2LikesFS: Team Associated TC7.1 TC7.2 Hobbywing XR10 PRO Sanwa RX471 Fantom Icon Savox
12-09-2020, 06:10 AM
#1
FS: Team Associated TC7.1 TC7.2 Hobbywing XR10 PRO Sanwa RX471 Fantom Icon Savox
This car was run for 2 practice nights, 2 club nights and has been sitting since. All on carpet, in 25.5 class. Everything is in like new condition. The car looks and feels new and most parts have one race on them! I have taken a job that relocates me to an are with no local tracks. Because of this, I am finding my whole RC program a new home. Ideally I'd sell everything together as it would be a full turn-key solution for a racer looking to do TC and 1/12. You'd only need a battery for the TC and you'd be set for years. I had big dreams of racing for years, but my work has taken me to an area with no track. I just finished building this, dialing it in, accumulating all spares only to find out I wont be able to race. See the pictures. I'd prefer to sell complete, but will sell as a roller if no one takes the lot. In that case I'd be selling the roller bare and the spare parts would be individually sold. Can make this a package deal with an M12, Hitex X4 eighty charger and the RC12R6 in another post. Let me know. Have an album of all pictures, gett dm me your email and I can send it.
******$OLD to cartoydriver*****
The car has 20k diff oil in it now. I have completed the center Pitch Control system utilizing a spare Ti turnbuckle along with a new battery foam installed. Car is setup for black ozite, but can easily be changed to whatever track you have with the included parts. Enough tuning parts here for ANY situation! Everything works great and mechanically perfect. Some small scuffs and wear and sold as-is due to the nature of this hobby.
Highlights include:
FT TC7.1 Aluminum Chassis #31652
FT TC7.1 Graphite Chassis #31650
FT TC7.2 Aluminum Rear CVA bones #31796
FT Front and Rear Brass Outer Arm Mounts (7g) #31618
FT Front and Rear Brass Inner Arm Mounts (5g) #31662
FT Blue Ti Turnbuckle Set #31699
FT PSD Shock System #31751 (front + rear / 2 sets)
FT Belt Tensioner kit #31639
FT Carbon Bumper Brace #31649 (X2)
FT 7.2 Front Bumper TC7.2 #31797 (X2)
FT 7.2 Center Pitch Control System installed
FT 7.2 Adjustable Body Post Set #31799
FT Blue Aluminum Screws, Nuts, and Washers
FT Sway Bars and Spring Set
FT 7.1 Gear Diffs(X4) 3k, 7k, 10k and 12k labeled BRAND NEW, Just Built!
175RC Black Titanium Turnbuckle Set
RSD Carbon Battery Tie Down Kit
XRAY Spring Set (some duplicates)
XRAY Low Friction Belts, front and rear (X2, new, not installed)
Protek Black Clamping Aluminum Servo Horn, Lunsford titanium servo turnbuckle
Lunsford Titanium Screw Kit (every screw on top of chassis is Ti, all on the bottom of the chassis are steel!)
1up Racing Dynamic Toe Control Conversion (not installed)
CRC 51t Gold Pinion and 96t Kimborough Spur gear
Brass weights on chassis to corner balance to a MuchMore 6000mah
Electronics:
Savox SB-2261MG Servo (had used for 2 club races in my stock buggy prior to this and installed new gears and bearings before installing in the TC7.1 ($45 shipped)
Hobbywing XR10 Pro 80a ESC with extra triple pack capacitor (used 5 club races) - $85 shipped
Sanwa RX471 RX (used 5 club races) - $75 shipped
Novak Ballistic Boss VTA Motor 21.5t (installed) (used 10 club races) & Novak Ballistic Boss VTA Motor 25.5t (w/extra 25.5 stator) (looks new, only soldered in to test) - $50 shipped for both motors and extra stator
Fantom Icon Team Works Edition w/12.5mm HT ULTRA Select Rotor (used one practice day, otherwise new!) & R1 Motor fan - $65 shipped
EXTRAS:
A BOATLOAD of parts BNIP, lots have been discontinued and hard to find!
A bunch of spare parts new but out of package
3 Professionally Painted bodies and 1 BNIP body uncut
2 Sets of black ozite carpet spec tires
2 Sets of high traction asphalt spec tires
TackleBox full of hardware and AE spares
TackleBox full of various small parts, hinge pins, diff parts, tuning parts, etc.
MuchMore Tire Warmers
Arromax Lipo Safe
*Includes original box and manual.*
******$OLD to cartoydriver*****
The car has 20k diff oil in it now. I have completed the center Pitch Control system utilizing a spare Ti turnbuckle along with a new battery foam installed. Car is setup for black ozite, but can easily be changed to whatever track you have with the included parts. Enough tuning parts here for ANY situation! Everything works great and mechanically perfect. Some small scuffs and wear and sold as-is due to the nature of this hobby.
Highlights include:
FT TC7.1 Aluminum Chassis #31652
FT TC7.1 Graphite Chassis #31650
FT TC7.2 Aluminum Rear CVA bones #31796
FT Front and Rear Brass Outer Arm Mounts (7g) #31618
FT Front and Rear Brass Inner Arm Mounts (5g) #31662
FT Blue Ti Turnbuckle Set #31699
FT PSD Shock System #31751 (front + rear / 2 sets)
FT Belt Tensioner kit #31639
FT Carbon Bumper Brace #31649 (X2)
FT 7.2 Front Bumper TC7.2 #31797 (X2)
FT 7.2 Center Pitch Control System installed
FT 7.2 Adjustable Body Post Set #31799
FT Blue Aluminum Screws, Nuts, and Washers
FT Sway Bars and Spring Set
FT 7.1 Gear Diffs(X4) 3k, 7k, 10k and 12k labeled BRAND NEW, Just Built!
175RC Black Titanium Turnbuckle Set
RSD Carbon Battery Tie Down Kit
XRAY Spring Set (some duplicates)
XRAY Low Friction Belts, front and rear (X2, new, not installed)
Protek Black Clamping Aluminum Servo Horn, Lunsford titanium servo turnbuckle
Lunsford Titanium Screw Kit (every screw on top of chassis is Ti, all on the bottom of the chassis are steel!)
1up Racing Dynamic Toe Control Conversion (not installed)
CRC 51t Gold Pinion and 96t Kimborough Spur gear
Brass weights on chassis to corner balance to a MuchMore 6000mah
Electronics:
Savox SB-2261MG Servo (had used for 2 club races in my stock buggy prior to this and installed new gears and bearings before installing in the TC7.1 ($45 shipped)
Hobbywing XR10 Pro 80a ESC with extra triple pack capacitor (used 5 club races) - $85 shipped
Sanwa RX471 RX (used 5 club races) - $75 shipped
Novak Ballistic Boss VTA Motor 21.5t (installed) (used 10 club races) & Novak Ballistic Boss VTA Motor 25.5t (w/extra 25.5 stator) (looks new, only soldered in to test) - $50 shipped for both motors and extra stator
Fantom Icon Team Works Edition w/12.5mm HT ULTRA Select Rotor (used one practice day, otherwise new!) & R1 Motor fan - $65 shipped
EXTRAS:
A BOATLOAD of parts BNIP, lots have been discontinued and hard to find!
A bunch of spare parts new but out of package
3 Professionally Painted bodies and 1 BNIP body uncut
2 Sets of black ozite carpet spec tires
2 Sets of high traction asphalt spec tires
TackleBox full of hardware and AE spares
TackleBox full of various small parts, hinge pins, diff parts, tuning parts, etc.
MuchMore Tire Warmers
Arromax Lipo Safe
*Includes original box and manual.*
Last edited by maxwellduryea; 12-26-2020 at 05:55 AM.
12-09-2020, 06:46 AM
#2
This car was run for 2 practice nights, 2 club nights and has been sitting since. All on carpet, in 25.5 class. Everything is in like new condition. The car looks and feels new and most parts have one race on them! I have taken a job that relocates me to an are with no local tracks. Because of this, I am finding my whole RC program a new home. Ideally I'd sell everything together as it would be a full turn-key solution for a racer looking to do TC and 1/12. You'd only need a battery for the TC and you'd be set for years. I had big dreams of racing for years, but my work has taken me to an area with no track. I just finished building this, dialing it in, accumulating all spares only to find out I wont be able to race. See the pictures. I'd prefer to sell complete, but will sell as a roller if no one takes the lot. In that case I'd be selling the roller bare and the spare parts would be individually sold. Can make this a package deal with an M12, Hitex X4 eighty charger and the RC12R6 in another post. Let me know. Have an album of all pictures, jet dm me your email and I can send it.
The car has 20k diff oil in it now. I have completed the center Pitch Control system utilizing a spare Ti turnbuckle along with a new battery foam installed. Car is setup for black ozite, but can easily be changed to whatever track you have with the included parts. Enough tuning parts here for ANY situation! Everything works great and mechanically perfect. Some small scuffs and wear and sold as-is due to the nature of this hobby.
Highlights include:
FT TC7.1 Aluminum Chassis #31652
FT TC7.1 Graphite Chassis #31650
FT TC7.2 Aluminum Rear CVA bones #31796
FT Front and Rear Brass Outer Arm Mounts (7g) #31618
FT Front and Rear Brass Inner Arm Mounts (5g) #31662
FT Blue Ti Turnbuckle Set #31699
FT PSD Shock System #31751 (front + rear / 2 sets)
FT Belt Tensioner kit #31639
FT Carbon Bumper Brace #31649 (X2)
FT 7.2 Front Bumper TC7.2 #31797 (X2)
FT 7.2 Center Pitch Control System installed
FT 7.2 Adjustable Body Post Set #31799
FT Blue Aluminum Screws, Nuts, and Washers
FT Sway Bars and Spring Set
FT 7.1 Gear Diffs(X4) 3k, 7k, 10k and 12k labeled BRAND NEW, Just Built!
175RC Black Titanium Turnbuckle Set
RSD Carbon Battery Tie Down Kit
XRAY Spring Set (some duplicates)
XRAY Low Friction Belts, front and rear (X2, new, not installed)
Protek Black Clamping Aluminum Servo Horn, Lunsford titanium servo turnbuckle
Lunsford Titanium Screw Kit (every screw on top of chassis is Ti, all on the bottom of the chassis are steel!)
1up Racing Dynamic Toe Control Conversion (not installed)
CRC 51t Gold Pinion and 96t Kimborough Spur gear
Brass weights on chassis to corner balance to a MuchMore 6000mah
Electronics:
Savox SB-2261MG Servo (had used for 2 club races in my stock buggy prior to this and installed new gears and bearings before installing in the TC7.1
Hobbywing XR10 Pro 80a ESC with extra triple pack capacitor (used 5 club races)
Sanwa RX471 RX (used 5 club races)
Novak Ballistic Boss VTA Motor 21.5t (installed) (used 10 club races)
Novak Ballistic Boss VTA Motor 25.5t (w/extra 25.5 stator) (looks new, only soldered in to test)
Fantom Icon Team Works Edition w/12.5mm HT ULTRA Select Rotor (used one practice day, otherwise new!)
R1 Motor fan
EXTRAS:
A BOATLOAD of parts BNIP, lots have been discontinued and hard to find!
A bunch of spare parts new but out of package
3 Professionally Painted bodies and 1 BNIP body uncut
2 Sets of black ozite carpet spec tires
2 Sets of high traction asphalt spec tires
TackleBox full of hardware and AE spares
TackleBox full of various small parts, hinge pins, diff parts, tuning parts, etc.
MuchMore Tire Warmers
Arromax Lipo Safe
*Includes original box and manual.*
The car has 20k diff oil in it now. I have completed the center Pitch Control system utilizing a spare Ti turnbuckle along with a new battery foam installed. Car is setup for black ozite, but can easily be changed to whatever track you have with the included parts. Enough tuning parts here for ANY situation! Everything works great and mechanically perfect. Some small scuffs and wear and sold as-is due to the nature of this hobby.
Highlights include:
FT TC7.1 Aluminum Chassis #31652
FT TC7.1 Graphite Chassis #31650
FT TC7.2 Aluminum Rear CVA bones #31796
FT Front and Rear Brass Outer Arm Mounts (7g) #31618
FT Front and Rear Brass Inner Arm Mounts (5g) #31662
FT Blue Ti Turnbuckle Set #31699
FT PSD Shock System #31751 (front + rear / 2 sets)
FT Belt Tensioner kit #31639
FT Carbon Bumper Brace #31649 (X2)
FT 7.2 Front Bumper TC7.2 #31797 (X2)
FT 7.2 Center Pitch Control System installed
FT 7.2 Adjustable Body Post Set #31799
FT Blue Aluminum Screws, Nuts, and Washers
FT Sway Bars and Spring Set
FT 7.1 Gear Diffs(X4) 3k, 7k, 10k and 12k labeled BRAND NEW, Just Built!
175RC Black Titanium Turnbuckle Set
RSD Carbon Battery Tie Down Kit
XRAY Spring Set (some duplicates)
XRAY Low Friction Belts, front and rear (X2, new, not installed)
Protek Black Clamping Aluminum Servo Horn, Lunsford titanium servo turnbuckle
Lunsford Titanium Screw Kit (every screw on top of chassis is Ti, all on the bottom of the chassis are steel!)
1up Racing Dynamic Toe Control Conversion (not installed)
CRC 51t Gold Pinion and 96t Kimborough Spur gear
Brass weights on chassis to corner balance to a MuchMore 6000mah
Electronics:
Savox SB-2261MG Servo (had used for 2 club races in my stock buggy prior to this and installed new gears and bearings before installing in the TC7.1
Hobbywing XR10 Pro 80a ESC with extra triple pack capacitor (used 5 club races)
Sanwa RX471 RX (used 5 club races)
Novak Ballistic Boss VTA Motor 21.5t (installed) (used 10 club races)
Novak Ballistic Boss VTA Motor 25.5t (w/extra 25.5 stator) (looks new, only soldered in to test)
Fantom Icon Team Works Edition w/12.5mm HT ULTRA Select Rotor (used one practice day, otherwise new!)
R1 Motor fan
EXTRAS:
A BOATLOAD of parts BNIP, lots have been discontinued and hard to find!
A bunch of spare parts new but out of package
3 Professionally Painted bodies and 1 BNIP body uncut
2 Sets of black ozite carpet spec tires
2 Sets of high traction asphalt spec tires
TackleBox full of hardware and AE spares
TackleBox full of various small parts, hinge pins, diff parts, tuning parts, etc.
MuchMore Tire Warmers
Arromax Lipo Safe
*Includes original box and manual.*
12-10-2020, 10:21 AM
#3
All messages replied to. Bump to the top!
12-10-2020, 08:07 PM
#4
Tech Initiate
pm sent
12-11-2020, 07:57 AM
#5
Bump for the day! All pm's replied to!
12-11-2020, 06:41 PM
#8
Thank you shaveradam! I appreciate it. The car is truly a complete setup and in excellent shape.
Have posted the price up top and have an option without electronics.
Thanks everyone! Let's get this a new, loving home!
Have posted the price up top and have an option without electronics.
Thanks everyone! Let's get this a new, loving home!
12-16-2020, 03:14 PM
#9
This beautiful car needs a new home. Happy to sell as just a roller or as you see in the pictures above or any variation in-between!
12-20-2020, 09:29 AM
#10
Up for $625 shipped for everything before I pull this apart and sell individually on eBay!
12-25-2020, 03:41 PM
#11
Tech Rookie
PM Sent
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
