|
whoah
NVM what I said It was a late nighter!!! I thought I started my own thread:rolleyes: anywho...
|
Re: YIKES!!!
Originally posted by FREAKAH Ya' got Loosi XXX-S shocks on there! Did it come with the original shocks? Hopefully cause to get the same setups from other MTX-3 drivers you would need the stock shocks. But then again, if it works good with the Loosi shocks and you have a good understanding of car set-ups then leave 'um on. Excellent deal though :nod: ! I replied to your situation. :confused: |
Hey SMG, it's good to see you at the boards again! We're gonna miss your firery personalty around here (the track).
I've gotten a MRX3, it's a blast to drive after so long with the TC's. I know of a couple that are cheap, if you want to keep up with, or blow the doors off the local guys there. I was really sorry about your bad luck at the 'Bowl, before you left, we have had to repair that section of wall, as it's happened to others, me included.:mad: I didn't hurt the engine but ripped the corner off the car. YEAH ! where is Corse-R ! Haven't seen him around here in a long time! |
Originally posted by gonzoY5 I bought the same TX when I got my car. The only bad thing is those servos wont last too long, especially in the steering after a few hits. It'll work fine for the throttle but it is a little low on torque so the brakes are a little week. Other than that you're set. Good luck |
more comments pls..
everyone give more comments pliss..
|
Data... The force be with you... Opps.. That's Star Wars, not Star Trak... Hehe... Missed you and eddiethefish at the track
today... Are you going to make it to the club race tomorrow??? Hope to see you all soon... Oh, guess what I'm driving now??? RC_Alan |
Originally posted by rc_alan Data... The force be with you... Opps.. That's Star Wars, not Star Trek... Hehe... Missed you and eddiethefish at the track today... Are you going to make it to the club race tomorrow??? Hope to see you all soon... i will be there this saturday and/or sunday. how was the race sunday ? Oh, guess what I'm driving now??? |
Hello guys...
Any of you ever tryed those Conical manifolds? What brands? I'm planning to get the NovaMega one but the entry part seems to be a lot thin by the picture... Anyone got experience with those? thanks in advance... |
braking issues...
Ive got a one-way, and under braking my car spins out. Is it caus' the one-way has no front braking? Thats my guess... If I lower my brake travel to 2% it stops spinnimg, but keeps on going:rolleyes: Im trying my anti-lock feature but that doesnt help much...
|
Re: braking issues...
Originally posted by KV 305 8451 Ive got a one-way, and under braking my car spins out. Is it caus' the one-way has no front braking? Thats my guess... If I lower my brake travel to 2% it stops spinnimg, but keeps on going:rolleyes: Im trying my anti-lock feature but that doesnt help much... |
The fish is still on sushi hunt. Having fun overthere :) :) :) :)
Originally posted by Data close enough...... live long and prosper :p the punk fish is out on sushi hunt and won't be back til next month, we can enjoy a hack free track for a couple more weeks. i will be there this saturday and/or sunday. how was the race sunday ? i guess you don't like the new steering block on the G4. |
Re: Re: braking issues...
Originally posted by doki_doki bro...it's hard to use the brake when using one-way up front. what you need to do is try to set-up the brakes that it's enough to slow down the car and not lock up the rear wheels. when the rear wheels lock up, your car spins out... |
may be getting out of RC
I am going to be selling my RC stuff,
if you guys are interested in an item let me know, Prospec with NS3 (3 months old, ) not raced much Fut digital servos S9451 steering and low profile digital for throttle Helios EX10 Starter box hudy tools and team lossi tools (they look new) Huddy setup system Thanks ! |
Re: may be getting out of RC
Originally posted by Profoxcg I am going to be selling my RC stuff, if you guys are interested in an item let me know, Prospec with NS3 (3 months old, ) not raced much Fut digital servos S9451 steering and low profile digital for throttle Helios EX10 Starter box hudy tools and team lossi tools (they look new) Huddy setup system Thanks ! |
Originally posted by afm Patrick Well, I had a fairly good race yesterday. I made a 5th place overall considering I had some trouble with my transponder failing erraticly on the final. The Mugen pipe worked well, it gave me more top end than the other pipes, but i think I should've geared my car differently to keep pace of the leaders. Overall it is a very complete pipe, definetly worth the investment. The other driver on the track with a Sirio engine had an RD Logics Turbo II pipe, and I outruned him on the main straight permanently, and kept a 5 car lead on him during the total final heat. Ciao Alfonso |
| All times are GMT -7. It is currently 07:40 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.