Kyosho v-one rrr
12-26-2004, 06:15 PM
#991
Guys, I got to try out the new 4mm shock tower from Skyline Racing today and I'm very happy with it. Sturdy, mounts perfectly and the 2 optional holes help in tuning although I didn't use it today. It's similar to the Kyosho shock tower used at the IFMAR Worlds only 1.5mmm thicker in construction. This is one of the only few hop-ups neccessary for the car.
12-26-2004, 06:20 PM
#992
JR sucks in the servo department. Both of my JR servos burned out, and it was set up right. Go for either Hitec, Futuba or KO propo servos.
12-26-2004, 06:30 PM
#993
Tech Master
Originally posted by compaq888
JR sucks in the servo department. Both of my JR servos burned out, and it was set up right. Go for either Hitec, Futuba or KO propo servos.
JR sucks in the servo department. Both of my JR servos burned out, and it was set up right. Go for either Hitec, Futuba or KO propo servos.
KO 2143 been using this as steering servo eversince they came out so probably like 3~4yrs now
Futaba 9451 both steering and throttle on my MRX havent had any problem since day one
Hitec, I have used Hitec servos on my 5th before, 1/4 scale for steering, High Torque for throttle and front hydralic brakes, the one for hydralic burnt out once, but it was my bad, epa wasnt set up right but Hitec warranty is very good, I just sent it in and fix it for me no question asked!
12-26-2004, 08:12 PM
#994
I went with hitec because of the speed and the torque and for thier nice warrenty.
Btw, I have a futaba for my throttle now. S3003
Btw, I have a futaba for my throttle now. S3003
12-27-2004, 12:19 AM
#995
Re: Front Diff
Originally posted by Kyofan
You'll need the to use the #10 servo saver aka ackerman as well as using different flange balls to lower the steering rods because the ball end will hit the diff if you don't. I used the shock flange balls and a couple of3mm washers to get it to clear. Here are the parts you'll need:
Gear set part # VZ012, Bevel Shafts part# BS107,Diff Joint (19)part # VZ218, O-Rings Part # VZW020-01, 5.8mm flange balls...the ones used on the shocks, part # VZ225
You'll need the to use the #10 servo saver aka ackerman as well as using different flange balls to lower the steering rods because the ball end will hit the diff if you don't. I used the shock flange balls and a couple of3mm washers to get it to clear. Here are the parts you'll need:
Gear set part # VZ012, Bevel Shafts part# BS107,Diff Joint (19)part # VZ218, O-Rings Part # VZW020-01, 5.8mm flange balls...the ones used on the shocks, part # VZ225
I just got all the parts that you asked me to order. But i Think it is missing the cup/ housing. do you think it will be same as the v one rr ? I hope coz i got a spare one of those lying around.
At the Kyosho world cup i saw some of the rubber tyre users here they were putting a paste on the top of their brand new tyres. Would you know what that is and what it does.. I guesss its extra grip or long life for the 20 min. qualifying....
regards
Aziz
12-27-2004, 12:38 AM
#996
Re: Re: Front Diff
Originally posted by uaerc
Hi
At the Kyosho world cup i saw some of the rubber tyre users here they were putting a paste on the top of their brand new tyres. Would you know what that is and what it does.. I guesss its extra grip or long life for the 20 min. qualifying....
regards
Aziz
Hi
At the Kyosho world cup i saw some of the rubber tyre users here they were putting a paste on the top of their brand new tyres. Would you know what that is and what it does.. I guesss its extra grip or long life for the 20 min. qualifying....
regards
Aziz
Should check if you are allowed to use it as it is banned in UK and Euro events on IC cars.
12-27-2004, 09:04 AM
#997
Anybody know what online HK shops have the 15,16 and 17t first gears in stock for the RRR?
Cheers
Cheers
12-27-2004, 09:38 AM
#998
Tech Rookie
Hello- thinking of futaba digital servos, how are they ? Thanks
12-27-2004, 03:19 PM
#999
look in the above posts, we just discussed what servos are good.
12-30-2004, 11:57 PM
#1000
Tech Adept
just a heads up...
In the Febuary issue of Radio Control Car Action, they finally review the RRR and give it excellent ratings. Those interested should check out the article.
In the Febuary issue of Radio Control Car Action, they finally review the RRR and give it excellent ratings. Those interested should check out the article.
12-31-2004, 06:03 AM
#1001
WERKS Racing 5-Port AAC .12 Engine, This is a Lamberto Collari eng..
Howz this engine and has anyone used this on the RRR. I suspect this to be a Mod. Sirio is it true ?
How would this engine perform in hot climate..
Regards
Aziz
Howz this engine and has anyone used this on the RRR. I suspect this to be a Mod. Sirio is it true ?
How would this engine perform in hot climate..
Regards
Aziz
01-01-2005, 02:14 AM
#1004
Originally posted by JordanC
Has anybody tried out the black clutch fly-wieghts
Has anybody tried out the black clutch fly-wieghts