Mugen MTX-3

You're on Page 996 of 1150
Go to
  • YES!!!!!!!!!!!
    Quote:
    Originally posted by Aaron_ETF
    Robbie,

    I am new, just a quick question, I am wondering if you guys (Pro Driver) using brake? Coz I heard just some they don't use brake, what is the truth?

    I was driving next to Hara at the Nats last year. we were the same speed down the straight, when we got to turn 1, I coasted in and he used the brakes hard! He pulled 10 cars thru the corner because of that. I discovered if you run on a track with lots of grip (traction rolling grip) you can use a lot of brakes.
  • Re: YES!!!!!!!!!!!
    But isn't make the car spin if we use lot of brake?

    Sincerely,

    Quote:
    Originally posted by Slotmachine
    I was driving next to Hara at the Nats last year. we were the same speed down the straight, when we got to turn 1, I coasted in and he used the brakes hard! He pulled 10 cars thru the corner because of that. I discovered if you run on a track with lots of grip (traction rolling grip) you can use a lot of brakes.
  • Yeah..... heavy braking could spin out the car, so you have to test it before racing / playing.

    Front one way setup: You can adjust Brake EPA ( end point adjustment ) to limit the brake travel from transmitter. The braking power will be softer but you won't spin.

    Front ball diff : You can use harder braking power and the car remain stable. The car could spin out if four tires are lock up completely.
  • Thanks robbie for the info.
  • brakes
    I try to cut 2 degrees into the rear tyers when I true them, You know that dixie cup effect, It helps you stay stable on breaking HAYWYRE
  • MTX 4
    hi guys
    i was not here for a while so please excuse me if i am being repetative or if this question was answered previously. I would like to know if anyone (prehaps Robbie C. ) know when MTX-4 comes out. anyone got any pre release pics??
    thanks
  • Re: Re: spool
    Who sells this?

    -Rich

    Quote:
    Originally posted by ROBBIE C
    Kawahara (K781) works great on tight parking lot tracks.
  • RobbieC,
    Who is the distributor for Kawahara parts? Thanks.
  • Mugen is the US distributor for Kawahara
  • Re: MTX 4
    Quote:
    Originally posted by brooklynrc
    hi guys
    i was not here for a while so please excuse me if i am being repetative or if this question was answered previously. I would like to know if anyone (prehaps Robbie C. ) know when MTX-4 comes out. anyone got any pre release pics??
    thanks
    Mid-summer. No cad drawing have been released as of yet. Once they come out (cad drawings) it is usually only a month or two before the car arrives to us (local shops).

    I understand it is a new car and not a MTX3.5. I can't wait.

    MUGEN ROCKS!!!!!!!
  • I cannot seem to find the Kawahara front spool available off of the Mugenracing.com store?

    -Rich
  • Check e-bay. I used a 3-racing one for ever. No problem yet. Cheap too.
  • I just searched ebay and also did some google searches. I cannot find the Kawahara nor the 3-racing one. I found plenty of spools for other cars, tho (such as the HPI).
  • here are the links

    http://www.3racing.com.hk/

    l dont know about KAWAHARA there link dont work any more

    Thanks

    Dot Com
  • Hello
    Hello,

    I just want to say hi to all of you guys. I just purchased a MTX-3 prospec kit and have finished builting it. Please see below for some pictures. [IMG][/IMG] [IMG][/IMG] [IMG][/IMG]

    For the engine & pipe, I am using RB V15 Rody modified & RB inline tuned pipe.

    Right now I am having a little problem with this car... I already made quite a few runs and I am still having a little drag from the belts. I tried soaking them with WD40 but that didn't work so I don't know what to do next... All my other cars will loosen up after few runs... Does this car suppose to have some drag from the belts? Thank you.

Similar Threads