R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Nitro On-Road

Closed Thread
 
Thread Tools Search this Thread
Old 05-06-2002, 07:01 PM   #1
Tech Initiate
 
Join Date: May 2002
Posts: 29
Default osrockets piston/sleeve renewing

i have had several request to start posting this process to make it available to all you racers, we have been doing it for over 18 months now with great success and it lasts longer than new ones, i have been receiving them from brazil,south america,canada,germany etc and all over the U.S., it only takes a day or two to turn around and as long as your piston/sleeve is not marred up and/or pitted it is very impressive you can read over 725 replies since jan,2002
alone on this link below and the charge is only 20.00 plus 5.00 for shipping/handling, you pull your piston/sleeve out and you can leave the rod attached and mail it to me and i will send it back. here is the link::::
http://www.rc-racing.com/cgi-bin/bac...Aoffroad4%3A41

Last edited by osrocket; 05-07-2002 at 03:54 AM.
osrocket is offline  
Old 05-06-2002, 07:52 PM   #2
Company Representative
 
ammdrew's Avatar
 
Join Date: Feb 2002
Posts: 10,598
Trader Rating: 25 (100%+)
Default

link do not work
ammdrew is offline  
Old 05-06-2002, 08:01 PM   #3
Tech Initiate
 
Join Date: May 2002
Posts: 29
Default

ammdrew try that link now and see if it will work . johnb
osrocket is offline  
Old 05-07-2002, 04:58 AM   #4
Tech Elite
 
stefan's Avatar
 
Join Date: Aug 2001
Location: Bavaria, Germany
Posts: 3,273
Send a message via AIM to stefan
Default

John,

I'm itching to get my 3 sets back and see how they are.

Have only heard good things so far about your work.
stefan is offline  
Old 05-07-2002, 11:41 PM   #5
Tech Initiate
 
Join Date: May 2002
Posts: 29
Default

i do this on the other grids the 5th person to email me regarding the special on the NITRO ON ROAD SECTION, will receive one free piston/sleeve renewing all you have to send me is 5.00 to cover the shipping>>> jb
osrocket is offline  
Old 05-08-2002, 03:39 PM   #6
Tech Adept
 
Join Date: May 2002
Location: Midwest
Posts: 147
Default



John does a really nice job with his process. My OS CV-15 that I had him renew has awesome compression, for the price his work just can't be beat! High marks for price and turnaround time.
-JR
Luckyman4 is offline  
Old 05-08-2002, 05:10 PM   #7
Tech Elite
 
stefan's Avatar
 
Join Date: Aug 2001
Location: Bavaria, Germany
Posts: 3,273
Send a message via AIM to stefan
Default

I just got my 3 sets back today and they look and feel beter than new ones.

Turn around time was 3 days.

Thanks a lot John, I will send more soon.
It doesn't matter what size motor, right?
.12, .15,.21?
stefan is offline  
Old 05-08-2002, 07:05 PM   #8
Tech Initiate
 
Join Date: May 2002
Posts: 29
Default

yes the .12 .15 .21 and i have done some oddball sizes for guys sometimes i wonder where they get these engines, i did couple for a guy in canada that i have never even seen anything like them before, they were a strange size and wierd looking but they came out real nice> jb
osrocket is offline  
Old 05-09-2002, 08:00 AM   #9
Tech Regular
 
Join Date: Aug 2001
Location: Cottage Grove, Minnesota
Posts: 304
Trader Rating: 3 (100%+)
Default OS Rocket ..I have a question?

What exactly are you doing to "renew the sleeves"? Just curious..If you cannot tell for top secret reasons..hey I understand! I dont have anything right now that needs renewal but when I do I am definetly going to look you up!
Thanx,
SWG
simulatedwood is offline  
Old 05-09-2002, 02:51 PM   #10
Tech Initiate
 
Join Date: May 2002
Posts: 29
Default

ok thanks, let me know if you ever want to send one and i will forward all the info that you need to do it. and it only takes a day or two and you will get it right back> jb
osrocket is offline  
Old 05-09-2002, 07:49 PM   #11
RCTech Member #2
 
TSR6's Avatar
R/C Tech Elite Subscriber
 
Join Date: Aug 2001
Posts: 5,951
Trader Rating: 5 (100%+)
Send a message via ICQ to TSR6
Default

Hi, We don't allow open advertising within the forums. Please check out the Advertising page for information on advertising with RCTech.

http://www.rctech.net/pages/advertising.shtml

-Troy
__________________
Troy
RCTech Member #2

The postings and views expressed on this site are my own and do not necessarily reflect the positions, strategies, or opinions of any company I may be employed by.
TSR6 is offline  
Closed Thread

Similar Threads
Thread Thread Starter Forum Replies Last Post
HPI .25 w/ new piston and sleeve 1armed1 R/C Items: For Sale/Trade 1 07-15-2008 08:53 AM
Piston/ Sleeve Pleskit Onroad Nitro Engine Zone 6 05-03-2004 11:57 AM
osrockets piston/sleeve renewing osrocket Electric Off-Road 7 07-12-2002 10:06 PM
osrockets piston/sleeve renewing osrocket Racing Forum 1 05-07-2002 11:44 PM
osrockets piston/sleeve renewing osrocket Australian Racing 0 05-07-2002 03:58 AM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 08:59 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net