Picco 2011 TORQUE onroad engines

You're on Page 12 of 29
Go to
  • New Picco .21
    Hello everyone, I just received my Picco Torque .21 EDO motor. Should I add a Shim for 25% Nitro and also do i have to use a washer under the plug? Thanks in advance.
  • Quote: Hello everyone, I just received my Picco Torque .21 EDO motor. Should I add a Shim for 25% Nitro
    You can if you like, depending the track size you run.
    Is your track small, keep it as it is, if the track is bigger, add 0.1mm.


    Quote:
    and also do i have to use a washer under the plug? Thanks in advance.
    are you serious!
    NO!...
    These plugs are so called "turbo" plugs, they have a conical end.
  • What's the stock head shims? .4mm?
  • Ok Thanks for the info. I had an old picco plug that did'nt seem to seat right. But I have never used a washer with a "turbo plug". Will order new plugs. Thanks!
  • anyone know what the differences are in these two manifolds that come with the picco 2033 pipe http://www.rc-mushroom.com/product_i...ducts_id=20270 and http://www.rc-mushroom.com/product_i...ducts_id=20158 thanks
  • Quote: anyone know what the differences are in these two manifolds that come with the picco 2033 pipe http://www.rc-mushroom.com/product_i...ducts_id=20270 and http://www.rc-mushroom.com/product_i...ducts_id=20158 thanks
    Yes, part # ...7726 is the conical manifold the other is not. Conical= better power band, Non-conical is better fuel economy. Maybe someone else can provide more detail.
  • Quote: What's the stock head shims? .4mm?
    The exploded view(parts sheet) shows part#2014- 0,1mm and #2068-0,2mm.
  • Any shop in USA selling the new Picco engines? How come I still don't see any, it has been released like over a month already? The new Nova is too expensive now. I want to get something cheaper in price at the same fast performance.
  • Quote: Any shop in USA selling the new Picco engines? How come I still don't see any, it has been released like over a month already? The new Nova is too expensive now. I want to get something cheaper in price at the same fast performance.
    We will have them in about one week.

    www.murnanmodified.com
  • The Picco Torque .21 engines are in stock now.
  • Superior Hobies Instock
    The .21 Picco Tq Edo Modified Power Pack are in stock .12 on arrival
    http://www.superiorhobbies.com/istar...&id=PIC9231!SH
  • whats factory needle settings for the .21 ?
  • Quote: whats factory needle settings for the .21 ?
    A good base setting for the .21 Torque is as follows.

    High Speed Needle = 3 turns out
    Low Speed Needle = 4 turns out
    This is flush with the housings on both needles.


    The factory settings are 1/2 turn leaner than what I have listed above.

    For break in, I would start 4 turns out on the LSN, adn 4 turns out on the HSN.
  • Technical Support
    Please feel free to direct any technical support questions regarding the Picco Torque engines to me. You can contact me at the following email address, or just ask on this thread.

    [email protected]

    or

    [email protected]
  • Thanks for the info

    Question, how do make my Picco super duper fast like yours at the Worlds?