Murnan Modified Motors
#1456
Uriah,
Ran the motor that i brought off you at our state titles this weekend along with one other and just thought you would like to know that we both finished in the top 10. Your motors are brilliant and it just seems to be getting faster and faster, cant wait to run the other one.
Daniel
Ran the motor that i brought off you at our state titles this weekend along with one other and just thought you would like to know that we both finished in the top 10. Your motors are brilliant and it just seems to be getting faster and faster, cant wait to run the other one.
Daniel
#1457
#1458
#1459
Uriah thank you for such a great powerplant
I was very happy with my package this weekend allowing me to set TQ in sedan and lead race until the last three minute mark when I had a commanding lead and came in for a splash, unfortunately I flamed out my fault and causing me to loose the lead...oh well that's racing and it doesn't take away from the fact that there isn't anything Id rather be doing than racing Congrats to all the winners especially to Maxy for a great return to Touring hope you come out to more races
Port Charlotte puts on a great show and I highly recommend for anyone that can make it out you will not be disappointed David Larry, Gary Tuttle and all your help congratz great job.
Thank you to all my sponsors: Kyosho America,Werks Fuels
Murnan Modified Motors, Pnp Hobbies
2mm Designs
http://www.rc-racing.org/pc.html
I was very happy with my package this weekend allowing me to set TQ in sedan and lead race until the last three minute mark when I had a commanding lead and came in for a splash, unfortunately I flamed out my fault and causing me to loose the lead...oh well that's racing and it doesn't take away from the fact that there isn't anything Id rather be doing than racing Congrats to all the winners especially to Maxy for a great return to Touring hope you come out to more races
Port Charlotte puts on a great show and I highly recommend for anyone that can make it out you will not be disappointed David Larry, Gary Tuttle and all your help congratz great job.
Thank you to all my sponsors: Kyosho America,Werks Fuels
Murnan Modified Motors, Pnp Hobbies
2mm Designs
http://www.rc-racing.org/pc.html
#1461
Uriah
Any chance you answering my mail?
Cheers
Any chance you answering my mail?
Cheers
#1462
I have a murnan modifies x12 for sale , about 1/2 gallon in it. very strong engine. just not doing onroad anymore. 175 obo.
#1463
went on ebay today!!
#1464
You've got PM, Grinder.
#1465
Tech Rookie
Quote:
Originally Posted by El Buenote [View]
Hi Grinder
I have a matrix munrnan mod., when do you suggest I should change the main bearing? I've race it only once and it already making a noise like the main bearing is bad. It was fast as hell, it never went more than 215F.
Thanks for your time.
You can send the engine in for me to check. The bearings should last longer than that. Is the top of the piston pitted?
Originally Posted by El Buenote [View]
Hi Grinder
I have a matrix munrnan mod., when do you suggest I should change the main bearing? I've race it only once and it already making a noise like the main bearing is bad. It was fast as hell, it never went more than 215F.
Thanks for your time.
You can send the engine in for me to check. The bearings should last longer than that. Is the top of the piston pitted?
#1466
Tech Initiate
Murnan Modified Motor Win in PR!!!!
Thanks Murnan for your products!!!
The Novarossi 353 was testing in Barceloneta's track here in Puerto Rico and the result was: TQ and 1st in the A main. Excellent product, It used with Pipe System Max, and get 5:25 minutes of run time with 220F of temperature. I use Corozo Racing Fuel 30%, Excellent product, too.!!!
Any questions about the setup, just ask!!!
Thanks!
The Novarossi 353 was testing in Barceloneta's track here in Puerto Rico and the result was: TQ and 1st in the A main. Excellent product, It used with Pipe System Max, and get 5:25 minutes of run time with 220F of temperature. I use Corozo Racing Fuel 30%, Excellent product, too.!!!
Any questions about the setup, just ask!!!
Thanks!
Last edited by Geovannie; 09-03-2007 at 09:29 AM.
#1467
Thanks Murnan for your products!!!
The Novarossi 353 was testing in Barceloneta's track here in Puerto Rico and the result was: TQ and 1st in the A main. Excellent product, It used with Pipe System Max, and get 5:25 minutes of run time with 220F of temperature. I use Corozo Racing Fuel 30%, Excellent product, too.!!!
Any questions about the setup, just ask!!!
Thanks!
The Novarossi 353 was testing in Barceloneta's track here in Puerto Rico and the result was: TQ and 1st in the A main. Excellent product, It used with Pipe System Max, and get 5:25 minutes of run time with 220F of temperature. I use Corozo Racing Fuel 30%, Excellent product, too.!!!
Any questions about the setup, just ask!!!
Thanks!
RCPANAMA
#1468
Tech Initiate
Kyosho EVO WC
#1469
Grinder.
I got the OS 18 TZP in the RRR and managed 89 mph. It was uphill, against the wind with low gearing so I think it could get 100+.
here is a vid of 87 mph
http://youtube.com/watch?v=UyMpLFYd0JY
I just have to sort the triple out for the speed event
Cheers
I got the OS 18 TZP in the RRR and managed 89 mph. It was uphill, against the wind with low gearing so I think it could get 100+.
here is a vid of 87 mph
http://youtube.com/watch?v=UyMpLFYd0JY
I just have to sort the triple out for the speed event
Cheers
#1470
Thanks Murnan for your products!!!
The Novarossi 353 was testing in Barceloneta's track here in Puerto Rico and the result was: TQ and 1st in the A main. Excellent product, It used with Pipe System Max, and get 5:25 minutes of run time with 220F of temperature. I use Corozo Racing Fuel 30%, Excellent product, too.!!!
Any questions about the setup, just ask!!!
Thanks!
The Novarossi 353 was testing in Barceloneta's track here in Puerto Rico and the result was: TQ and 1st in the A main. Excellent product, It used with Pipe System Max, and get 5:25 minutes of run time with 220F of temperature. I use Corozo Racing Fuel 30%, Excellent product, too.!!!
Any questions about the setup, just ask!!!
Thanks!