20% fuel settings
 

hey guys i need some help with high speed and low speed settings on a xtm xt2 buggy.i am running byron race gen2 20% nitro 16% lubrication.the pull start keeps slipping after i run the car and when i take it apart the one way bearing is always coated in oil so im guessing my settings are 2 rich,what would you guys recommend.by the way i live in the uk so its pretty cold here now dunno if that makes a difference.

P.S the break in settings for this buggy are, high speed:3.5 turns out. low speed:3 turns out