NEW* 2x Trinity Xfactor 13.5t Tuned/Upgraded Rotor Ron
sold
Ducatiman2020
02-09-2021 12:50 PM
Still available?
KeeneRc
02-09-2021 12:51 PM
yup
freebird
02-09-2021 02:47 PM
what were these tuned for? Intended use?
KeeneRc
02-09-2021 02:53 PM
Originally Posted by freebird
(Post 15751054)
what were these tuned for? Intended use?
just his standard use. Here is the details of the motorThis motor is professionally built and tuned to Rotor Ron’s strict parameters. What does that mean you ask? First, I upgrade the stock bearings to ceramic bearings lubed with SHAG Oil to allow the motor to spin more freely. I then add titanium screws to help eliminate unnecessary magnetic drag. Then I make sure the rotor properly shimmed, do a complete evaluation of stator poles, rotor strength & asymmetry and sensor board deviation. This motor has an aligned sensor board that is within my personal strict standards. Bottom line, you will get an awesome motor!
Includes Rotor Ron Dyno Service and instructions that will get you up to speed, fast! (A $34.99 Value!) No need to ever touch the timing again! Motor specs and dyno sheet included along with stickers for your vehicle.
The X-Factor spec class brushless motor has a revolutionary timing ring and a locking end plate systems. There are no long stator screws so in turn it makes it lighter. X-Flow Cooling which pulls more air through the can, reducing motor temperatures. Also made with CNC Machined Aluminum to allow for more accurate alignment.
Features:
10% Lighter than Previous Motors
Weight (144g avg)
New Composite Sensor Board
Revolutionary timing ring & locking end plate systems saves weight Only 6 short screws (no long screws)
X-Flow Cooling which pulls more air through the can, reducing motor temps
2pc CNC Machined Aluminum can allows for more accurate deviation readings
2mm Ultra Low Resistance Solder Tabs
New Stator Design provides a more efficient power curve NO FADE!
It comes built with the torque and punch of the TEP1119
12.5 x 25.5mm Long
High Torque Copper Rotor
ROAR Approved.
Perfect for all classes that require a 13.5 turn motor.
posted from his site. I also adjusted the price down 10$ as well. His motors are normally used in off-road 10th scale wether it be carpet, clay , or dirt
KeeneRc
02-10-2021 09:21 AM
Bump!
Ducatiman2020
02-10-2021 09:31 AM
225 shipped for both?
KeeneRc
02-10-2021 09:37 AM
Originally Posted by Ducatiman2020
(Post 15751394)
