PLease help ofna 26 force
 

I need help I can't find the button head part number ofn52020 can anyone help me very one is out of stock I have a savage 25 hpi if not I will just throw out the engine and buy a new one any one be kind enough to help thanks

in all honesty I would save the $20 you will pay for a head button and shipping and get a different engine. Put the money towards another better quality engine. You dont have to spend a lot of $ either ,there are a lot of cheap big blocks that are a big step up from that for not a lot of $

Hpi 25 engine
 

Yea I was thinking that too I can get a ofna 28 force for 138 what's your suggestion on engines on eBay I have root start system. Thanks for feedback tho

Hpi 25 engine
 

Yea I was thinking that too I can get a ofna 28 force for 138 what's your suggestion on engines on eBay I have root start system. Thanks for feedback tho

Can you recommend one for like 150 or around there that the pieces wouldn't be hard to find neither thanks for the savage 25 one that fits right in

A little above your budget, but probably the best in that "range" assuming you need a pullstart

http://www.nitrohouse.com/Picco-28-E...t_p_13890.html

picco 28
 

[QUOTE=BrakeTurnAccelerate;11072693]A little above your budget, but probably the best in that "range" assuming you need a pullstart



Yes that's way out my budget I had that on my Hpi xl my savage 25 I don't add pend expensive anything off eBay? That woupdnt need extra mounths I prefer Roto start over hand start I'm new to nitro rc I normally ran Lipo but I switched I decided to go to nitro love the sound smoke smell etc lol my price range is 150 the most for a engine

http://www.ebay.com/itm/Dynamite-M26...item4843bf8092

http://www.terranovahobby.ca/product...&cat=32&page=2

The Picco is an awesome .28 engine but with your price range.

try these , they are not the baddest .28s but they are a big step up from your savage .25 engine.

http://gshobby.com/content/dynamite-...pullspin-start


http://gshobby.com/content/axial-ax0...-spec-1s-green


http://gshobby.com/content/dynamite-...pullspin-start

Wow so many choices will all of these fit my savage 25 or will I have to modify anything get extra mounts or etc?

GUYS WILL THIS WORK THE NTRO STAR 25 button head working on the ofna force 26? I read this earlier

I was gonna say to try that. I knowone of the hpi engines was force based just didnt remember which one. Maybe u ask Maximo on here. He may know for sure.

I would buy the button head I tried using loctite to like glue the plug to the hole it holds but didn't try it

Has anyone heard of the website sabulatech they sell rc part?