Serpent Cobra GT - Failsafe malfunction
 

Hello everyone,

I wanted to know how to set the failsafe of the Cobra GT. The bind button on the receiver works but the failsafe doesn't. If I push it with a screwdriver, nothing happens. Oddly there is no button inside for the failsafe. It's just empty. Did I break it somehow with the screwdriver?

Thanks,

PS: Yes I read the manual

I'm guessing this is the RTR model? If so Im not aware that there is a fail safe equipped reciever in it. If the button is not there since you had the car then you'll probably need to upgrade the receive. This is just a guess as I don't have the RTR version of the car.

Yes RTR but
 

Yes it's the RTR nitro model. But the receiver only has a little button called "bind" and the failsafe button is missing. Is this normal?

I mean, there's a little button for the bind on the receiver, but there's nothing to push the failsafe button. It's an empty little hole.

PS: Image 1: www"dropbox.com/s/srnkcsibho2poip/DSC_0156.jpg?dl=0
PS: Image 2: www"dropbox.com/s/51thwdjrf3irdhp/DSC_0158.jpg?dl=0

Replace " with .

Already the name of the post is misleading.

How can something that is not even there create a "malfunction" ?

Best guess that should be renamed or closed to prevent creation of further rumors.

All RTR's radio don't have Failsafe on them. Higher Radio system like Toshiba and Airtronics, either has there own, or you purchase a add-on failsafe for $20. Higher Radio TX's has audio warning,enough to stop your model by your decision Failsafe is always an option.