Go Back  R/C Tech Forums > General Forums > Nitro Off-Road > Offroad Nitro Engine Forum
Rayaracing sleeve resizing and tooling >

Rayaracing sleeve resizing and tooling

Like Tree15Likes

Rayaracing sleeve resizing and tooling

Old 11-08-2013, 07:26 PM
  #1096  
Tech Master
iTrader: (13)
 
Join Date: Nov 2012
Posts: 1,140
Trader Rating: 13 (100%+)
Default

Ray,
I have a piston/sleeve from a backup motor that I took apart after I ran it to clean and never reassembled. The motor was left in a box in pieces and when I opened the box to assemble and use it the crank was through one of the ports on the sleeve, when I was assembling it the piston wouldn't go in the sleeve because the crank bent a piece into the liner stopping the piston from going in.
Before noticing this I scratched the crap out of the piston and there's a sharp piece from the port bent into the sleeve. The motor was pretty new and don't think it needs resizing as of yet, but is there anything you can do for this engine? Before 12/3/13? Wish I heard of this before today
JOE SI is offline  
Old 11-09-2013, 09:51 AM
  #1097  
Tech Fanatic
iTrader: (23)
 
Join Date: Nov 2002
Location: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Posts: 831
Trader Rating: 23 (100%+)
Default RayAracing

Originally Posted by JOE SI
Ray,
Before noticing this I scratched the crap out of the piston and there's a sharp piece from the port bent into the sleeve. but is there anything you can do for this engine? Before 12/3/13? Wish I heard of this before today
Joe, The above described sleeve breakage at porting windows CANNOT be repaired.

Call me on the phone I may have replacement small block sleeve here.

RayAracing
RayA is offline  
Old 11-09-2013, 05:56 PM
  #1098  
Tech Master
iTrader: (13)
 
Join Date: Nov 2012
Posts: 1,140
Trader Rating: 13 (100%+)
Default RB T10rc p/s

This is the furthest ithe piston will go in the sleeve
Attached Thumbnails Rayaracing sleeve resizing and tooling-image.jpg  
JOE SI is offline  
Old 11-09-2013, 05:58 PM
  #1099  
Tech Master
iTrader: (13)
 
Join Date: Nov 2012
Posts: 1,140
Trader Rating: 13 (100%+)
Default Rb t10rc

Here's a pic of the little piece stopping it, not sure you can see it
Attached Thumbnails Rayaracing sleeve resizing and tooling-image.jpg  
JOE SI is offline  
Old 11-09-2013, 06:00 PM
  #1100  
Tech Master
iTrader: (13)
 
Join Date: Nov 2012
Posts: 1,140
Trader Rating: 13 (100%+)
Default Bend

This is the port where it's bent stopping the piston
Attached Thumbnails Rayaracing sleeve resizing and tooling-image.jpg  
JOE SI is offline  
Old 11-13-2013, 06:55 AM
  #1101  
Tech Fanatic
iTrader: (23)
 
Join Date: Nov 2002
Location: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Posts: 831
Trader Rating: 23 (100%+)
Default RayAracing

Originally Posted by JOE SI
This is the port where it's bent stopping the piston
Put your phone number on recondition-resizing order form so I can call you with details
RayA is offline  
Old 11-18-2013, 12:40 PM
  #1102  
Tech Fanatic
iTrader: (23)
 
Join Date: Nov 2002
Location: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Posts: 831
Trader Rating: 23 (100%+)
Red face RayAracing

Group Orders on bench, Erin(CA) Daniel(FL) Todd(Ky) in process,return ship in the AM. THANKS!
RayA is offline  
Old 11-20-2013, 04:48 PM
  #1103  
Tech Fanatic
iTrader: (4)
 
krash'um's Avatar
 
Join Date: Dec 2010
Location: Land of Aloha
Posts: 822
Trader Rating: 4 (100%+)
Default

Hi Ray,

I just sent you 4 sets. Please do what you can and perform your magic on them.

Aloha,
krash'um is offline  
Old 11-26-2013, 11:09 AM
  #1104  
Tech Fanatic
iTrader: (23)
 
Join Date: Nov 2002
Location: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Posts: 831
Trader Rating: 23 (100%+)
Thumbs up IMPROVED sealing surfaces

Originally Posted by krash'um
Hi Ray,

I just sent you 4 sets. Please do what you can and perform your magic on them.

Aloha,
Cicilio,
package arrived yesturday,serviced and return shipped today, very nice. thanks!
Ray
RayA is offline  
Old 11-27-2013, 12:05 PM
  #1105  
Tech Fanatic
iTrader: (4)
 
krash'um's Avatar
 
Join Date: Dec 2010
Location: Land of Aloha
Posts: 822
Trader Rating: 4 (100%+)
Default

Originally Posted by RayA
Cicilio,
package arrived yesturday,serviced and return shipped today, very nice. thanks!
Ray
Mahalos Ray, I'm looking forward to slapping them on. Happy Thanksgiving to you and yours.

Aloha,
Cecilio
krash'um is offline  
Old 12-04-2013, 08:45 AM
  #1106  
Tech Fanatic
iTrader: (23)
 
Join Date: Nov 2002
Location: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Posts: 831
Trader Rating: 23 (100%+)
Default LAP TOP COMPUTER REPAIRED

Jason, Got your PM. Thank You

Russ(CA) and KELLIE(Tasmania-Australia) Serviced and Packages return shipped yesturday. Thank You!

Was without a computer for clase to two weeks. These smart phones/I phones are over rated

Turnaround thru December should be great as ussual...

Thanks Guys

Ray
RayAracing
RayA is offline  
Old 12-10-2013, 03:42 PM
  #1107  
Tech Fanatic
iTrader: (23)
 
Join Date: Nov 2002
Location: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Posts: 831
Trader Rating: 23 (100%+)
Default RayAracing Reconditioning-Resizing Services

Louis(Maryland) your Ascendancy, Nova, and Alpha serviced today and return shipped.

Mark(AZ) your Werks is serviced and ships in the morning.

As with all my work......Sealing surfaces look great now

Thanks guys

Ray
RayAracing
RayA is offline  
Old 12-12-2013, 11:24 AM
  #1108  
Tech Fanatic
iTrader: (23)
 
Join Date: Nov 2002
Location: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Posts: 831
Trader Rating: 23 (100%+)
Default RayAracing

Scott,
Got your PM. As you can see where a little under the weather here Been busy moving snow last few days. Call me (716) 783-5198 ANY Further questions. And over 6 gallon report on the last recondition-resize done your Nova P5 last year ....NICE!!! Thanks

RayA is offline  
Old 12-23-2013, 03:27 PM
  #1109  
Tech Fanatic
iTrader: (23)
 
Join Date: Nov 2002
Location: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Posts: 831
Trader Rating: 23 (100%+)
Default Reconditioning-Resizing Service

Shipped Saturday Aviv(Israel)

Shipped today Aaron(KS) Jim(NH) Eric(NC) Robert (PA) Jason(NE) Bjarne(Denmark)

Going thru UPS DHL and USPS deliveries now





Thanks Guys.....Mery Christmass

Ray

RayAracing
RayA is offline  
Old 12-23-2013, 10:16 PM
  #1110  
Tech Master
 
Lille-bror's Avatar
 
Join Date: Jul 2009
Location: Frederikshavn, Denmark
Posts: 1,792
Default

Originally Posted by RayA
Shipped Saturday Aviv(Israel)

Shipped today Aaron(KS) Jim(NH) Eric(NC) Robert (PA) Jason(NE) Bjarne(Denmark)

Going thru UPS DHL and USPS deliveries now





Thanks Guys.....Mery Christmass

Ray

RayAracing
And Merry Christmas to you Ray
Lille-bror is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Your Privacy Choices -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.