centax clutch reflex nt
09-26-2004, 11:58 AM
#1
centax clutch reflex nt
HiĦĦĦ
I have a reflex nt and i want a centax clutch but i can´t find it..
Where can i find it cheap and do you know if ic an use another centax brand..
Thank you
I have a reflex nt and i want a centax clutch but i can´t find it..
Where can i find it cheap and do you know if ic an use another centax brand..
Thank you
09-26-2004, 08:47 PM
#2
Please try K Factory.
K1146 Push Type Clutch Set (V-One-R)
K1146 Push Type Clutch Set (V-One-R)
09-27-2004, 07:31 AM
#3
The K-Factory one won't work for the reflex, because the pinions and spurs are spaced apart farther than the V-one.
Fenix, I have a Reflex centax for sale if you want. It's slightly used. I raced it twice, but it didn't line up with my V-one spurs. Let me check tonight to see if I have all the parts for it and I'll PM you. I'll give you a good deal on it if you wish.
Fenix, I have a Reflex centax for sale if you want. It's slightly used. I raced it twice, but it didn't line up with my V-one spurs. Let me check tonight to see if I have all the parts for it and I'll PM you. I'll give you a good deal on it if you wish.
09-27-2004, 11:03 AM
#4
Originally posted by kidDynomite
The K-Factory one won't work for the reflex, because the pinions and spurs are spaced apart farther than the V-one.
Fenix, I have a Reflex centax for sale if you want. It's slightly used. I raced it twice, but it didn't line up with my V-one spurs. Let me check tonight to see if I have all the parts for it and I'll PM you. I'll give you a good deal on it if you wish.
The K-Factory one won't work for the reflex, because the pinions and spurs are spaced apart farther than the V-one.
Fenix, I have a Reflex centax for sale if you want. It's slightly used. I raced it twice, but it didn't line up with my V-one spurs. Let me check tonight to see if I have all the parts for it and I'll PM you. I'll give you a good deal on it if you wish.
YesĦĦĦ
Please let me know if you can find it...
Thank you
09-28-2004, 07:51 AM
#5
Originally posted by fenix
YesĦĦĦ
Please let me know if you can find it...
Thank you
YesĦĦĦ
Please let me know if you can find it...
Thank you
Here's a pic. Let me know if you're still interested. I have all the parts, 2 bearings, shaft collet and a pretty new trust bearing. I also included the shims that I used when it was installed. You may need to + or - shims in order to find the right gapping (.3 to .5mm of play).
PM me your info and we'll work something out. Paypal would be fastest.
09-28-2004, 08:04 AM
#6
Originally posted by kidDynomite
fenix, found it!
Here's a pic. Let me know if you're still interested. I have all the parts, 2 bearings, shaft collet and a pretty new trust bearing. I also included the shims that I used when it was installed. You may need to + or - shims in order to find the right gapping (.3 to .5mm of play).
PM me your info and we'll work something out. Paypal would be fastest.
fenix, found it!
Here's a pic. Let me know if you're still interested. I have all the parts, 2 bearings, shaft collet and a pretty new trust bearing. I also included the shims that I used when it was installed. You may need to + or - shims in order to find the right gapping (.3 to .5mm of play).
PM me your info and we'll work something out. Paypal would be fastest.
Stop keep changing your user name.....I kept forgetting...
kidDynomite is a good guy to deal with.....A+
09-28-2004, 08:08 AM
#7
Originally posted by Rookie Solara
Hey, Tommy............I finally found out who you are......(just spot your FW05R on Sunday....)
Stop keep changing your user name.....I kept forgetting...
kidDynomite is a good guy to deal with.....A+
Hey, Tommy............I finally found out who you are......(just spot your FW05R on Sunday....)
Stop keep changing your user name.....I kept forgetting...
kidDynomite is a good guy to deal with.....A+
09-28-2004, 09:39 AM
#8
Originally posted by kidDynomite
fenix, found it!
Here's a pic. Let me know if you're still interested. I have all the parts, 2 bearings, shaft collet and a pretty new trust bearing. I also included the shims that I used when it was installed. You may need to + or - shims in order to find the right gapping (.3 to .5mm of play).
PM me your info and we'll work something out. Paypal would be fastest.
fenix, found it!
Here's a pic. Let me know if you're still interested. I have all the parts, 2 bearings, shaft collet and a pretty new trust bearing. I also included the shims that I used when it was installed. You may need to + or - shims in order to find the right gapping (.3 to .5mm of play).
PM me your info and we'll work something out. Paypal would be fastest.
GreatĦĦĦ
I´m busy at office sorry as soon i have time i will let you know ..
today
lot of thanks
09-29-2004, 06:48 AM
#9
Originally posted by kidDynomite
fenix, found it!
Here's a pic. Let me know if you're still interested. I have all the parts, 2 bearings, shaft collet and a pretty new trust bearing. I also included the shims that I used when it was installed. You may need to + or - shims in order to find the right gapping (.3 to .5mm of play).
PM me your info and we'll work something out. Paypal would be fastest.
fenix, found it!
Here's a pic. Let me know if you're still interested. I have all the parts, 2 bearings, shaft collet and a pretty new trust bearing. I also included the shims that I used when it was installed. You may need to + or - shims in order to find the right gapping (.3 to .5mm of play).
PM me your info and we'll work something out. Paypal would be fastest.
How much do you want for the clutch ĦĦĦ
It will be ship to Laredo Tx 78045
Thank youĦĦĦ
09-29-2004, 10:37 AM
#10
Originally posted by fenix
Hi againĦĦĦ
How much do you want for the clutch ĦĦĦ
It will be ship to Laredo Tx 78045
Thank youĦĦĦ
Hi againĦĦĦ
How much do you want for the clutch ĦĦĦ
It will be ship to Laredo Tx 78045
Thank youĦĦĦ
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
