SMELTZ Modified Motors
#151
Tech Apprentice
Port a .21 for me?
anyone care to refer me to someone who can "clean up" the insides of a brand new Hyper .21 8 port for me e-mail me @
[email protected]
[email protected]
#152
Tech Elite
Originally posted by SmeltzRacing
I modify .12, .15, and .21 motors of all kinds. .12 3 port Roar Legal is $85, .12 5 port is $100, all .15 and .21 motors are $100 each. If you are interested email me at [email protected] and I can supply more info for you.
Matt
I modify .12, .15, and .21 motors of all kinds. .12 3 port Roar Legal is $85, .12 5 port is $100, all .15 and .21 motors are $100 each. If you are interested email me at [email protected] and I can supply more info for you.
Matt
E-mailed you.
#153
So how does the roar legal sirio 3 port run compaired to a rtu i need killer topend and low end grunt
Last edited by nova racer; 11-30-2002 at 06:40 PM.
#154
Tech Apprentice
sirio .12 "legal" engine
I am starting to build up some disrespect for these sirio engines. . need some pychological help
1.8hp ?
*ARE YOU SURE*
all this numbers tell me they're more marketing people than honest businessman. . .
I saw a couple run at our Jurong Track and they seem not as quick as claimed . . again . . . 1.8hp . . . .
what are your experiences. . . ??
ed
1.8hp ?
*ARE YOU SURE*
all this numbers tell me they're more marketing people than honest businessman. . .
I saw a couple run at our Jurong Track and they seem not as quick as claimed . . again . . . 1.8hp . . . .
what are your experiences. . . ??
ed
#155
The Sirio used by the factory drivers are putting out around 1.8hp but keep in mind that these engines may only last for about 5mins for a qualifier.
The production engine will never see that type of HP without major mods. I would estimate they are producing around 1.35HP which would bring them into line with all the other legal 3-port standard engines.
The production engine will never see that type of HP without major mods. I would estimate they are producing around 1.35HP which would bring them into line with all the other legal 3-port standard engines.
#156
Re: sirio .12 "legal" engine
Originally posted by racerchan
I am starting to build up some disrespect for these sirio engines. . need some pychological help
I saw a couple run at our Jurong Track and they seem not as quick as claimed . . again . . . 1.8hp . . . .
I am starting to build up some disrespect for these sirio engines. . need some pychological help
I saw a couple run at our Jurong Track and they seem not as quick as claimed . . again . . . 1.8hp . . . .
Compared to my JP 12, my Sirio is 0.02 sec slower on my track, maybe it not have those wicked sound at high rpms, but things go pretty fast. Well, my NTC3 with the JP sounds better, but is quite expensive to run on practice and local races, better I stick with the Sirio, JP is reserved for serious races where HP is needed.
I've disasembled it and for not being a 'ported engine' is pretty fast, for sure that some porting helps a lot, but for their price is very, very good.
#157
Modified Sirio is slower than a JP MT-12? Wow! That's not good. Dennis Richey's RTUs were running right past JPs.
#158
Originally posted by rod_b
Modified Sirio is slower than a JP MT-12? Wow! That's not good. Dennis Richey's RTUs were running right past JPs.
Modified Sirio is slower than a JP MT-12? Wow! That's not good. Dennis Richey's RTUs were running right past JPs.
#159
at our local track there are number of moters I have a gen two riche that was the fastest moter at the track it finaly blew up at our regional race 8.5 gallons later i was very happy I bought a gen 3 at cinci broke it in on serpant bench I have not run the moter yet but i have a mod pixxi and i just got a mod siro from pinapple moters the guy who mods the moters runs at our local track some times his siro mod is so fast every body wants one. my point his siro is very fast he showed me the piston and sleve and crank. it looks a lot like smeltz or riche mpters they all look simular. I think for 8.5 gallons of fuel through Amod moter is good so the extra money for a mod moter is worthit. just my thoughts.
#160
Tech Apprentice
Originally posted by modellor
The Sirio used by the factory drivers are putting out around 1.8hp but keep in mind that these engines may only last for about 5mins for a qualifier.
The production engine will never see that type of HP without major mods. I would estimate they are producing around 1.35HP which would bring them into line with all the other legal 3-port standard engines.
The Sirio used by the factory drivers are putting out around 1.8hp but keep in mind that these engines may only last for about 5mins for a qualifier.
The production engine will never see that type of HP without major mods. I would estimate they are producing around 1.35HP which would bring them into line with all the other legal 3-port standard engines.
Even so . . . sirio does not have to market their normal production as 1.8hp (misleading ?? - as you can almost find this info everywhere . . not to mention the next model - turbo one having 2hp).
ed
#161
Please note that I said around. I would say 1.7 would be closer. Most works drivers get all engines handed to them free and these have been tested to prove that they rev probably around 3 times as fast as the production engine.
#162
Wow! That would be 90000 RPMs. Wish I was a factory driver
#163
Sorry. I hit the 3 key instead of the 2 key. I was in a hurry to get my dinner. They will rev around twice as fast.
#164
Tech Apprentice
Even 2 times isn't even close lol.