Serpent 960....
03-16-2007, 05:51 PM
#2041
Originally Posted by Winner's Circle
I tried the set-up that Michael Salven ran at the Florida Winternationals and I definitely had more steering. In fact I had too much steering. This set up uses the wide offset steering blocks and they are installed right on the left side and left on the right side. I appears to minimize camber change when steering. I ended up having to switch the red rear for yellow rear and that got the rear more planted. Stiffening the rear bar to the hardest position also helped. By the end of the day I was very satisfied with the balance and handling of the car.
03-16-2007, 09:49 PM
#2043
Originally Posted by Greg M
The closest 960 to me is a 2-3 hour flight. I guess I will suss it out in a few weeks at the Nationals, otherwise I'll try and borrow a camera during the week. I'm the only Serpent 960 in Mugen country and dam its good when you beat them
03-16-2007, 09:56 PM
#2044
I know a few Kiwi's are planning on going to the Queensland titles in August. I wouldn't mind going, but all comes down to money. I've raced at Brendale before at the Pre-Worlds, so would like to go back and take the 960 this time. Our only big meeting is the Nationals and that is every Easter, and at my home track next year. I'd really like to have a run at Moorebank at some stage, maybe next year.
03-18-2007, 06:15 PM
#2045
Serpent and Maxy's Fuel (Make Clean Sweep) - Florida State Race in
Port Charlotte!!!!!!!
Congrats Danny (sedan) and Paolo (1/8)
Port Charlotte!!!!!!!
Congrats Danny (sedan) and Paolo (1/8)
03-18-2007, 06:49 PM
#2046
Tech Fanatic
1/8 Scale Pre WC Argentina
We are very happy to report that Mark Green just won the Pre-WC with his Serpent 960.
Congrats to Mark Green and his mechanic Rafael Angulo for their excellent performance. Way to go guys
We are very happy to report that Mark Green just won the Pre-WC with his Serpent 960.
Congrats to Mark Green and his mechanic Rafael Angulo for their excellent performance. Way to go guys
03-18-2007, 06:55 PM
#2047
Originally Posted by Paolo M
1/8 Scale Pre WC Argentina
We are very happy to report that Mark Green just won the Pre-WC with his Serpent 960.
Congrats to Mark Green and his mechanic Rafael Angulo for their excellent performance. Way to go guys
We are very happy to report that Mark Green just won the Pre-WC with his Serpent 960.
Congrats to Mark Green and his mechanic Rafael Angulo for their excellent performance. Way to go guys
03-18-2007, 08:54 PM
#2049
Awesome awesome awesome!
03-18-2007, 09:40 PM
#2050
Originally Posted by Paolo M
1/8 Scale Pre WC Argentina
We are very happy to report that Mark Green just won the Pre-WC with his Serpent 960.
Congrats to Mark Green and his mechanic Rafael Angulo for their excellent performance. Way to go guys
We are very happy to report that Mark Green just won the Pre-WC with his Serpent 960.
Congrats to Mark Green and his mechanic Rafael Angulo for their excellent performance. Way to go guys
03-19-2007, 06:05 AM
#2053
Originally Posted by dj apolaro
Serpent and Maxy's Fuel (Make Clean Sweep) - Florida State Race in
Port Charlotte!!!!!!!
Congrats Danny (sedan) and Paolo (1/8)
Port Charlotte!!!!!!!
Congrats Danny (sedan) and Paolo (1/8)
03-19-2007, 06:09 AM
#2054
Originally Posted by Paolo M
1/8 Scale Pre WC Argentina
We are very happy to report that Mark Green just won the Pre-WC with his Serpent 960.
Congrats to Mark Green and his mechanic Rafael Angulo for their excellent performance. Way to go guys
We are very happy to report that Mark Green just won the Pre-WC with his Serpent 960.
Congrats to Mark Green and his mechanic Rafael Angulo for their excellent performance. Way to go guys
03-19-2007, 06:57 AM
#2055
uneven body mount
Greg,
the upper shock mount is blocking the view, but if the upper arm's inner pin position wasn't symmetric, then the mount would be uneven.
i would think the upper camber adjustment would also be uneven but i can''t see from the picture
the upper shock mount is blocking the view, but if the upper arm's inner pin position wasn't symmetric, then the mount would be uneven.
i would think the upper camber adjustment would also be uneven but i can''t see from the picture