Team Driver Luis Virira
 

Nice work Joe!!

My son and I greatly appreciate everything you and Ed do for us btw.

Thanks

recieved my race prep and my full mod today, racing on sunday but was going to run some fuel through them tomorrow. how much fuel before I can start to "race tune" it?

Ryan

They come broke in so you can start race tuning them right away. They will how ever loosen up a touch more and you'll now when it happens cause the motor will go rich and you'll have to lean it 1 or 2 more hours.

yeah felt like they had just a smidge of metal pinch yet...so I was thinking just taking it easy the first tank and then start tuning it.

Thanks,
Ryan

well so far I have 5 tanks on both engines race prep and full mod, running them with AE2035 pipes buggy is very stout and was getting 11.5 mins and I havent "leaned" on it yet very much. now the truggy seems to not have nearly as much punch on the bottom but has a good top end. so I think I will be putting the full mod in the buggy and the race prep in the truggy....again this is with the AE2035 pipe so I will do some testing and go from their.

Ryan

blktransam try using the 086 pipe, you will notice a big diff in the bottom end.
This is the recomended pipe to date. http://www.amainhobbies.com/product_...-Hard-Anodized

single I know the 086 is the "pipe" right now wating on EB to realse his pipe though..as I said on buggy it rips from bottom to top! running the AE2035 I was getting over 11 mins not even leaning on it yet :)

Ryan

Ryan, I would pick up a 086....it's gonna be a little while b4 we do a pipe. mine is awesome with a 86!

alright Joe, will get a 86 comming- also did you get my fuel order?

Ryan

well good news! first race with the new JS engines today and quald. 2nd in truggy and buggy a-mains...truggy A-main I ended up winning by 1 lap truck was on rails and the EB mods JS engine was DIALED! buggy main was battling for 1st with 4 mins to go in the 20 min main and lap traffic came up and I got stuck in the middle :(, ended up in 2nd 5 secs. back.

THANKS EB mods!!

Ryan Klemme

Ryan,
I got your order. Things got a little delayed at ebmods cause we got hammered with snow and lost internet for a few days. My only internet for the past few days has been via iphone and my service is slow where i live. Expect a invoice tomorrow. =)

Glad to gear you like the engine!

I just got my 2 JS full mod engines before motorama and only put like 1 tank through both of them in my buggy and truggy before leaving for the race. I can't find one bad thing to say about Ed's engines. I am running the 086 in the buggy and the 007 in truggy. Both were very quick off the line and real fast down the straight. I was hoping that running the full mod in truggy that I would have enough bottom end. Let me say this thing has plenty of off the line punch, you won't be disappointed. After running both vehicles for 7mins. I still had just a little under a half a tank left in both of them. I can definitly see 10mins of runtime. Thanks Ed for such a great engine, and Joe for your help and support. By the way Joe, your air filters and filter oil are awesome.

My son TQ'd and won this weekend at The Turkey Farm in NC w/ his JS engine and Lucky7RC air filter. :nod:

Thanks for everything Ed and Joe!!!!

whats everyone geting for temps and run times?...engines were temping between 190-200 and getting almost 12 mins havent leaned on them too much yet eighter...great engine! also running AE 2035 pipes