Hopped up and highly customized RC18 SPEED!
#1
Hopped up and highly customized RC18 SPEED!
I will sell the complete car as described below for $225 or as a roller (no motor, no esc) for $200 - both prices are shipped to lower 48.
This car was built for high speed drag racing and it MOVES! It has been driven 2-3 times. Over $600 invested in the car - Although I am not parting it out, the break down of my investment can be seen below.
Here are all the specs on this car:
Stock Parts: - $20-$30
Chassis, suspension arms, shock towers, diff cases and center drive shaft.
Aluminum: - $30
Front and rear wheel knuckles, front "bumper" and rear suspension arm pin mount, front and rear diff gears are aluminum (input gears are stock) E-flite motor heat sink.
RC Solutions roll cage - $50
Drivetrain:
MIP CVD's front and rear - $50
MIP Super diffs front and rear - $40
HR Titanium Spur Gear - $30
Shocks/Suspension:
MIP threades shock bodies - with 40wt shock oil. - $20
Lunsford titanium ball stud and tierods. - (not used for steering.) - $50
Steering: (zero play)
Dual HS-65MG servo's - $70
Dubro rod ends
Motor/ESC/Battery:
Dynamite C4 9200kv - $60
Quark 33A Pro ESC - $80
Custom built 4 cell Thunder Power 1320 mah Li-poly pack. - $75
Wheels/tires:
Parma 1/18 scale foam tires preglued on white wheels. Shore rating=30. - $20
Wheelie bar:
Custom made
Body:
Parma Custom Classic Truck - $15
Painted with Tamiya PS-6 "yellow" spray paint.
Does not include transmitter or receiver.
A video can be seen of this car running at just over 1/2 throttle at this link:
http://youtube.com/watch?v=NT5WSvYqLCg
Paypal only
PM me if interested.
Thanks.
Chris
This car was built for high speed drag racing and it MOVES! It has been driven 2-3 times. Over $600 invested in the car - Although I am not parting it out, the break down of my investment can be seen below.
Here are all the specs on this car:
Stock Parts: - $20-$30
Chassis, suspension arms, shock towers, diff cases and center drive shaft.
Aluminum: - $30
Front and rear wheel knuckles, front "bumper" and rear suspension arm pin mount, front and rear diff gears are aluminum (input gears are stock) E-flite motor heat sink.
RC Solutions roll cage - $50
Drivetrain:
MIP CVD's front and rear - $50
MIP Super diffs front and rear - $40
HR Titanium Spur Gear - $30
Shocks/Suspension:
MIP threades shock bodies - with 40wt shock oil. - $20
Lunsford titanium ball stud and tierods. - (not used for steering.) - $50
Steering: (zero play)
Dual HS-65MG servo's - $70
Dubro rod ends
Motor/ESC/Battery:
Dynamite C4 9200kv - $60
Quark 33A Pro ESC - $80
Custom built 4 cell Thunder Power 1320 mah Li-poly pack. - $75
Wheels/tires:
Parma 1/18 scale foam tires preglued on white wheels. Shore rating=30. - $20
Wheelie bar:
Custom made
Body:
Parma Custom Classic Truck - $15
Painted with Tamiya PS-6 "yellow" spray paint.
Does not include transmitter or receiver.
A video can be seen of this car running at just over 1/2 throttle at this link:
http://youtube.com/watch?v=NT5WSvYqLCg
Paypal only
PM me if interested.
Thanks.
Chris
Last edited by needrcspeed; 09-07-2007 at 12:09 PM.
#2
bump...
#3
ttt...
#4
going up...
#5
going up
#6
#7
#8
ttt
#9
ttt...bump
#10
Price has been reduced to $250
#11
still available for $250
#12
$250 for a one of a kind RC18 - smoke your friends, impress your friends, sell it to your friends...
#13
up...ttt
#14
ttt
#15
Someone could buy it just for the upgrades and come out ahead...