Kyosho Inferno GT, GT2 Race Spec
#1426
Tech Adept
Yeah it seems the GT8's eat up tires alot. I run it on the track just for fun so I switched it out to 55 shores and it's holding up great even after whole day. They don't stick nowhere close to 40 or 45 but 55 lasts 10 times longer.
I will never buy 40 shores !! They lasted 10 minutes!
I will never buy 40 shores !! They lasted 10 minutes!
https://www.google.gr/url?sa=t&rct=j...13943164,d.bGs
you can find both of them also at ebay
#1427
Tech Adept
https://www.google.gr/url?sa=t&rct=j...13943164,d.bGs
https://www.google.gr/url?sa=t&rct=j...13943164,d.bGs
you can find both of them also at ebay
https://www.google.gr/url?sa=t&rct=j...13943164,d.bGs
you can find both of them also at ebay
#1428
Tech Adept
sp tyres are not like grp in quality ,,,its a cheap solution but still good for bashing or for practice in high grip tracks...they have some different choices like hard and shoft or like medium ,,,,with sp hards i managed 3 months of game, not every day, i mean for the week ends
#1429
Tech Apprentice
Help with evolva clutchbell
Hello i bought the evolva 2005 bell 15t/19t. How do i instal it on a gt2? It seems that the bell's inner diameter it bigger. What will i need to use the evolva gears?
#1430
Tech Adept
if you bought the kyo vs 058 bell you can use also the evolva gears and also upgrade from 15-19 to 16-20 and 17-21 gear set up----all gears from evolva the codes are like kyo fm 540-17 for the first gear and kyofm 541-21 for second ,,,,.for the kyo vs 058 bell you will need bigger bearings 12-5-4..............12mm outer diameter 5mm inside diameter and 4 mm fat-width
#1431
Tech Adept
as far as i can see and remember at the kyo vs o58 bell the back bearing is the big one 12-5-4 and the front is the normal one that you have allready with 10mm outer diameter
#1432
Tech Apprentice
Thanks guys.
Where do i find that size? Im trying to search 12x5x4 bearings and i cant find it.
Where do i find that size? Im trying to search 12x5x4 bearings and i cant find it.
#1433
Tech Adept
#1434
Tech Apprentice
#1435
Tech Adept
#1436
Tech Adept
#1437
Tech Apprentice
What am i doing wrong? The gears from evolva dont line up with the tranny....they also dont mesh with the tranny.
#1439
Tech Apprentice
#1440
Tech Adept
its not a thin shim you need a washer ,from copper or alouminioum ,there are out there industrial washers .its not something that you find in hobby shops but iat industrial tools ,thera are litle washer kits according to the dimensions that we are using,ofcourse after adjusting you will put also thread locker