Excellent! Like new Blade CP Pro (TONS of parts and upgrades included)
#1
Excellent! Like new Blade CP Pro (TONS of parts and upgrades included)
I bought two Blade CP Pro's within 2 weeks of eachother. I bought one from a person on this site and shipped it to a relative and the new one...well, I don't have time to learn to fly it. Pics to follow!
I have a great heli that I have no time to learn to fly now that racing season is started. There are tons of new parts either in the package or just installed and unused. I spent a lot of money making sure I had parts; this was to be my first non-coaxial heli and had hoped to make time to learn to fly it. Spring winds and start of the off-road season have made it impractical to keep such a nice heli in the bag.Also included are 2 1300MaH 3s lipos with balance charger.
Blade CP Pro with standard out of the box equipment:
11.1V Lipo, Radio, 3 in 1, instruction manual, DC Charger. I have installed an antenna tube to get rid of the mess. Also includes the training gear. Canopy is unscratched, rest of bird looks NEW. Currently it has a brand new set of Plasti-blades installed. There are a total of 3 sets. No flight time on any of them as of this post.
Crash Kit was purchased and flat blades were used. So the new symetrical blades are unused. The flat bottoms made the slightest amount of contact with the rug and need to be re-covered. That's when I decided to buy the plasti-blades.
Upgrades installed:
G90 HH GYRO 2 weeks old. Only turned on to setup with help from hobby shop.
Micro Heli Tail stabilizer, vertical.
Plastiblades (white set)
New parts. Not installed, New in Package
Micro-heli dual tail motor mount
1 Yellow and 1 White Set of flat bottom plasti-blades
1- EFLH1163 Paddle Control Pushrod Set
1- GWS Flybar weights
1- EFLH1146 Rotor Head Set
1- Helimax Tracking tape
2- EFLH1158 O-Ring Set
3- EFLH1122 Tail Rotor
1- EFLH1150 Paddle Set
1- EFLH1169 Crash Kit
1- EFLH1119 Tail Motor w 8 tooth pinion
1- EFLH1110A 370 Motor with 8 tooth 5M Pinion
2- EFLH1171 Bell Mixer Main Blade Grip Set
1- EFLH1155 Main Shaft and Drive Gear
1- EFLH1166 Main Frame Assy. (Frame, boom, rear motor mount, tail motor wire.)
1- EFLH1160 Tail Boom
1- EFLH1131 Tail Motor Heatsink (Blue Almuninum unit)
1- EFLH1135 Retaining Pin (6)
2- EFLH1159 Hardware set (screws, nuts, washers etc...)
2- EFLH1120 Tail Rotor Drive and Gear Set
1- EFLH1144 Head Damping Shim (8)
1- EFLH1143 Spindle
1- E-lite Micro Heli Pitch Gauge
1- MicroHeli MH-CP05M Aluminum CNC Twin motor tail mount
1- Globee Intellitach
1- Wingtote Micro Heli carry bag. (This thing is NICE)
The pictures will tell the COMPLETE story of just how much is included for a heli that has less than 6 complete attempts to fly it.
Also, the really nice part I am including a BRAND NEW Wingtote micro-heli carrying bag with this sale. Also included are a screw-driver set, royal oil for bearings, micro heli pitch gauge from e-flite, general purpose oil for non-ball bearing parts.
Like I said I spent a LOT of money getting all of this together and don't have time to learn to fly it. I have invested more than 650.00 in all of these items.
Please feel free to ask any questions. Also, check my feedback here and on Ebay (truraza_nm).
Thanks for looking!
I have a great heli that I have no time to learn to fly now that racing season is started. There are tons of new parts either in the package or just installed and unused. I spent a lot of money making sure I had parts; this was to be my first non-coaxial heli and had hoped to make time to learn to fly it. Spring winds and start of the off-road season have made it impractical to keep such a nice heli in the bag.Also included are 2 1300MaH 3s lipos with balance charger.
Blade CP Pro with standard out of the box equipment:
11.1V Lipo, Radio, 3 in 1, instruction manual, DC Charger. I have installed an antenna tube to get rid of the mess. Also includes the training gear. Canopy is unscratched, rest of bird looks NEW. Currently it has a brand new set of Plasti-blades installed. There are a total of 3 sets. No flight time on any of them as of this post.
Crash Kit was purchased and flat blades were used. So the new symetrical blades are unused. The flat bottoms made the slightest amount of contact with the rug and need to be re-covered. That's when I decided to buy the plasti-blades.
Upgrades installed:
G90 HH GYRO 2 weeks old. Only turned on to setup with help from hobby shop.
Micro Heli Tail stabilizer, vertical.
Plastiblades (white set)
New parts. Not installed, New in Package
Micro-heli dual tail motor mount
1 Yellow and 1 White Set of flat bottom plasti-blades
1- EFLH1163 Paddle Control Pushrod Set
1- GWS Flybar weights
1- EFLH1146 Rotor Head Set
1- Helimax Tracking tape
2- EFLH1158 O-Ring Set
3- EFLH1122 Tail Rotor
1- EFLH1150 Paddle Set
1- EFLH1169 Crash Kit
1- EFLH1119 Tail Motor w 8 tooth pinion
1- EFLH1110A 370 Motor with 8 tooth 5M Pinion
2- EFLH1171 Bell Mixer Main Blade Grip Set
1- EFLH1155 Main Shaft and Drive Gear
1- EFLH1166 Main Frame Assy. (Frame, boom, rear motor mount, tail motor wire.)
1- EFLH1160 Tail Boom
1- EFLH1131 Tail Motor Heatsink (Blue Almuninum unit)
1- EFLH1135 Retaining Pin (6)
2- EFLH1159 Hardware set (screws, nuts, washers etc...)
2- EFLH1120 Tail Rotor Drive and Gear Set
1- EFLH1144 Head Damping Shim (8)
1- EFLH1143 Spindle
1- E-lite Micro Heli Pitch Gauge
1- MicroHeli MH-CP05M Aluminum CNC Twin motor tail mount
1- Globee Intellitach
1- Wingtote Micro Heli carry bag. (This thing is NICE)
The pictures will tell the COMPLETE story of just how much is included for a heli that has less than 6 complete attempts to fly it.
Also, the really nice part I am including a BRAND NEW Wingtote micro-heli carrying bag with this sale. Also included are a screw-driver set, royal oil for bearings, micro heli pitch gauge from e-flite, general purpose oil for non-ball bearing parts.
Like I said I spent a LOT of money getting all of this together and don't have time to learn to fly it. I have invested more than 650.00 in all of these items.
Asking 465.00 SHIPPED (OR BEST OFFER)
Please feel free to ask any questions. Also, check my feedback here and on Ebay (truraza_nm).
Thanks for looking!
#2
any trades?
#3
What have you got? I am looking for a GT2, TREX 450SE V2...
Thanks!
Thanks!
#4
BUMP!!!