Team Magic G4

You're on Page 458 of 784
Go to
  • also anyone know where to find the blitz bodies for sale in the states?

    RC mushroom has the Blitz Atliz which looks extremely good, and I want one but I don't want to worder something that can break from hong kong.
  • Ask for Pierre at:

    www.fxrhobby.com

    He has the bodies in stock.
  • Quote: sigh, absolutely no one has the hudy gauges in stock, guess im ordering the TM ones tonight.
    Dude, did you try Kamikaze Hobbies?? (714)997-8697. Sorry I don't know their toll free number. They are located in California. The dude you need to talk to is Sam. He just might have them in stock, along with the big decal. I have to talk to him in a bit, so I will ask him for you and report back. But if you have a chance before I reply back and you haven't ordered the TM, I would call him. Sam is a Killer dude, and carries lots of onroad stuff. He can get just about anything you want. If you look on their web site, don't go by that alone. He has 100's of other products that is not listed on his site. Call Sam.

    http://www.kamikazetoysandhobbies.com/home.htm

    Good luck bro!!! Later
  • Quote: I need alot of help on this one.

    there used to be one available for our cars but it as all but disapeared from the face of the earth.

    I am talking about a better roll cage / handling bar.

    I am tired and sick of that flexing plastic piece that provides no support what so ever and flexes putting your hand right into the engine.

    anyone know if a nice metal one, and if so can you post a link to where you can buy it "IN STOCK".

    thanks a million.
    bud the guys are using V1RRR roll bar.
    Check out the page rmdhawaii put together of Gansei's car.Its posted a few pages back.
  • is there something wrong witht he TM gauges? because I have already ordered them about 2 days ago.
  • nothing wrong with TM setup.
    Who did you order from ,check with them.
    If from Raceday ,i know he is recieving a new order and it should have arrived.
    Also TM have rebadged the setup under the HARD racing brand.So in futire it will be available as a HARD racing product.
    http://www.hard-racing.com/productio...7101&pageNum=1
  • i got mine from Trinity only because they had it for only $120.

    I still need a dacel sheet for the setup board but I can't find any nearby
  • Quote: Ask for Pierre at:

    www.fxrhobby.com

    He has the bodies in stock.
    Have you tried the Altis??? what body can you recomend or you are using Protoform?

    Thanks for your feedback
  • Dear GANSEI:
    Have you tried the body by KNACK B4 XR?
    Do you have some feed back,
    What do you thik of the ACTIVE bodys?

    Looking forward for your comments
  • Quote: TM's ordered
    Dude, sorry I didn't see you post this before I gave you Kamikaze's info. Well dude, in the long run I hope you get everything sttled. I have the TM setup station, and it is VERY good for the G4 cars. Not so good for my Serpent 720 though. The wheel hex's on the 720 are about 1mm thinner then the G4S and the nuts that tighten down the setup plates to the axles bottom out and don't snug the plate up against the wheel hexes on the 720. Make sence? So my only gripe with the TM is the issue stated above. Also, they are a bit time consuming to put together (break down and all for putting back in case, Just a lot of parts in my opinion. other then that, the craftsmanship and percision of this set is top of the line. The Hudy is not better in this area. I would say if anything that they are equal. Ok bro, enough rambleing...good luck with whatever you end up with. You could always cancell your TM order if it boiled down to that. But I'm NOT suggesting that, so please don't read into that too much. Just options you still might have is all. Later!!
  • UPDATE!

    Team Magic G4S screw kits are now in stock!



    Team Magic G4S 260-piece high grade 12.9 alloy steel socket head screw kit. Kit includes all applicable cap, flat and button head screws, as well as nuts, washers, lock washers (for cap screws on motor mount) and set screws.

    Please note: The kit does not include the pan head motor mount screws that go under the chassis to secure the mount. These are a specialty item and will not be included in the kit. Please order these from your nearest Team Magic parts supplier.

    The shopping cart supports shipping to the US and Canada. Please email us at [email protected] for all other international orders.

    Thanks and best regards,
  • Hey Tony,

    Awsome news - finally we got our act together and got this sucker of a kit made up, i got 3 orders on there way thank you for your super fast response.

    regards

    Frankie
  • That's great about the screw kit, to bad I just ordered the screws I needed last weekend. I would have gone with the kit. The screws look good and the packaging is great.
  • Quote: Have you tried the Altis??? what body can you recomend or you are using Protoform?

    Thanks for your feedback
    No. I have the mazda 6 and it's a good body. Can't go wrong.
  • Quote: Dear GANSEI:
    Have you tried the body by KNACK B4 XR?
    Do you have some feed back,
    What do you thik of the ACTIVE bodys?

    Looking forward for your comments
    B4 and Active Body is aggressive body.

    these bodie is faster in corner-in than Sturatus 3.1

    i used them in Technical Circuit.

    and i used Sturatus 3.1 in long high-way circuit.

    i choose Sturatus 3.1 in 2007 FEMCA

Similar Threads