HPI Super Electric RS4's W/Brushless system
#646
#647
Tech Adept
iTrader: (18)
Hey everyone - I've designed a carbon fiber chassis, upper deck, and battery bracket package for the Super chassis. Material is 2.5mm graphite.
It's designed it be compatible with stick packs (NiMH and 2S LiPo) in 3 locations - forward, rearward, and middle. Holes are provided for the stock stick pack mounts, also compatible with the outboard stock holes for anyone still using 7 cell sticks. The battery brackets are adjustable, accommodating stick packs up to 48mm wide and 133-143mm in length. There are a couple slots to help those who want to mount 3S stick packs longitudinally with tape. Finally, the motor bay has been opened up a bit to fit brushless cans.
A complete set includes the main chassis, upper deck, and a pair (2) of the battery brackets. Standoff posts for the battery brackets are not included, but can be found easily. At this point I am looking for firm commitments, as I need to order at least 10 of these to get production kicked off. From there they can be produced in multiples of 5-10.
Please contact me regarding pricing.
I have ordered a laser-cut prototype of these pieces to verify that everything bolts up correctly. Once I've sorted that, I will start production with a 4-6 week lead time. Please contact me if you are interested in a set, and I'll add you to the list. I will come 'round to collect Payment (PayPal) when we are ready to kick off machining.
It's designed it be compatible with stick packs (NiMH and 2S LiPo) in 3 locations - forward, rearward, and middle. Holes are provided for the stock stick pack mounts, also compatible with the outboard stock holes for anyone still using 7 cell sticks. The battery brackets are adjustable, accommodating stick packs up to 48mm wide and 133-143mm in length. There are a couple slots to help those who want to mount 3S stick packs longitudinally with tape. Finally, the motor bay has been opened up a bit to fit brushless cans.
A complete set includes the main chassis, upper deck, and a pair (2) of the battery brackets. Standoff posts for the battery brackets are not included, but can be found easily. At this point I am looking for firm commitments, as I need to order at least 10 of these to get production kicked off. From there they can be produced in multiples of 5-10.
Please contact me regarding pricing.
I have ordered a laser-cut prototype of these pieces to verify that everything bolts up correctly. Once I've sorted that, I will start production with a 4-6 week lead time. Please contact me if you are interested in a set, and I'll add you to the list. I will come 'round to collect Payment (PayPal) when we are ready to kick off machining.
Last edited by magnus213; 10-19-2014 at 06:19 PM.
#648
Tech Rookie
Last edited by NSANAT; 07-20-2014 at 04:08 PM.
#650
Tech Adept
iTrader: (18)
Found battery posts that work with my brackets. Nicely centered on the battery, good clearance to the wires.
Realized that you can use the HPI stock bracket on one end and the new bracket on the side with the wires.
[/QUOTE]
Looking to get a few more commitments before I kick off an order of these parts.
Realized that you can use the HPI stock bracket on one end and the new bracket on the side with the wires.
[/QUOTE]
Looking to get a few more commitments before I kick off an order of these parts.
#654
These are beautiful chassis! I'll post some more pictures once I get mine assembled!
Thanks Magnus!
Thanks Magnus!
#656
Looking good!
#658
It is an awesome chassis. I'm going to be assembling mine in the near future. I'll post pictures when it's finished.
#660
Tech Adept
iTrader: (18)
If you're after the mesh look, HPI makes a design and they're pretty easy to find. Those are "narrow" size only, though. The FW03 has a narrow/wide staggered offset, which makes them look cooler / harder to find wheels and tires for.