Victor Vector

iTrader: (9)

............Phhhhhhhhtttttttttzzzzzz.............. .

border r/c

Hi Guys,
just finished my Cobra Gt and did a test run on the MACH worlds track in Heemstede.
better know as the Snack test track
body set is a pfgt8 other body's available from us!!


http://www.youtube.com/watch?v=WiM3-y1-PmA&hd=1

d OG black flag

What is name of the body being used in the video for testing cobra 811 gt-e? It is the same body that is being use for advertising serpent cobra Gt in pictures and on the box. Can it be purchase?

thanks

Serpent-Dan

iTrader: (18)

That's the Protoform body

manny021803

iTrader: (2)

YOU GUYS ARE WELCOME TO NEW YORK
2nd Annual GT8 Championship

Date: Practice on Sep/1/2012 Saturday. Race on Sep/2/2012 Sunday.
Place: Floyd Bennet Filed. Brooklyn, NY
Class & Fee : GT8 Expert ($30), GT8 Sportsman ($15)



General Rule:
New for 2012! ONLY a Offroad Engine up to .28
New for 2012! Any Off road Shoe Style Clutch system is allowed
No multiple class entrees allowed
Minimum weight 3.5Kg
Any Rubber tires allowed
Fail safe, carburetor return spring is mandatory item.
2 Bump ups

Sponsors in alphabetical order:
Bruckner Hobbies
Buku Power
GMK Supply
Serpent
Sweep Racing Tires
Team C America
More coming up! we had so much GT related prizes last year. EVERY ONE walked away with gifts!
Expert GT8 Drivers attending for this Year:
Rob Bendall (2011 GT8 TQ)
Roland Shao (2011 GT8 Champion)
Tony Q (2011 Tri-state Champion)
Andy Liu (Top Racer from Texas)
Gus Wood (Top racer from Utah)
More coming up!
The Official flyers and detail rules coming up soon. check this 1st post for updates


__________________
SweepRacingUSA.com




Official tires for:
2012 North East Cash for Dash.
2012 Midwest Grand Slam.
2011 Motorama TQ&Won Truggy Sportsman.
2011 US Indoor championship.
2011 Rosecity GP.
2011 SPEC tires 1/8th GT Class TimeZone. Battle Ground, WA.
2011 X-Ray Challenges by RC America.
2011 Floyd Bennett Field, Brooklyn, NY.
2011 Coliseum @ Hobbytown Frederick, VA.
2011 ROAR regional championships.
More to come, here in the U.S.
Last edited by SweepRacingUSA; Yesterday at 06:01 PM.

Victor Vector

iTrader: (9)

What starter box works on Cobra GT ??

Victor Vector

iTrader: (9)

Answer: MINE !!

not too much violence and I have a running chassis.

What a lovely little car..............

Jacko

teeforb

iTrader: (94)

is there a conversion kit from buggy to gt?

*1speedy

iTrader: (12)

I built 2 of them for friends and the both had ofna bump boxes.

1 was the ofna chrome top OFN10253 and the other was the ofna OFN10244. They both worked fine

Any Buggy based starter box should do it.

Is your Engine new and the pinch is to tight? Get a heat gun

Or maybe your rubber starting wheel is to worn? get a new 1

Maybe your battery doesnt have the amps to turn the engine.

Good Luck


Maybe just put some hair around that hole and PUSH

See you Next Week

rave1010hk

My 811 GTe

Team Kamikaze

iTrader: (3)

Carlton, I got those body!

mrod

iTrader: (4)

Hi there I just got my cobra gt built and noticed that the flywheel is only about a 32 mm vs 34 like on my ofna. My starter box just will not work on this car, which starter boxes are people using, I have a blue ofna box and like I said it just doesn't work. Any suggestions.
Thanks

triple7s

iTrader: (4)

I'm using the blue OFNA box too. Works fine, but I had to pull the motor out and check the alignment. Also have to have the piston BDC when cold.

Victor Vector

iTrader: (9)

Just to add to Triple 7 comment..........I've just been thru the same snag. I noticed the flywheel isn't in the centre of the bump hole (that doesn't sound right !), so I marked centre of fly wheel andf them lined the wheel on the box to it. I did take a grinder to bevel the edges of the hole in the chassis ( some one also posted that my wheel might be worn and too small)

Anyway, that cured my problem..............

Jacko

And yes, an Ofna box too.

mrod

iTrader: (4)

thanks guys, I fiddled with the box last night I finally got it to work, it took a little bit of readjusting but it now works. Thanks for the input.