Originally Posted by dflat57

What is the price?? Where to buy?? Are installation instructions included??

Originally Posted by Pit-racer

Would that be 4 braces for F/R or 2 just for front? Also those bodies on your site are sweet, would they fit the Cobra GT?

Originally Posted by MantisWorx

Front and rear, complete set with hardware. Unfortunately all of those bodies are for long chassis

Originally Posted by Pit-racer

You need to come up with some sort of body shrinker. So they fit the K car igt2.

Originally Posted by MantisWorx

They will be available at RCShox.com within the next few days. the braces are 25.00, there will be pictures for install on the site, its very straight forward, drill 8 3/32 holes and screw in!!

Originally Posted by MantisWorx

We designed some braces that fill the void between the full LRP braces for high grip and no braces for low grip. If you are not running the braces now take a straight edge and look how bent your arms are!! This is because the arms are made for offroad. Soft arms create better grip when traction is low but as traction goes up they deflect more and the braces do their job. These new braces allow for arm flex but keep the arms straight at the same time so for low to med grip they are optimal!



For those of you that want to run the new Serpent body (maclaren) the stock rear body mount sits too far back and right under the wing post. So we designed a body mount extender that puts the post in front of the shocks.



Lastly, the 2 stage pistons have been redesigned specifically for on road now. The material has a higher percentage of Teflon in it so they are super smooth and the rebound and vent holes are now larger which give them even quicker rebound and quicker reaction. On the track this translates to a car that will transition laterally and longitudinally quicker. the last version were 8 holes 1.3 compression 1.4 rebound, the new ones are 4 holes 1.5 compression and 1.8 rebound. Andy Lui can chime in on how they worked for him!
Pistons are available now the braces and mounts will be ready next week! thanks guys

Originally Posted by 1966ss

Going to be selling my cobra gt. Never see any for sale for I don't know what it's worth. Here's the deal on

Purchased march 2013.
3 races. About 5 gallons
Car is mint. Never crashed or bashed
0* aluminum front hubs
Aluminum 2speed holder
Aluminum servo horns
Hard servo saver spring
Lightweight wheel nuts
Black and white springs

Car works.

Thanks

Originally Posted by MantisWorx

They will be available at RCShox.com within the next few days. the braces are 25.00, there will be pictures for install on the site, its very straight forward, drill 8 3/32 holes and screw in!!

Originally Posted by Team STPN

I want to order these braces. I don't see it on the site. Can you help me on this??

Originally Posted by Robert R

built my car last week went out to race in LA had few issue with it pushing, I only have it stock right now, so not sure if its springs or tires? I was running soft all way around. any advise would be great.

Originally Posted by MantisWorx

Cobra Mini braces are now available! Well i have a few sets ready to go now and more ready to ship out by friday.
RCShox.com