 09-11-2007 at 07:54 PM. Reason: added lathe to deal