Axail bomber Kit with Upgrades ARTR
08-04-2018, 05:52 PM
#1
Axail bomber Kit with Upgrades ARTR
Looking to sell my Axial bomber kit. Has several upgrades to the axles and transmission. This truck is a ton of fun, and the 4800kv motor is perfect when combined with the 2 speed transmission. Very smooth in low gear, so you can crawl, and good speeds in second gear. Still running the stock axles, and this weakest link to this truck. I personally like to have 1 weak spot in the drive train so if something does break, its an easy spot to fix. Also included a small box of extra parts to go along with this truck. I'm looking to get sold shipped for everything to your door.
Transmission:
Hot racing 2 speed transmission.
Stock plastic case modified. Stock shift shaft guide is plastic, I glued in a brass insert that is slightly longer and much stronger.
Axial aluminum Motor mount.
Stock plastic spur gear.
Axles:
Beeftube axle inserts, front is brass, rear is stainless
Incision Lockers
Incision Stainless steel links
Kit rear trailing arms
No name aluminum Lockouts, C hubs, and knuckles
Vanquish truss braces
SSD Shock mounts front and back
Electronics:
Tekin Rx8 Gen 1
Castle BEC @ 7.4 volts
Savox 1230 for steering
Savox 0220 for shifting
Trinity Revtech 4 pole 4800 kv sensored motor
RC4wd Winch - Not currently hooked up. I got a new radio that wont play nice with my homemade winch control.
Included tire sets:
Dick Cepek rims on modified stock tires. the Dick cepek rims had to be modified to fit the factory wheel hexes. this causes them to have a slight wobble but nothing is bent.
Ebay special, red rims with Rok Lox 2.2 tires
Factory plastic rims with 2oz in front and 1oz in rear with 2.2 swampers mounted. These were painted but the paint is flaking off.
Transmission:
Hot racing 2 speed transmission.
Stock plastic case modified. Stock shift shaft guide is plastic, I glued in a brass insert that is slightly longer and much stronger.
Axial aluminum Motor mount.
Stock plastic spur gear.
Axles:
Beeftube axle inserts, front is brass, rear is stainless
Incision Lockers
Incision Stainless steel links
Kit rear trailing arms
No name aluminum Lockouts, C hubs, and knuckles
Vanquish truss braces
SSD Shock mounts front and back
Electronics:
Tekin Rx8 Gen 1
Castle BEC @ 7.4 volts
Savox 1230 for steering
Savox 0220 for shifting
Trinity Revtech 4 pole 4800 kv sensored motor
RC4wd Winch - Not currently hooked up. I got a new radio that wont play nice with my homemade winch control.
Included tire sets:
Dick Cepek rims on modified stock tires. the Dick cepek rims had to be modified to fit the factory wheel hexes. this causes them to have a slight wobble but nothing is bent.
Ebay special, red rims with Rok Lox 2.2 tires
Factory plastic rims with 2oz in front and 1oz in rear with 2.2 swampers mounted. These were painted but the paint is flaking off.
Last edited by Darkgenerals; 08-08-2018 at 09:49 AM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
