Nitro Trans Am & Nitro GT Invades So Cal
 

NITRO TRANS AM STOCK RULES

1. ANY 4WD NITRO CHASSIS KIT OR RTR (must retail for under $400.00)

2. HPI VINTAGE TA BODIES ONLY. The bodies must be painted to depicted full out race cars. (other company bodies will be added to the list shortly)

3.HPI VINTAGE WHEELS AND TIRES ONLY (stock insert must be used)

4. RTR CARS MUST USE THE FACTORY INSTALLED ENGINE (if you happen to blow your engine you must replace it with the same type of engine or you may replace it with a .12 engine (must retail for under $160.00)

Addendum's to come shorty.


NITRO TRANS AM OPEN

1. Any 4WD Nitro Chassis

2. Any .12 Engine

3. Only HPI Racing Vintage Wheels & Tires

4. Only Outlaw Trans Am Vintage Body


STOCK NITRO GT

1. ANY 4WD NITRO CHASSIS KIT OR RTR (must retail for under $400.00)

2. Any 200mm HPI RACING Two Door GT Type Bodies. The bodies must be painted to depicted full out race cars. (other company bodies will be added shortly)

3. Any 26mm Rubber Tire may be used. Must also use racing spoke wheels, NO DISH WHEELS PLEASE.

4. RTR CARS MUST USE THE FACTORY INSTALLED ENGINE (if you happen to blow your engine you must replace it with the same type of engine or you may replace it with a .12 engine (must retail for under $160.00)

Addendum's to come shorty.


Nitro GT Open Rules

1. Any 4WD Nitro Chassis

2. Any .12 Engine

3. Any 26mm Rubber Tire may be used. Must also use racing spoke wheels, NO DISH WHEELS PLEASE.


4. Only HPI RACING 200mm Two Door GT Type Bodies. The bodies must be painted to depicted full out race cars. (other company bodies will be added shortly)

http://image.motortrend.com/f/motors...2-race-car.jpg
http://www.hpiracing.com/graphics/ki...05936_side.jpg

Why you gonna make me do nitro? C'mon man!

Dood you personify Nitro. You are the Vulgar Display Of Power.

What you doin up so late bro? We need to be racin our flashlight battery Outlaw Trans Ams in a couple hours @ West Coast RC. Gotta keep reppin the muscle cars ya know

OH MAN!!! Wish I was in Cali! Maybe I can get this going around here!

NitroVTA
 

Mitch- I have the necessary parts to make this happen. NTC3, Old RB motor, VTA tires and body. I might throw it together just for grins...Race ya soon!

I have a blinged out Nitro RS4 Racer and HB .12 engine. I will try to get it together with VTA stuff for the next time we meet!

Good idea...This class is lots of fun.

Do it, I doubt you'll regret it.
Where are you?

I'm in SE Wisconsin. Kenosha

dont make me not sell my ntc3 stuff

A few options.
 

HPI Nitro RS4 3 EVO+ RTR w/BMW M3 Body & 2.4GHz Radio
[HPI105936] Low Price: $379.99
http://www.hpiracing.com/graphics/ki...05936_side.jpg
http://www.hpiracing.com/graphics/bodies/7452_01m.jpg



http://www.hpiracing.com/graphics/ki...s_callouts.jpg
http://www.hpiracing.com/graphics/ki...05940_side.jpg

Team Magic G4JR 1/10 RTR Nitro Touring Car w/H.A.R.D. 2.4GHz Radio
[TMA502088] Low Price: $337.99
http://cdnimages.amainhobbies.com/im...ma502088_1.jpghttp://cdnimages.amainhobbies.com/im...ma502088_4.jpghttp://cdnimages.amainhobbies.com/im...ma502088_5.jpghttp://cdnimages.amainhobbies.com/im...ma502088_2.jpghttp://cdnimages.amainhobbies.com/im...ma502088_3.jpghttp://cdnimages.amainhobbies.com/im...ma502088_6.jpg

dude id totally be down for rubber tire spec nitro... never happen here though. =(

Dude you'd be surprised by how well these cars work on rubber tires.

Subscribing! We can make it happen in Portage / Hobbytown LITH summer on road.. I will have my Nitro RS4 ready.. I think we have to use the 200mm/210mm HPI trans am bodies because of the wider rear rim offset of the VTA rims?

The HPI Wheels and tires fit great under all HPI 200mm bodies and work well on most 200mm nitro chassis's.
Rear's #4797 Vintage Racing Tire 31mm D-Compound
http://www.hpiracing.com/graphics/pa...7/3815_04m.jpg
Front's #4793 Vintage Racing Tire 26mm D-Compound
http://www.hpiracing.com/graphics/pa...3/3815_04m.jpg