Kyosho v-one rrr
#3121
#3123
PICS
my passion
#3124
Originally Posted by jwf_frani
does anybody know the bearing sizes on the kyosho.
prefferably size, quantity and which part it attaches to.
thanks.
prefferably size, quantity and which part it attaches to.
thanks.
2 - 12x18 oneway
2 - 6x12 front knuckles
2 - 10x15 front knuckles
2 - 6x12 rear bulkhead
2 - 6x12 rear hub
2 - 10x15 rear hub
1 - 6x12x4 two speed
2 - 6x12 middle support shaft
1 - 5x8x2.5 clutch
1 - 5x10x4 clutch
also 6x10 for the servo saver
#3125
Tech Master
iTrader: (6)
Originally Posted by impalabob64
bobby here my buddy just open a hobbystore/raceway PNP hobbies i just got 3 56t spur if you want just pm me and i will get what you need will be carrying the rrr an wc rrr.with a full line of parts.he is stocking everything for the rrr an he,s got the skyline chassie in stock
#3126
Super Moderator
iTrader: (239)
Originally Posted by impalabob64
bobby here my buddy just open a hobbystore/raceway PNP hobbies i just got 3 56t spur if you want just pm me and i will get what you need will be carrying the rrr an wc rrr.with a full line of parts.he is stocking everything for the rrr an he,s got the skyline chassie in stock
#3127
Tech Adept
Originally Posted by NaNa
anyone got some more V1RRR pics to post in here to shared with me pls...
Just for you mate........
Pic 1 Pic 2 Pic 3 Pic 4 Pic 5
Pic 6 Pic 7 Pic 8 Pic 9 Pic 10
Pic 11 Pic 12 Pic 13 Pic 14 Pic 15
Pic 16 Pic 17 Pic 18 Pic 19 Pic 20
Pic 21 Pic 22 Pic 23 Pic 24 Pic 25
Pic 26 Pic 27 Pic 28 Pic 29 Pic 30
Pic 31 Pic 32 Pic 33 Pic 34 Pic 35
Pic 36 Pic 37 Pic 38 Pic 39 Pic 40
Pic 41 Pic 42 Pic 43 Pic 44 Pic 45
Pic 46 Pic 47 Pic 48 Pic 49 Pic 50
Pic 51 Pic 52
I hope you like.
#3128
Tech Fanatic
Originally Posted by Rob Phillips
Is this the same Bobby from P-Town? If so, what up dawgg.
#3129
Tech Elite
Thread Starter
iTrader: (2)
Join Date: Dec 2003
Location: Cebu City, Philippines and Ocala, Florida, USA
Posts: 3,840
Trader Rating: 2 (100%+)
Originally Posted by NiMo
Both have the same overal length.
VSW006 has 52mm shaft (VSW006-01) connected to a 0mm offset wheel shaft (VZW054-02).
VSW007 has 50mm shaft (VSW007-01) connected to a 2mm offset wheel shaft (VZW055-02).
also:
VSW015 has 50mm shaft (VSW007-01) connected to a 0mm offset wheel shaft (VZW054-02)
VZW054 has a 45mm shaft (VZW054-01 connected to a 0mm offset wheel shaft (VZW054-02)
VZW055 has a 40.5mm shaft (VZW055-01) connected to a 2mm offset wheel shaft (VZW055-02)
VZW058 has a 40.5mm shaft (VZW055-01) connected to a 0mm offset wheel shaft (VZW054-02)
Hope this helps
VSW006 has 52mm shaft (VSW006-01) connected to a 0mm offset wheel shaft (VZW054-02).
VSW007 has 50mm shaft (VSW007-01) connected to a 2mm offset wheel shaft (VZW055-02).
also:
VSW015 has 50mm shaft (VSW007-01) connected to a 0mm offset wheel shaft (VZW054-02)
VZW054 has a 45mm shaft (VZW054-01 connected to a 0mm offset wheel shaft (VZW054-02)
VZW055 has a 40.5mm shaft (VZW055-01) connected to a 2mm offset wheel shaft (VZW055-02)
VZW058 has a 40.5mm shaft (VZW055-01) connected to a 0mm offset wheel shaft (VZW054-02)
Hope this helps
#3130
Tech Adept
I saw an insane V-one RRR at the RCX show in CA. It had a carbon fiber chassis sandwitched between aluminum. Anybody else see that or know where to get one?
Chris
Chris
#3131
Tech Elite
iTrader: (2)
Originally Posted by sjr456
2 - 12x18 rear diff
2 - 12x18 oneway
2 - 6x12 front knuckles
2 - 10x15 front knuckles
2 - 6x12 rear bulkhead
2 - 6x12 rear hub
2 - 10x15 rear hub
1 - 6x12x4 two speed
2 - 6x12 middle support shaft
1 - 5x8x2.5 clutch
1 - 5x10x4 clutch
also 6x10 for the servo saver
2 - 12x18 oneway
2 - 6x12 front knuckles
2 - 10x15 front knuckles
2 - 6x12 rear bulkhead
2 - 6x12 rear hub
2 - 10x15 rear hub
1 - 6x12x4 two speed
2 - 6x12 middle support shaft
1 - 5x8x2.5 clutch
1 - 5x10x4 clutch
also 6x10 for the servo saver
#3132
Hey Guys
I have 2 questions For You Guys.
1, Where Can I Buy Kawahara Hop-Up Parts for The RRR
2, What Engine Suits These Cars Best, i was going the buy the sirio WCR but they have been having failures at my local track
1, Where Can I Buy Kawahara Hop-Up Parts for The RRR
2, What Engine Suits These Cars Best, i was going the buy the sirio WCR but they have been having failures at my local track
#3133
Engines, I would say the Novarossi/Mugen X-12.
Superior to the NSR in every way.
Superior to the NSR in every way.
#3134
Originally Posted by DIMO
I have 2 questions For You Guys.
1, Where Can I Buy Kawahara Hop-Up Parts for The RRR
2, What Engine Suits These Cars Best, i was going the buy the sirio WCR but they have been having failures at my local track
1, Where Can I Buy Kawahara Hop-Up Parts for The RRR
2, What Engine Suits These Cars Best, i was going the buy the sirio WCR but they have been having failures at my local track
#3135
Originally Posted by DIMO
I have 2 questions For You Guys.
1, Where Can I Buy Kawahara Hop-Up Parts for The RRR
2, What Engine Suits These Cars Best, i was going the buy the sirio WCR but they have been having failures at my local track
1, Where Can I Buy Kawahara Hop-Up Parts for The RRR
2, What Engine Suits These Cars Best, i was going the buy the sirio WCR but they have been having failures at my local track
I`d be dropping a Rody RB V12 in