R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Nitro On-Road

Reply
 
Thread Tools Search this Thread
Old 02-27-2005, 04:32 AM   #211
Tech Initiate
 
Join Date: Feb 2005
Posts: 21
Engine Problem

Hi mga peeps,

Patulong naman sa engine settings. Kapag start ko kse yung GS15R ko na engine namamatay sya kapag tinatanggal ko na yung Glow starter. Ano ba dapat ang baguhin ko? Ang current neddle settings ko are:

HSN: 2 1/2 turns from close.
LSN: 2 turns from close.
Idle: Carb is 1 mm open.

Salamat.
Bushwalla is offline   Reply With Quote
Old 02-27-2005, 04:43 AM   #212
Tech Regular
 
Join Date: Apr 2004
Location: batang kalokohan! ay kaloocan pala!!diretso ka lang,pag nasaksak ka! bahay na namin yung sa harap!
Posts: 328
Send a message via AIM to kyoshoBOY
Default Re: Engine Problem

Quote:
Originally posted by Bushwalla
Hi mga peeps,

Patulong naman sa engine settings. Kapag start ko kse yung GS15R ko na engine namamatay sya kapag tinatanggal ko na yung Glow starter. Ano ba dapat ang baguhin ko? Ang current neddle settings ko are:

HSN: 2 1/2 turns from close.
LSN: 2 turns from close.
Idle: Carb is 1 mm open.

Salamat.
palitan mo muna ung glowplug mo and then start again.
kyoshoBOY is offline   Reply With Quote
Old 02-27-2005, 04:49 AM   #213
Tech Initiate
 
Join Date: Feb 2005
Posts: 21
Default Re: Re: Engine Problem

Quote:
Originally posted by kyoshoBOY
palitan mo muna ung glowplug mo and then start again.
Hi Kyoshoboy,

Salamat sa mabilis na pagsagot. Kapapalit ko lang ng glow plug. Ano pa kaya ang pwede kong baguhin?

Mabuhay.
Bushwalla is offline   Reply With Quote
Old 02-27-2005, 05:57 AM   #214
Tech Elite
 
rice's Avatar
 
Join Date: Apr 2003
Location: racing is my life
Posts: 2,501
Default

Bushwalla,

pahabol after changing the glow plug namatay pa ang engine try adjusting a little bit the "idle"
rice is offline   Reply With Quote
Old 02-27-2005, 06:10 AM   #215
Tech Initiate
 
Join Date: Feb 2005
Posts: 21
Default

Quote:
Originally posted by rice
Bushwalla,

pahabol after changing the glow plug namatay pa ang engine try adjusting a little bit the "idle"
Hi peeps,

Kinalas ko yung linkage...para madaling ayusin yung low end needle at idle needle. Di na namamatay yung engine kapag tinatanggal ko yung glow starter.

Ang problem ko naman eh di ko ma-idle yung car. Yung LSN is 1 1/2 turns from close. Tpos habang naka-set to neutral yung carb ina-adjust ko yung idle needle counter-clockwise (loosen) para sana makuha ko yung settings para mag-idle yung car. Pero umaandar pa din yung car (gears). Ano pa ba yung dapat kong i-adjust?

Salamat.
Bushwalla is offline   Reply With Quote
Old 02-27-2005, 06:35 AM   #216
Tech Elite
 
rice's Avatar
 
Join Date: Apr 2003
Location: racing is my life
Posts: 2,501
Default

Bushwalla,

by adjusting the idle needle from counter or cloclwse u can idle ur car or stop the gear from spining. dats the only thing u can do to dat prob. and also try checking ur linkage if its in neutral position "the carb is properly place or at idle position".
rice is offline   Reply With Quote
Old 02-27-2005, 07:05 AM   #217
Tech Adept
 
bulletdays's Avatar
 
Join Date: Dec 2004
Location: Dubai
Posts: 187
Default Dens!

Eto ok lang.

soft springs na gamit ko, tapos 10k n ang diff oil ko.

Un bang sinasabi mong porma ng shocks, di ba ung shock sa likod, may pinagkakabitan ng screw sa taas, bali 3 hole un ung una ang porma ng shocks upright sya, tapos ung huli medyo naka parang 70degree ung shocks.

dun ko nilagay ang shocks sa 70degree.

O ung tinutukoy mo ung nasa baba?, may 2 option dun kung up or down mo lalagay ung screw.

Alam dens konting dulas na lang talaga ang problema ko, kaya medyo pigil ako sa throttle, hindi ko maitodo tulad nung nakarubber ako. pag na solve na to, ok na,

nga pala ung engine ko ok na..

tnx sa yo!

more lap time speed!
bulletdays is offline   Reply With Quote
Old 02-27-2005, 08:24 AM   #218
Tech Master
 
dg8one's Avatar
 
Join Date: Jul 2002
Location: NELLYVILLE
Posts: 1,368
Default

bulletdays

pare subukan mung lagyan pa ng camber or bawasan mo ng droop suggest ko lang


nelly
__________________
Member of the CHEATERS CLUB
TEAM KAMIKAZE(MARYLAND CHAPTER)
TOKWA'T BABOY LTD
dg8one is offline   Reply With Quote
Old 02-27-2005, 09:09 AM   #219
Tech Initiate
 
Join Date: Feb 2005
Posts: 21
Default

Quote:
Originally posted by rice
Bushwalla,

by adjusting the idle needle from counter or cloclwse u can idle ur car or stop the gear from spining. dats the only thing u can do to dat prob. and also try checking ur linkage if its in neutral position "the carb is properly place or at idle position".
Thanks Rice, but i tried adjusting the idle screw by either clockwise or counter clockwise but the car (gears) is still not idle. I'm having a hard time on setting the car to idle. I just re-assebled my engine for cleaning and trying to start it for break-in. Hope you guys can help me.

HSN: 3 turns from close.
LSN: 2 turns from close.
Idle: 1 mm carb opening. I tried playing on the idle settings but still the car do not idle.

Thanks in advance!
Bushwalla is offline   Reply With Quote
Old 02-27-2005, 09:51 AM   #220
Tech Master
 
dg8one's Avatar
 
Join Date: Jul 2002
Location: NELLYVILLE
Posts: 1,368
Default

Bushwalla
recheck ure clutch engagement put some shim between the clutch adjustment and the inner bearing housing try that
__________________
Member of the CHEATERS CLUB
TEAM KAMIKAZE(MARYLAND CHAPTER)
TOKWA'T BABOY LTD
dg8one is offline   Reply With Quote
Old 02-27-2005, 08:24 PM   #221
Tech Initiate
 
Join Date: Feb 2005
Posts: 21
Default

Quote:
Originally posted by dg8one
Bushwalla
recheck ure clutch engagement put some shim between the clutch adjustment and the inner bearing housing try that
Thanks! I will try your advise tonight.
Bushwalla is offline   Reply With Quote
Old 02-27-2005, 10:21 PM   #222
Tech Adept
 
bulletdays's Avatar
 
Join Date: Dec 2004
Location: Dubai
Posts: 187
Default

Quote:
pare subukan mung lagyan pa ng camber or bawasan mo ng droop suggest ko lang
Nelly tnx pero ok na ung camber, cguro droop na lang. salamat
bulletdays is offline   Reply With Quote
Old 02-28-2005, 01:54 AM   #223
Tech Regular
 
Lowner_V1S's Avatar
 
Join Date: Nov 2003
Posts: 268
Trader Rating: 1 (100%+)
Send a message via Yahoo to Lowner_V1S
Default

Mga Kabayan,

Tanong ko lang kung Magkano yung Xray T1FK sa Pinas at san shop ang nagbebenta??..

Anong servo type ang gamit ninyo sa MTX 3?? High torque for steering ano ang recomend ninyo??

Salamat!
Lowner_V1S is offline   Reply With Quote
Old 02-28-2005, 04:10 PM   #224
Tech Master
 
dg8one's Avatar
 
Join Date: Jul 2002
Location: NELLYVILLE
Posts: 1,368
Default

ok lang yung kabayan


sino ba dito sa inyo ang pupunta sa national sa texas
__________________
Member of the CHEATERS CLUB
TEAM KAMIKAZE(MARYLAND CHAPTER)
TOKWA'T BABOY LTD
dg8one is offline   Reply With Quote
Old 02-28-2005, 05:22 PM   #225
Tech Regular
 
serpentpro28's Avatar
 
Join Date: Aug 2002
Location: VA
Posts: 299
Default

Quote:
Originally posted by dg8one
ok lang yung kabayan


sino ba dito sa inyo ang pupunta sa national sa texas
mag umpisa ka ng mag practice para manalo ka naman
__________________
Team bilis racing
serpentpro28 is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Think Rich Pinoy Seminar in Singapore! March 29, Saturday. Get your seats! jultradust R/C Items: Wanted to Buy 0 03-05-2008 11:05 AM
Think Rich Pinoy Seminar in Singapore! March 29,Saturday. Get your seats! jultradust Singapore R/C Racers 0 02-29-2008 03:29 AM
HELP NON RACERS HELP MORE THAN RACERS SO WAKE UP ALL YOU OFF ROAD RACERS IN MELB/VIC richard 1000 Australian Racing 15 06-20-2006 11:35 PM
By The Racers For The Racers..July 12 Hobbytown Glen Burnie pusher Racing Forum 2 07-07-2003 02:08 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 11:07 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net