R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Nitro On-Road

Reply
 
Thread Tools Search this Thread
Old 06-21-2005, 10:24 AM   #3076
Tech Elite
 
jeffreylin's Avatar
R/C Tech Charter Subscriber
 
Join Date: Nov 2003
Location: Traction Roll!
Posts: 2,564
Default

Quote:
Originally Posted by kidDynomite
Jeffrey, I take it that they're a little more $ than the V-one PB's, but a lot less than Kyosho Ti PB's. Thanks for the info. I'll check with RC Champs to see if they have both of them.
Yea I think just a bit more. That is the first thing I replaced on all my cars. I have not tried the Ti ones but I am sure they work good.
jeffreylin is offline   Reply With Quote
Old 06-21-2005, 10:54 AM   #3077
Tech Fanatic
 
Join Date: Oct 2004
Location: So Florida
Posts: 937
Default

Quote:
Originally Posted by NiMo
VSW007
This will give the rear drive shafts a 2mm offset so you can run 0mm offset wheels.
I've done it to mine.
the vsw007 is the little silver bushings, right?
Joe Chaplow is offline   Reply With Quote
Old 06-21-2005, 10:55 AM   #3078
Tech Elite
 
jeffreylin's Avatar
R/C Tech Charter Subscriber
 
Join Date: Nov 2003
Location: Traction Roll!
Posts: 2,564
Default

Quote:
Originally Posted by joemugen
the vsw007 is the little silver bushings, right?
No it's the entire rear universal with the silver bushing included.
jeffreylin is offline   Reply With Quote
Old 06-21-2005, 10:57 AM   #3079
Tech Fanatic
 
Join Date: Oct 2004
Location: So Florida
Posts: 937
Default

Quote:
Originally Posted by jeffreylin
No it's the entire rear universal with the silver bushing included.
ah, ok. well what i did was buy the dog bones from the regular rrr and the cups that go into the uprights (they come with the small bushings). i think that will work too right?
Joe Chaplow is offline   Reply With Quote
Old 06-21-2005, 11:09 AM   #3080
Tech Elite
 
jeffreylin's Avatar
R/C Tech Charter Subscriber
 
Join Date: Nov 2003
Location: Traction Roll!
Posts: 2,564
Default

Quote:
Originally Posted by joemugen
ah, ok. well what i did was buy the dog bones from the regular rrr and the cups that go into the uprights (they come with the small bushings). i think that will work too right?
I suppose. I just get the whole set from Japan. It's not too bad at about $26 a set.
jeffreylin is offline   Reply With Quote
Old 06-21-2005, 11:12 AM   #3081
Tech Fanatic
 
Join Date: Oct 2004
Location: So Florida
Posts: 937
Default

Quote:
Originally Posted by jeffreylin
I suppose. I just get the whole set from Japan. It's not too bad at about $26 a set.
yeah, but i like to run dog bones in the rear.
Joe Chaplow is offline   Reply With Quote
Old 06-21-2005, 03:18 PM   #3082
Tech Adept
 
uaerc's Avatar
 
Join Date: Nov 2004
Location: UAE
Posts: 236
Default

Nimo.......

I was running dog bones in the front today and they popped out twice .......was thinking of uni's in front but since i moved to diff's in the front.....was wondering will the vsw007's work in the front also.
uaerc is offline   Reply With Quote
Old 06-21-2005, 11:09 PM   #3083
Tech Master
 
Tim Johnson's Avatar
 
Join Date: Feb 2004
Location: Los Angeles
Posts: 1,298
Default

Everyone finding the Kyosho Parts they need ok?
__________________
_______________________________________________________
Support your Local Hobby Shop, because you can't race on Ebay!
_______________________________________________________
Airtronics|Kyosho|
Tim Johnson is offline   Reply With Quote
Old 06-21-2005, 11:38 PM   #3084
Tech Addict
 
Join Date: May 2005
Posts: 727
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by Gearhead3
Everyone finding the Kyosho Parts they need ok?
any suggestions? I tried to order from rc champ, but I just found their price ok. Their discount price is good. But, after extra paypal charge + extra 4% charge + shipping to USA, it adds up more than US shops. I tried to buy a OS .12 TZ(P) T3 from them. After adding up all the fees, it becomes not so good deal !!! I can find better deals in US.

(I have a T5, but I think it is too fast for me. I need one that would last longer since I am still in practice mode)
silverM3 is offline   Reply With Quote
Old 06-21-2005, 11:45 PM   #3085
Tech Master
 
Tim Johnson's Avatar
 
Join Date: Feb 2004
Location: Los Angeles
Posts: 1,298
Default

CLICK HERE FOR THE MAP DEALERS This map gets updated every two weeks or so. Shoot me a PM of where you Live, I will try to find a shop close to you if there is not one on the map. Also Try Ultimate hobbies in Orange, CA. They do mail order, but you have to call them, there web site is for the birds.
__________________
_______________________________________________________
Support your Local Hobby Shop, because you can't race on Ebay!
_______________________________________________________
Airtronics|Kyosho|
Tim Johnson is offline   Reply With Quote
Old 06-21-2005, 11:48 PM   #3086
Tech Adept
 
Join Date: Jan 2004
Location: Texas
Posts: 105
Trader Rating: 19 (100%+)
Default

Quote:
Originally Posted by Gearhead3
Everyone finding the Kyosho Parts they need ok?
I ordered some parts directly from Kyosho a few days ago. Everything was priced at retail, but they claimed to have everything I needed in stock.
sjr456 is offline   Reply With Quote
Old 06-22-2005, 12:01 AM   #3087
Tech Master
 
Tim Johnson's Avatar
 
Join Date: Feb 2004
Location: Los Angeles
Posts: 1,298
Default

I would recomend supporting your LHS before Going to Kyosho direct, Even though they only sell Parts direct, it is allways best to get parts from your LHS.
__________________
_______________________________________________________
Support your Local Hobby Shop, because you can't race on Ebay!
_______________________________________________________
Airtronics|Kyosho|
Tim Johnson is offline   Reply With Quote
Old 06-22-2005, 05:31 AM   #3088
Tech Master
 
NiMo's Avatar
 
Join Date: May 2004
Location: Luton, England
Posts: 1,704
Default

Quote:
Originally Posted by uaerc
Nimo.......

I was running dog bones in the front today and they popped out twice .......was thinking of uni's in front but since i moved to diff's in the front.....was wondering will the vsw007's work in the front also.
No! it';s VSW015 for the front.
Same length shafts but 0mm offset wheel shaft.
NiMo is offline   Reply With Quote
Old 06-22-2005, 06:29 AM   #3089
Tech Fanatic
 
Join Date: Oct 2004
Location: So Florida
Posts: 937
Default

Quote:
Originally Posted by silverM3
any suggestions? I tried to order from rc champ, but I just found their price ok. Their discount price is good. But, after extra paypal charge + extra 4% charge + shipping to USA, it adds up more than US shops. I tried to buy a OS .12 TZ(P) T3 from them. After adding up all the fees, it becomes not so good deal !!! I can find better deals in US.

(I have a T5, but I think it is too fast for me. I need one that would last longer since I am still in practice mode)
it does not save any money to order engines, kits, etc. from rc champ... but if you order $200 or more of parts, you save a lot of money.
Joe Chaplow is offline   Reply With Quote
Old 06-22-2005, 06:31 AM   #3090
Tech Adept
 
Join Date: Dec 2004
Location: Dundee
Posts: 138
Default

Hi, someone mentioned titanium Drivshafts made by east racing?
I cant find their website.
Does anyone have it?
Thanks
rcrossco_1 is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
FOR SALE - Mugen MBX5T ProSpec and Kyosho STR with chassis conversion and Kyosho big MattWells R/C Items: For Sale/Trade 5 04-28-2017 10:25 AM
1986 1/12 Kyosho Plazma MKIII With Kyosho LeMan 600E Motor Funkymojo R/C Items: For Sale/Trade 2 05-17-2012 11:11 AM
Custom painted Kyosho SP2 and Kyosho STRR bodies.... RC3 Graphics SWEET W/ PICS CRFXXXT R/C Items: For Sale/Trade 1 01-07-2008 07:38 PM
MACH. 28/NEW PS, KYOSHO MINI INFERNO ST/W/3NEW IB1400 8 CELL PACKS, KYOSHO 1./8 BUGGY newbie2 R/C Items: For Sale/Trade 5 11-18-2007 06:07 PM
Convert Kyosho Quick Start system on Kyosho QRC to Pullstart Morpheus2be Monster Trucks 0 02-16-2005 11:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 07:02 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net