RockStar_199

iTrader: (42)

RCS is the best I have used and have seen the candy if shot right have that chrome color looks as close as you can get.

LVBaja

Here are two for Steve Taylor. This is based off his normal paint scheme and colors, but with a "Rapopaint" touch.

LVBaja

This one is for Colby Walkoviac in Texas.

flap jack

iTrader: (6)

Great job Scott. I love them!!!!

Steve Taylor

Sk3tch

iTrader: (8)

WICKED creative...the trggy buggy set and that last buggy. Love your work man.

LVBaja

Thanks Sk3tch.

LVBaja

Here's one for my race buddy Paul Edwards in his signature scheme.

LVBaja

Here's a pit board to match the bodies I recently painted for George Berridge.

toughtrax

iTrader: (25)

Scott: what would I have to send you to do a pit board like the one above? or can you get the stuff by you?

LVBaja

The pit board was made of lexan and was approximately 1/4" thick. George gave it to me to paint, and he got it from another racer. Not sure where it originated from, but I will do some investigating to see if I can track down some more material. I will let you know what I find.

LVBaja

Turns out lexan is readily available. I ordered some from an outfit in Florida that sells their "scraps." I will paint a couple up with my scheme and my stepson's scheme and post when done.

LVBaja

Here are four for one of our local racers RJ Hart. He gave me some guidance on design and colors and let me take it from there.

LVBaja

This one if for a local racer. He asked that I copy a great paint job by Darkside Designs, so I cannot really take any credit for the design or colors. Nonetheless, I wanted to share because I think it turned out really nice.

LVBaja

This one is for a MONSTER ENERGY (and monster truck) fan from Sweden. Special thanks to Chris Moore of CMDesigns for the logo masks.

chris moore

iTrader: (96)

Sweet!