aus jd 2703

iTrader: (5)

hey guys mainly just checking to see if what i do is right,
between colors i clean the color cup and just flush the brush put my finger over the tip until no sign of paint.
after a days painting i flush like usualy i remove 1,2,3 and clean with tissues and windex. i usually just undo needle chuck and remove the needle and all attached i ussually just wipe the needly down with a damp cloth. finally washed the fluid cap.
so am i doing anything wrong should i do anything else?
cheers guys also can u reffer to the diagram as i am a real noob.

aus jd 2703

iTrader: (5)

any one?

Kcdzim

iTrader: (1)

Personally, whenever I tear the full airbrush down, I clean with lacquer thinner, because it's a bit more effective at removing any acryllic paint that has bonded to the airbrush.

aus jd 2703

iTrader: (5)

how do u clean number 3 i think its a fluid nozzle?
thanks ill picjk some thinners up soon

Kcdzim

iTrader: (1)

Usually, I drop it in the thinner, then pull a qtip apart and stick some cotton soaked in thinner on the end of the needle, then spin the cotton in the nozzle.