GT8 Class--buggy-based on road electric!
#17
I bought the Kyosho electric conversion kit for the Inferno GT2. I'll post some pictures once I get it up and running.
#19
It should and you can eliminate the brake servo and brakes. A pinion gear should slide right on after you remove the adapter for the clutch bell.
#20
MP 777
I am running a Kyosho MP 777 converted to a GT-E car. I used the Kyosho "e" conversion kit (expensive but fits and works perfectly)
#21
Definitely glad to see this thread! I will try to add some shots of my IGT2 Brushless. I finally finished it this weekend and did some test runs with it.
#22
Hey will, What battery are you using?
#23
Nice to see this thread open up here. We are trying to get this class going down here in San Diego. We had our first club race a couple weeks ago. Here are few pics. There are 3 DM-1 Tekno Conversions (Impakt, Red Bull and Lightning Mcqueen), 1 DM-1 RC Monster conversion (Rising Sun), 1 Losi conversion (Tekno paint) and 1 Kysosho GT-2 home brew conversion (Corvette)
By the way I painted all but the Corvette and Rising Sun bodies. Enjoy the pics.
By the way I painted all but the Corvette and Rising Sun bodies. Enjoy the pics.
#24
Tech Champion
iTrader: (94)
Bobby, brushless motors are designed 2 ways, ones with sensors and ones without.
For 1/8 scale, as far as I know, tekin and Novak are the only sensored systems. Novak is behind in 1/8 scale technology so don't even bother. Tekin can be run with the sensor on or off.
Castle systems does not have sensors.
For 1/8 scale, as far as I know, tekin and Novak are the only sensored systems. Novak is behind in 1/8 scale technology so don't even bother. Tekin can be run with the sensor on or off.
Castle systems does not have sensors.
#25
Tech Champion
iTrader: (94)
Here is the link for my trf801 GTe build project.
http://www.rctech.net/forum/nitro-ro...project-4.html
http://www.rctech.net/forum/nitro-ro...project-4.html
#26
I believe a couple of the guys running in our club race were running the MM Pro.
I haven't run the MMP in an 1/8 sensored yet. We are all running Tekno Elektri-clutch systems so low speeds are under control and very predictable without having sensored system.
I haven't run the MMP in an 1/8 sensored yet. We are all running Tekno Elektri-clutch systems so low speeds are under control and very predictable without having sensored system.
#28
#29
Raman, I am willing to head down to San Diego to drive with other GT's. I am sure we could learn a lot from the Tekno guys regardless if we use their stuff or not.