Novarossi Plus 12+3ct Glow Plug recommendation
#1
Novarossi Plus 12+3ct Glow Plug recommendation
What plug should I be using? I am currently still using the plug that came with the engine. The engine is fully broken in now with a half gallon of gas through it.
#3
C6Tf if using 16% Nitro and C7Tf is using higher Nitro
#4
Oh ok cuz i am using 30% with a shim.
#5
Tech Adept
Originally Posted by BIGTACO
Oh ok cuz i am using 30% with a shim.
#6
I'm running 7f. Runs good but I could use a little bit more bottom.
#7
Tech Adept
Originally Posted by Racing4Evo
I'm running 7f. Runs good but I could use a little bit more bottom.
#8
I use 6tc or 6tf plug........
this is the clutch setup I use for MTX4
flyweights drilled to 4mm diameter holes
MSR ultra hard spring at 1.5~1.7mm
clutch gap 0.60mm......
yellow shoe......
this is the clutch setup I use for MTX4
flyweights drilled to 4mm diameter holes
MSR ultra hard spring at 1.5~1.7mm
clutch gap 0.60mm......
yellow shoe......