sheetmetal2

iTrader: (6)

is it alright to tape over fastcolor after one color/design has been laid down? Will it take the paint off when i pull the tape up?
Thanks For your help.

revo523

iTrader: (8)

I would let it sit over night to be on the safe side and you should test on a corner first and see what happens.

sheetmetal2

iTrader: (6)

Wel that is kind of what I figured on doing. So far I have had limited luck in painted. So far this project has been going good and I hate to ruin the progress so far. Just curious to see if anyone has had any experience with this.

wes

iTrader: (1)

if you are really worried about it use low tac tape. but if you let it sit for about 4 hours or so it should be fine. anything small i use faskolor.

sheetmetal2

iTrader: (6)

Is it ok to speed up the dry time with a heat gun/blow dryer? or is that asking for trouble?

revo523

iTrader: (8)

Thats what i do in between coats, pull out the hair dryer!!

wes

iTrader: (1)

it will dry faster but it wont adhere faster. so it will feel dry but the actual paint underneath wont be dry and it chips very easily.

sheetmetal2

iTrader: (6)

Thanks,
I guess that makes sense now that you say it. It has flaked off real easy and that is why I was so leary about putting masking tape over it.