dreaux

iTrader: (5)

What would cause the head shims to be slightly wet? The head is not loose.

motomatt

iTrader: (12)

Re-using shims numerous times can cause them to not seal well even with the heat sink tightened.

dreaux

iTrader: (5)

Hadn't thought of that thanks.

22Racer

iTrader: (67)

There are alot of motors that the top of the sleeve is not very flat. When I pinch sleeves for guy's I stone the top of the sleeve flat.

Rex

dreaux

iTrader: (5)

should I worry about this?

22Racer

iTrader: (67)

You can look at the shims and sometimes where it may be leaking. I also put oil on the threads of the head screws, you can get them tighter without seizing.

Rex