R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Nitro On-Road

Reply
 
Thread Tools Search this Thread
Old 12-12-2005, 02:05 AM   #4381
Tech Elite
 
Bundy_Bear's Avatar
 
Join Date: Apr 2004
Location: Brisbane, Qld
Posts: 2,682
Trader Rating: 11 (100%+)
Default

Quote:
Originally Posted by BrainTeased
Hey bundy bear

i have used both futaba s9550 and s9451 and the 2.5 mm spacer works best as it gives enough clearance from the top deck opening.

i to am using the 24T side pulley but i run foams and i use the 387T belt and although it does seem abit loose but really its fine as when the car is being acccelerated the belt actually tensions as it rotates. Some will tell you to run the side belt as loose as possible to free up the car, a more efficent drivetrain equals more top speed, better fuel economy and lower engine temps
BrainTeased:

Thank you... Also, if i was too use the solid diff at the front do i need to shim the inside the same as the diff?

BB
__________________
MissMooRC Racing
Find us on Facebook https://www.facebook.com/missmoorc
Bundy_Bear is offline   Reply With Quote
Old 12-12-2005, 02:22 AM   #4382
Tech Rookie
 
Join Date: Dec 2005
Location: madrid-spain
Posts: 6
Default

Quote:
Originally Posted by tifosi_es
hello out there, this is victor from madrid-spain, this is my first post and i want to say hi to all you, so, i want to know where i can to find the
K FACTORY optionals parts for my RRR:

http://www.kfactoryracing.com/proli...301120805-97109

these parts are hard to find here in spain, please if anybody got these optional parts, let me know where found them, wich shop ?


try rcmart.com or shopping.rcmodel.hk

they ship anywhere around the globe and they're the cheapest place you can find hop-ups for Asian products
.

rcmart.com, rc-mushroom, rc-union, rcsquare.com, shopping.rcmodel, presicionrc.com, etc, have not the K Factory options for sell, anybody knos in waht shop i can to find these optional parts ???
thanks
tifosi_es is offline   Reply With Quote
Old 12-12-2005, 02:46 AM   #4383
Tech Master
 
BrainTeased's Avatar
 
Join Date: Jan 2004
Location: Melbourne
Posts: 1,342
Trader Rating: 4 (100%+)
Default

Quote:
Originally Posted by Bundy_Bear
BrainTeased:

Thank you... Also, if i was too use the solid diff at the front do i need to shim the inside the same as the diff?

BB
sorry BB i actually use a solid diff from the vones 3 so there are no shimming involved

if you want part numbers let me know the vones 3 solid diff is much better it looks just like a one way (its not in a diff housing) but the solid diff housing is plastic.

cheers BT
__________________
www.feralbatteries.com.au
BrainTeased is offline   Reply With Quote
Old 12-12-2005, 03:13 AM   #4384
B4
Tech Addict
 
B4's Avatar
 
Join Date: Mar 2003
Location: Australia
Posts: 642
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by BrainTeased
sorry BB i actually use a solid diff from the vones 3 so there are no shimming involved

if you want part numbers let me know the vones 3 solid diff is much better it looks just like a one way (its not in a diff housing) but the solid diff housing is plastic.

cheers BT
Could you please post the part numbers for the V-One-SIII solid diff.

Thanks
B4 is offline   Reply With Quote
Old 12-12-2005, 10:06 AM   #4385
Tech Prophet
 
Randy Caster's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Costa Mesa, CA
Posts: 16,675
Trader Rating: 46 (100%+)
Default

Quote:
Originally Posted by jeffreylin
Randy when are you going to come race at Revelation?
I'll be there a couple days this week practicing/testing, not sure when I'll be out there to race though.
Randy Caster is offline   Reply With Quote
Old 12-12-2005, 11:14 AM   #4386
Tech Elite
 
jeffreylin's Avatar
R/C Tech Charter Subscriber
 
Join Date: Nov 2003
Location: Traction Roll!
Posts: 2,564
Default

Quote:
Originally Posted by Randy Caster
I'll be there a couple days this week practicing/testing, not sure when I'll be out there to race though.
Well have fun--I think you'll like nitro and the RRR. Hope to see you at one of the races soon.
jeffreylin is offline   Reply With Quote
Old 12-12-2005, 11:44 AM   #4387
Tech Prophet
 
Randy Caster's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Costa Mesa, CA
Posts: 16,675
Trader Rating: 46 (100%+)
Default

Im sure it wont be long before I come out to the nitro races, just gotta find a pit guy.
Randy Caster is offline   Reply With Quote
Old 12-13-2005, 02:16 AM   #4388
Tech Elite
 
freefallmarine's Avatar
 
Join Date: Jul 2003
Location: Dallas TX
Posts: 2,170
Trader Rating: 9 (100%+)
Default Happy Holidays Guy's and Gal's.

Drapping tinsel on my RRR and driving around the house. 30% smells soooo good. Damn the offseason! Merry Ho HO's.. Semper Fi ! Carl.
freefallmarine is offline   Reply With Quote
Old 12-13-2005, 06:08 PM   #4389
Tech Champion
 
GMartinez's Avatar
 
Join Date: Dec 2004
Location: Sunshine State
Posts: 8,161
Trader Rating: 85 (100%+)
Default

Quote:
Originally Posted by BrainTeased
sorry BB i actually use a solid diff from the vones 3 so there are no shimming involved

if you want part numbers let me know the vones 3 solid diff is much better it looks just like a one way (its not in a diff housing) but the solid diff housing is plastic.

cheers BT
? Will the spool that is made by Kfactory fit in the V1RRR WCE I know for the V1RRR it did
__________________
www.fullthrottlercraceway.com
Home of The U.S. World Nitro Cup 2013,2014,2015,2016
2014 Roar Electric Nationals, IFMAR ISTC Worlds, 2015 Roar Fuel Nationals
2017 U.S.World Nitro Cup Nov 29th - Dec 3rd
U.S.Open Fuel Championship Returning soon
GMartinez is offline   Reply With Quote
Old 12-13-2005, 07:21 PM   #4390
Tech Master
 
Join Date: Aug 2004
Posts: 1,041
Trader Rating: 38 (100%+)
Default

I'm looking at both this car and the Mugen. What has me leaning towards the Mugen is that I cannot find many places carrying Kyosho parts. What online place (besides Ebay) is good for onroad Kyosho parts?
Breakin2 is offline   Reply With Quote
Old 12-13-2005, 07:26 PM   #4391
Tech Fanatic
 
ogreasurada's Avatar
 
Join Date: May 2005
Location: SZ-China
Posts: 848
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by Breakin2
I'm looking at both this car and the Mugen. What has me leaning towards the Mugen is that I cannot find many places carrying Kyosho parts. What online place (besides Ebay) is good for onroad Kyosho parts?
www.brooklynhobbies.com carries Kyosho parts, tho they dont really list all of them on their web site, they have a wall of Kyosho parts at the store, just give them a call for Richie and he will get u the stuff u need. Good luck.
ogreasurada is offline   Reply With Quote
Old 12-13-2005, 07:29 PM   #4392
Tech Fanatic
 
ogreasurada's Avatar
 
Join Date: May 2005
Location: SZ-China
Posts: 848
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by 710baby
? Will the spool that is made by Kfactory fit in the V1RRR WCE I know for the V1RRR it did
The only difference between the WCE and the regular car is just some factory (like CF parts and universals) upgrades, the rest of the cars are the same. I seen people installed it on their WCE's. However I heard minor modification is needed.
ogreasurada is offline   Reply With Quote
Old 12-13-2005, 08:12 PM   #4393
Tech Fanatic
 
AndyT 's Avatar
 
Join Date: Sep 2004
Location: Sydney Australia
Posts: 862
Default

Quote:
Originally Posted by Breakin2
What online place (besides Ebay) is good for onroad Kyosho parts?
Try www.rc-mushroom.com
www.rcmart.com
www.rcsquare.com
Also Rc-Champ in Japan and Rc Toro (USA) have plenty of RRR parts & hop-ups.
Cheers
AndyT  is offline   Reply With Quote
Old 12-13-2005, 08:21 PM   #4394
Tech Champion
 
GMartinez's Avatar
 
Join Date: Dec 2004
Location: Sunshine State
Posts: 8,161
Trader Rating: 85 (100%+)
Default

Quote:
Originally Posted by AndyT
Try www.rc-mushroom.com
www.rcmart.com
www.rcsquare.com
Also Rc-Champ in Japan and Rc Toro (USA) have plenty of RRR parts & hop-ups.
Cheers
Shipping is around $25 to $30 overseas I used to buy from mushroom until Brooklyn hobbies started carry parts & it came out cheaper thru them & shipping was quick 3 days from Ny to florida
__________________
www.fullthrottlercraceway.com
Home of The U.S. World Nitro Cup 2013,2014,2015,2016
2014 Roar Electric Nationals, IFMAR ISTC Worlds, 2015 Roar Fuel Nationals
2017 U.S.World Nitro Cup Nov 29th - Dec 3rd
U.S.Open Fuel Championship Returning soon
GMartinez is offline   Reply With Quote
Old 12-13-2005, 10:54 PM   #4395
Tech Master
 
drfritz's Avatar
 
Join Date: Sep 2001
Location: Vancouver Wa usa
Posts: 1,769
Default

Quote:
Originally Posted by ogreasurada
The only difference between the WCE and the regular car is just some factory (like CF parts and universals) upgrades, the rest of the cars are the same. I seen people installed it on their WCE's. However I heard minor modification is needed.
Got a part #, I'll like to see what it looks like.
drfritz is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
FOR SALE - Mugen MBX5T ProSpec and Kyosho STR with chassis conversion and Kyosho big MattWells R/C Items: For Sale/Trade 5 04-28-2017 10:25 AM
1986 1/12 Kyosho Plazma MKIII With Kyosho LeMan 600E Motor Funkymojo R/C Items: For Sale/Trade 2 05-17-2012 11:11 AM
Custom painted Kyosho SP2 and Kyosho STRR bodies.... RC3 Graphics SWEET W/ PICS CRFXXXT R/C Items: For Sale/Trade 1 01-07-2008 07:38 PM
MACH. 28/NEW PS, KYOSHO MINI INFERNO ST/W/3NEW IB1400 8 CELL PACKS, KYOSHO 1./8 BUGGY newbie2 R/C Items: For Sale/Trade 5 11-18-2007 06:07 PM
Convert Kyosho Quick Start system on Kyosho QRC to Pullstart Morpheus2be Monster Trucks 0 02-16-2005 11:26 PM



Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 04:56 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net