Good News

MassiveMods is now the australia national distributor for Go Tech

please all dealer and private enquiries , do not hesitae !

Cheers MM

02 95572770

Id like to make a note on the scorpion 333 fuel. the first time i used the fuel was the South Australian state titles 1/10th nitro on road. the initital switch i found the engine way boggy and lacked power. a little tuning soon fixed this. i had leaned the top and bottom end quite considerably. it was a bit hard to get used to as the fuel didnt really smoke on the top end. i ran maostly around 200F the whole weekend. unfortunatley, i did not have the fuel available for the next weekend . the WA state titles. i had a hard time tuning my engines after running the Scorpion 333. it was very frustrating weekend. but i later found out the tank was ruptured and causing my tune problems. and i do believe the tank was ruptured in adelaide, but the Scorpion 333 fuel kept things cool and well lubricated, that i think it masked the problem :lol:
i am now in the process to use this fuel from now on. very impressed, and inspection after adelaide of teh internals, was like new. a very minor scratch or 2 on the piston , but i think was there before. thanks MM .

hi mark can you help me with any information,links or methods on how to determine correct head clerance thx in advance gavin

What size engine are you refering to ?

generally speaking

.21 with 25% nitro is .5 total shim 30% nitro .6 to .8

.12 with 16% nitro is .2 to .25 total

Total geometric comp will effect this , obviously if you have a larger turbo dome you can afford to run it a little closer.

i was refering to the nova plus21-7 but if that general guide is ok then thank you for your advice,btw have you seen mark stringers lastest post on the sunny coast off road tread,hope you can make it

Yeah run the standard shimming in the nova ... i think is 2 X .2 and a >.1 so total .5 for 25 % nitro

Yes im looking into being there , if i do ill bring my buggy up for a bash

Cheers MassiveMods

Hi,

You got an email

:blush:

Anyone used this fuel running a Orion WASP CRF .12 ? resluts or feed back would be super dooper...

Cheers - planning to buy some for up coming meet

where are you located ?

Hi,I was wandering,whats the best way to get one of your mod engines?.I run a 12tz(p)in my nt1.Do I get a new one and ship it to you?.Let me know,you can pm me with prices,and the different stages of mods.Thanks


AL

Al,
Mark puts his prices of the different level of mods on his web site. http://www.massivemods.com.au/services.php

Probably best to give him a call and have a chat to figure out what you are after.

Steve

thanks for the

the new site has more info etc

www.massivemods.com.au

MG66 is now going on road ...stay tuned :D

where is it ?

I'm tuned.....;)