rcbarrmeister

Here's a 05 Dodge Charger, I'd appreciate a template for it if you don't mind.

http://www.snowbirdnationals.com/marble/Charger.JPG

scoobydo

iTrader: (1)

nsr250repsol
I'll get to work on one and post it as soon as I'm done.

rcbarrmeister
I'll get to work on it and get it up as soon as I finish.

scoobydo

iTrader: (1)

I found a really bad one on the AE Site.
It was the best I could find.
If you find me a better nice big picture, I can do a better job.
Here What I could do with it.

scoobydo

iTrader: (1)

Here is the Charger.

scoobydo

iTrader: (1)

Here is a Stratus 3.0 Touring Body Template

nsr250repsol

iTrader: (9)

If you could do top views and side views that would be most helpfull for me. BTW thank you for all of the time and effort you have put in to help all of us painters on the thread!

scoobydo

iTrader: (1)

As soon as I can Find Top and Side Views, I will post them for you.
Thanks for the kind words!
As long as they help!
I know I use them to get ideas down. I'd rather go through 10 blanks than risk ruining a lexan with something I don't like.
keep them pics coming!

rcbarrmeister

Scooby, Thanks for doing the Charger for me. It looks good and I appreciate your taking the time to do this.

Kropy

iTrader: (12)

Scooby, what about a B4,XXX, XXX-4,XXX-T

dnice454

What actually are these for

scoobydo

iTrader: (1)

For painters who want to sketch out a design beforehand to see if it works. I know I go through about 5 or 6 of these before I even begin to mask an actual body. It takes the guess work out of the process and allows me to focus on the small details of getting the job right.
It's not for everybody, most people just like to design as they go.
Its a personal choice.
I found that templates where hard to find so decided to get a collections going here.

yuckfoo

haven't beenon here in a while by chance any xxx nt crowd pleazer... proline i seen some of your templates awesome i hate
free handing a body sketch... getting a light table for my tat's
so i can use that but if you've got one already i'd appreciate
it if you could post it or send me an e-mail w/ it.....thanks man peaceout...

scoobydo

iTrader: (1)

Here you go.
The picture I found was a bit small, but I think it came out fine.

Crowd Pleazer NT

yuckfoo

well that was quick thanks man i'm getting ready to do a few bodies for the local hobby shop... this'll help get some ideas down...appreciatte it.....thanks for such a quick response....

yuckfoo

by the way size came out fine....