velox v10
#1
velox v10
whats up with the thread on this car i notice not much talk on rc tech whats the problem here in the states is it support issues or what ? i have one and thinking of fully upgrading to v10 11 and buy another for back up lets gets the thread going again.
#2
Racing season is just now getting started in most places. I will be running my V10 eleven next week at the Motonica GP in LA. I will let you know how it goes after the race.
#3
Tech Elite
iTrader: (11)
Not much talk at all unless you have the latest and greatest with the Capricorn LAB-C02 or the Mugen MTX5.
I have two almost complete Shepherd's and was keen to run them, blew a clutch bearing across the kitchen as it was stuck on the thrust bearing retainer... that was the end of that!
Just don't things for heavy handed ozzy blokes, if it needs fixing we just get a bigger and heavier hammer!
Andrew
I have two almost complete Shepherd's and was keen to run them, blew a clutch bearing across the kitchen as it was stuck on the thrust bearing retainer... that was the end of that!
Just don't things for heavy handed ozzy blokes, if it needs fixing we just get a bigger and heavier hammer!
Andrew
#4
Tech Initiate
Hey guys,
sometimes no news are good news. At least it seems there are not much problems with the car.
Our new distributor Greg Esser offers a great support to all Shepherd users in the US, make sure to check out his homepage for the latest info:
http://www.nuggetsranchraceway.com/
Additionally he will host the US nats this year on his track in Arcadia, FL, so good trackside support will be guarenteed.
If you have any questions or if you need technical adivse, feel free to post. From time to time I will check out this forum.
Best regards
Patrick Schäfer
sometimes no news are good news. At least it seems there are not much problems with the car.
Our new distributor Greg Esser offers a great support to all Shepherd users in the US, make sure to check out his homepage for the latest info:
http://www.nuggetsranchraceway.com/
Additionally he will host the US nats this year on his track in Arcadia, FL, so good trackside support will be guarenteed.
If you have any questions or if you need technical adivse, feel free to post. From time to time I will check out this forum.
Best regards
Patrick Schäfer
#6
V10
Ready to go..........
#8
NIB Velox V10 Eleven
Hi guys
i will not be running the car this year. if anyone is interested i have:
Everything is NEW
NEW, built v10 ELEVEN
SHP 506200 One-way/Solid front axle set
SHP 507302 Alloy Adjustable Servo Saver
SHP 508401 Receiver Box
2x p57 or p37 painted bodies (will have to look)
Klein tools C-clip tool needed for this car (like new)
send me a pm with your email and i can send picks
cheers
i will not be running the car this year. if anyone is interested i have:
Everything is NEW
NEW, built v10 ELEVEN
SHP 506200 One-way/Solid front axle set
SHP 507302 Alloy Adjustable Servo Saver
SHP 508401 Receiver Box
2x p57 or p37 painted bodies (will have to look)
Klein tools C-clip tool needed for this car (like new)
send me a pm with your email and i can send picks
cheers
#9
Tech Rookie
Any pics of the new rear roll bar?
#10
#11
Nice ..... is it ball raced? I can't tell from the photo
#12
Tech Regular
Hey guys,
sometimes no news are good news. At least it seems there are not much problems with the car.
Our new distributor Greg Esser offers a great support to all Shepherd users in the US, make sure to check out his homepage for the latest info:
http://www.nuggetsranchraceway.com/
Additionally he will host the US nats this year on his track in Arcadia, FL, so good trackside support will be guarenteed.
If you have any questions or if you need technical adivse, feel free to post. From time to time I will check out this forum.
Best regards
Patrick Schäfer
sometimes no news are good news. At least it seems there are not much problems with the car.
Our new distributor Greg Esser offers a great support to all Shepherd users in the US, make sure to check out his homepage for the latest info:
http://www.nuggetsranchraceway.com/
Additionally he will host the US nats this year on his track in Arcadia, FL, so good trackside support will be guarenteed.
If you have any questions or if you need technical adivse, feel free to post. From time to time I will check out this forum.
Best regards
Patrick Schäfer
The Shepherd car is a beautiful fun and fast racing car that is very well supported in the United States. Here on the west coast if it ever stops raining we will begin to race!!! lol