FS: Kyosho ZX-5 w/ hop-ups and lots of spare parts
#1
FS: Kyosho ZX-5 w/ hop-ups and lots of spare parts
For Sale: One slightly used Kyosho ZX-5 4WD electric buggy. Rolling chassis with no electronics or radio gear included. I bought this for a big local race in April, and didn’t end up running it. It has a total of four practice runs on it on an indoor clay track. There is no 4WD electric class at my track, so it’s not getting used. This buggy is in near new condition.
It has the following hop-ups installed on the car:
Aluminum front hinge pin brace: $30.00
Shooters blue aluminum shock tower mount: $30.00
Associated factory team blue titanium turnbuckles: $27.00
Team PRP carbon fiber steering plate (prototype)- $14.00
AE carbide diff balls (front and rear)- $25.00
Kyosho rear CVD drive shafts- $37.00
Losi spur gear and slipper pads- $7.00
Shooters Carbon fiber shock tower- $24.00
GPM rear alloy hub carriers- $15.00
RC Screws stainless steel hex screw kit- $18.00
Also included are the following spare parts NIP (new in package)
(1)5028W rear wheels white NIP- $8.00
(3) LA 217 Rear shock tower (2 are NIP)- $15.00
(2) LA 216 fron shock tower NIP- $10.00
(3) LA220 suspension arms F & R NIP $15.00
(2) LA210 Front bulkhead NIP $14.00
(2)LA209 rear bulkhead set NIP $14.00
(1)LA213 bumper and wing stay set NIP- $5.00
(2)LA 219-7 front knuckle and hub carriers NIP- $11.00
(1)W5106 plastic shock parts NIP- $4.00
(1)UM112 4.8mm ball cups NIP- $5.00
(1)W5015 shock ends NIP- $3.00
(1)LA230 hinge pins 44mm NIP- $4.50
(1)LA228 hinge pins 25 mm NIP- $4.50
(1)LA229 hinge pins 27mm NIP- $4.50
(1)W0201 5.8mm steel suspension balls NIP - $9.00
(1)UM128 4.8mm ball studes (L) NIP- $5.00
(1)LA235 4.8mm king pin ball NIP- $4.00
(1)92635 king pin NIP- $3.50
(1)96647 10x12mm shim set for transmission NIP-$4.00
Also included, but not NIP are the original rear dogbones (unused), original rear hub carriers (unused), original rear shock tower (unused), original turnbuckles (unused), original screws (not used), a set of front hub carriers and knuckles (minus one knuckle), miscellaneous spare parts, and the parts box shown in the photos. Car comes with a new set of front and rear rims, but no tires. The body is a spray paint job that looks OK, but it is not a pro job. Comese with original box and manual.
This is a complete race ready package with a ton of spare parts and hop ups. All purchased new, the kit ($329.00) plus the hop ups ($227.00) plus the spare parts ($130.00) would run around $670.00. I have around $700.00 total invested in this package. My loss is your gain. $325.00 plus shipping. Email me at [email protected] if interested.
It has the following hop-ups installed on the car:
Aluminum front hinge pin brace: $30.00
Shooters blue aluminum shock tower mount: $30.00
Associated factory team blue titanium turnbuckles: $27.00
Team PRP carbon fiber steering plate (prototype)- $14.00
AE carbide diff balls (front and rear)- $25.00
Kyosho rear CVD drive shafts- $37.00
Losi spur gear and slipper pads- $7.00
Shooters Carbon fiber shock tower- $24.00
GPM rear alloy hub carriers- $15.00
RC Screws stainless steel hex screw kit- $18.00
Also included are the following spare parts NIP (new in package)
(1)5028W rear wheels white NIP- $8.00
(3) LA 217 Rear shock tower (2 are NIP)- $15.00
(2) LA 216 fron shock tower NIP- $10.00
(3) LA220 suspension arms F & R NIP $15.00
(2) LA210 Front bulkhead NIP $14.00
(2)LA209 rear bulkhead set NIP $14.00
(1)LA213 bumper and wing stay set NIP- $5.00
(2)LA 219-7 front knuckle and hub carriers NIP- $11.00
(1)W5106 plastic shock parts NIP- $4.00
(1)UM112 4.8mm ball cups NIP- $5.00
(1)W5015 shock ends NIP- $3.00
(1)LA230 hinge pins 44mm NIP- $4.50
(1)LA228 hinge pins 25 mm NIP- $4.50
(1)LA229 hinge pins 27mm NIP- $4.50
(1)W0201 5.8mm steel suspension balls NIP - $9.00
(1)UM128 4.8mm ball studes (L) NIP- $5.00
(1)LA235 4.8mm king pin ball NIP- $4.00
(1)92635 king pin NIP- $3.50
(1)96647 10x12mm shim set for transmission NIP-$4.00
Also included, but not NIP are the original rear dogbones (unused), original rear hub carriers (unused), original rear shock tower (unused), original turnbuckles (unused), original screws (not used), a set of front hub carriers and knuckles (minus one knuckle), miscellaneous spare parts, and the parts box shown in the photos. Car comes with a new set of front and rear rims, but no tires. The body is a spray paint job that looks OK, but it is not a pro job. Comese with original box and manual.
This is a complete race ready package with a ton of spare parts and hop ups. All purchased new, the kit ($329.00) plus the hop ups ($227.00) plus the spare parts ($130.00) would run around $670.00. I have around $700.00 total invested in this package. My loss is your gain. $325.00 plus shipping. Email me at [email protected] if interested.
Last edited by mekong56; 08-07-2006 at 04:52 AM.
#2
bump